Toyota Camry immo

[makura]

Hi out there.
i have a toyota camry 2003 model, my panel beater lost the keys to this car,so i had an ordinary key cut,now ican turn on the ignition.i then read the 98c46 in the ECU,did the immo killer on the hex file,reprogrammed the eeprom using the new file from the immo killer program.
Now my problem is that the security light is still active,the alarm is going on and off,how do i get this car to start?
do i have to get another key?
or can i by pass something for it to start since the ecu has had its immo file removed.

:stupid:

[sogaro]

Doubt if you can do immo off this car, get a T300 or SBB or better still return the data in the ECU eeprom and read the immo eeprom instead and program a virgin file into it and do matching. Is it a V6 or not? IF you can not get a virgin file upload your dump and read your existing key data and upload it too

[makura]

Doubt if you can do im*o off this car, get a T300 or SBB or better still return the data in the ECU eeprom and read the im*o eeprom instead and program a virgin file into it and do matching. Is it a V6 or not? IF you can not get a virgin file upload your dump and read your existing key data and upload it toothis car is not a v6 engine,its 2.0 engine,i have opened the im*o unit and it only has the RF modulator chip,no eeprom there.here is my original eprom dump from the ecu,may be this will help in telling the type of car iam dealing with. :roflmao:

[waliddahan]

this car is not a v6 engine,its 2.0 engine,i have opened the im*o unit and it only has the RF modulator chip,no eeprom there.here is my original eprom dump from the ecu,may be this will help in telling the type of car iam dealing with. :roflmao:
hello
please chek u.r dump its not curect
after that i thenk can help u

[makura]

what do you mean its wrong?i dont understand thats what i got from from my eeprom,can you elabolarate.

[simon77]

post ecu details as the bin file looks to small

[rashid01]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/372946260/CAMRY_2003_E-C-T_K.html)

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/372946442/camry-2003-V-6_M.html)

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/372946667/camry-2003-V-4_K.html)

try that three file that is ready to start the car
frist one for auto ger second one for 6 selander amnd last one 4 selander but maNUL GER

[rashid01]

TO CHECK OUT WERE IS UR EPPROM IC IN ECU OR IN IMOBILIZER WHEN U TAKE OUT THE ALL LED FROM COMPUTER AND SURTY LIGHT GO OFF THAT MEAN EPPRON IC IN COMPUTER IF THE SCCOURTY LIGHT WORK NORMLY EVEN TAKE OUT ECU THAT MEAN EPROM IC IN IMMOBILIZER
IC FOR AUTO GEAR 93C 86 FOR MANUAL 93C56 93C66

[makura]

post ecu details as the bin file looks to small
these are the of the car,its a toyota camry 2004 model,engine control box 89661_31650,model ACV31R_AEPNKW,vin num jtdbh38k200009405,engine num 1az1367934.cylinder key set 69005_3t141.
its a automatic transmition. :stupid:

[rashid01]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/373324989/CAMRY_2004_E-C-T_K.html)
this is the virgin file for toyota camry 2004 auto ger 4 selander there is ic use in ecu 93c86

[rashid01]

if ur car is 6 selander then u take out ic from immobilizer and there is ic use 93lc66
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/373325981/camry-2004-V-6_M.html)

[rashid01]

i also need virgin file toyota camry 98 auto ger any one have plz shere

[makura]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/373324989/CAMRY_2004_E-C-T_K.html)
this is the virgin file for toyota camry 2004 auto ger 4 selander there is ic use in ecu 93c86
thanks very much,so if the dump i posted was wrong,this means i have messed up my ecu dump.
in my ecu i have 93c56.will this dump take care of every thing or this is just for the immo and not the opparation of the car.if only i could get the virgin dumps for the whole car tha would mean i wont be back here with problems from the same car.
:stupid:

[cjawahir]

notice in the first post you state 93c46 and now you say 93c56.


you said you open the immo and found a rf modulator ic ,

did you desolder the pins and flip the board to see this , you could damage this transponder amplifer .

no immo off for this car .

cj

[rashid01]

ok u say ur car ecu ic is 93c56 it may u wrang 93c56 use only camry manual transmition not in Auto transmation auto ger ecu ic is 93c86 and if u have 6 selander car ur ic is in immobilizer and ic 93lc66

[rashid01]

take out any mantion ic from ecu or immobilizer programe that mantion file then agine sold and fitt in to car then inter key into ignition swich securty light will stop for 2or 3 second then inter next key scurty will stop then inter next key scurty will stop then flesh your programming is of if u want only one key inter key into ignation scourty will stop then press 5 time petrol pedal then 6 time brake then styart

[makura]

take out any mantion ic from ecu or im*obilizer programe that mantion file then agine sold and fitt in to car then inter key into ignition swich securty light will stop for 2or 3 second then inter next key scurty will stop then inter next key scurty will stop then flesh your programming is of if u want only one key inter key into ignation scourty will stop then press 5 time petrol pedal then 6 time brake then styart
ok, i know you are trying to help me here,but i cant make heads or tails of this post.
any mantion ic...............please better english,if any one know this procedure please make it clearer for everyone here.
thank you never the less,given time i could try and figure out what was the massage was meant to be. :stupid:

[makura]

i think it says reprogram chip with the virgin files,put the key in,turn the key on then press exelarater x number of times them the brake pedal x number of times,them start the car,the vuuuuuum,i stand to be corrected

[makura]

take out any mantion ic from ecu or im*obilizer programe that mantion file then agine sold and fitt in to car then inter key into ignition swich securty light will stop for 2or 3 second then inter next key scurty will stop then inter next key scurty will stop then flesh your programming is of if u want only one key inter key into ignation scourty will stop then press 5 time petrol pedal then 6 time brake then styart
ok, i know you are trying to help me here,but i cant make heads or tails of this post.
any mantion ic...............please better english,if any one know this procedure please make it clearer for everyone here.
thank you never the less,given time i could try and figure out what was the massage was meant to be. :stupid:

[pkeeney]

ok u say ur car ecu ic is 93c56 it may u wrang 93c56 use only camry manual transmition not in Auto transmation auto ger ecu ic is 93c86 and if u have 6 selander car ur ic is in im*obilizer and ic 93lc66
Board address is ic900 on most denso ecu

[pkeeney]

First step buy and ic programmer and a 8 pin soic clip so you don't have to unsolder anything. Then remove ecu from car remove the four screws from top and two more after you remove cover flip board over look for board address ic900 load the .bin file to you ic programmer software and connect the soic clip to the chip then re-flash.Then put everything back the way you found it. You will need three keys for light to shut off on older Toyota's two master and one valet. don't turn car on just put key in key way and wait two seconds then remove key then add the other keys by doing the same.