Zappi14
3rd March, 2024, 04:58 PM
Hello,
I'm trying my luck on this forum. I have a theft return 2017 Huracan (insurance purchase).
The vehicle was recovered without a key, without front BCM and BCM 2 (rear BCM).
The first attempt was obviously to order a new set of keys for the correct chassis, a new front BCM and a new rear BCM from the dealer. I tried the official solution, new parts ordered with the chassis but obviously, no luck. Odis online, IMMO procedure new identity, get error « FAZ1570E Impossible because no parts assigned to the car ». Support and dealer cannot help me.
I am therefore looking for another solution to start this vehicle.
I see several tools capable of processing BCM 2 (VVDI, Keymaster POLDIAG, Abrites, iProg+, SMOK VW IMMO TOOL, Yanhua).
From what I read, the Huracan is similar from an IMMO point to the Audi A6 (5th generation immo).
If I understand correctly, the immobilizer is in the following elements on this vehicle:
-BCM2, ELV, TCU, DME1, DME2
With the right tools, I should be able to read the DME and ELV.
However, I can't find any tools to extract the CS from the TCM DL800... Possibly an emulator can partially solve this problem?
Alternatively, I found a complete set of ECU from an R8 with the same BCM2 references with key.
What do you think ? Is it possible to adapt used kit ?
I welcome any information, help and am obviously willing to pay if someone can offer me a solution.
Many thanks in advance
I'm trying my luck on this forum. I have a theft return 2017 Huracan (insurance purchase).
The vehicle was recovered without a key, without front BCM and BCM 2 (rear BCM).
The first attempt was obviously to order a new set of keys for the correct chassis, a new front BCM and a new rear BCM from the dealer. I tried the official solution, new parts ordered with the chassis but obviously, no luck. Odis online, IMMO procedure new identity, get error « FAZ1570E Impossible because no parts assigned to the car ». Support and dealer cannot help me.
I am therefore looking for another solution to start this vehicle.
I see several tools capable of processing BCM 2 (VVDI, Keymaster POLDIAG, Abrites, iProg+, SMOK VW IMMO TOOL, Yanhua).
From what I read, the Huracan is similar from an IMMO point to the Audi A6 (5th generation immo).
If I understand correctly, the immobilizer is in the following elements on this vehicle:
-BCM2, ELV, TCU, DME1, DME2
With the right tools, I should be able to read the DME and ELV.
However, I can't find any tools to extract the CS from the TCM DL800... Possibly an emulator can partially solve this problem?
Alternatively, I found a complete set of ECU from an R8 with the same BCM2 references with key.
What do you think ? Is it possible to adapt used kit ?
I welcome any information, help and am obviously willing to pay if someone can offer me a solution.
Many thanks in advance