View Full Version : Can I programm 29f400
GolfmkI
5th April, 2010, 09:54 PM
I have Upa usb, Xprog-m can I at this moment read and programm 29f400 ??
florinyes
5th April, 2010, 10:11 PM
You need BDM100 if you after a cheap tool..
GolfmkI
5th April, 2010, 10:18 PM
You need BDM100 if you after a cheap tool..
What do you mean?? BDM100 is a programmer?
Has not bdm adaptor in x-Prog-M??
Thanks
kevfield
5th April, 2010, 10:38 PM
florinyes is saying that you cant use the tools you have to program 29f400/200, other cheep tool is willem with psop44 adapter
GolfmkI
5th April, 2010, 10:40 PM
Thanks to both. I will buy another programmer.
joaosom
6th April, 2010, 03:36 AM
I have Upa usb, Xprog-m can I at this moment read and programm 29f400 ??
USE WILLEM , IS VERY GOOD
steveeprom
6th April, 2010, 06:49 AM
hi
for all chips eprom 28f512 29f200 -400-800 e.t.c e.t.c
you need desk programer.
I use LAB-TOOL 48 is very good and now support and usb
rappttor
7th April, 2010, 08:20 PM
for a 29f400/200 you will need indeed a progammer that can do flashes (labtool, willem, wellon etc)
bdm is just for ecu with mpc 555/6,(ex edc16), no good for you...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.