PDA

View Full Version : Astra F - 1995 - IMMO OFF



kennovic
6th March, 2024, 10:57 PM
Hi guys,

I wanted to ask if any of you have a tested IMMO OFF solution for an Opel Astra F - 1995 - Simtec 56(.1) ECU?
I read the data from the 93C56 & NM27C256NE with the Willem Eeprom Programmer and hope that someone can help me.

I'm really not sure whether the immobilizer is stored on the 27256 or on the 93C56.
Unfortunately I can no longer tell whether it is a Simtec56 or Simtec 56.1 ECU.

The 27C256 also doesn't have a round opening in the middle where the UV rays could penetrate, so I delete everything and then write it again.
I have the feeling that it can only be extinguished with additional power of 14V. Does anyone have a clue?

I would be really grateful if someone could help me with this.

Thanks in advance!

1015335

credoline
7th March, 2024, 05:08 PM
Give numbers from engine ecu. And ccm3 engine is ? If 27C256 its not UV erasable, then you have OTP memory and you must use new one, maybe.

kennovic
13th March, 2024, 04:32 PM
Give numbers from engine ecu. And ccm3 engine is ? If 27C256 its not UV erasable, then you have OTP memory and you must use new one, maybe.

It is a Astra F - 1.8 - 16V

Unfortunately I no longer have the label, but I researched for a long time and found out that it should be the following model:


(Chip cannot be erased, but I now have a new chip and can write IMMO OFF there)


90519065
Siemens 5WK9078


I received the Immo off for 93c56.


Now I need the IMMO OFF data for 27C256.

I only have 1 Attempt.

Hayssam1
13th March, 2024, 11:08 PM
there immo stored in 27C256

for Simtec 56.1 immo off rafal (https://www.digital-kaos.co.uk/forums/member.php/192493-rafal) he has solution

antonis132
14th March, 2024, 12:07 AM
start your car friend
pass with pm after thanks and reputation

antonis132
14th March, 2024, 12:47 AM
yes i have 27C256 immo off for simtec 56.1, but mine is ready with serial numbers starting, yours does not contains serial numbers it is bad reading or something else than 56.1
try with 1st eeprom disconnect immobox if no starts then 27C256 hope your device writes well

credoline
14th March, 2024, 04:48 PM
You are bad read 27C256 !!

Hayssam1
14th March, 2024, 06:15 PM
Hi guys,

I wanted to ask if any of you have a tested IMMO OFF solution for an Opel Astra F - 1995 - Simtec 56(.1) ECU?
I read the data from the 93C56 & NM27C256NE with the Willem Eeprom Programmer and hope that someone can help me.

I'm really not sure whether the immobilizer is stored on the 27256 or on the 93C56.
Unfortunately I can no longer tell whether it is a Simtec56 or Simtec 56.1 ECU.

The 27C256 also doesn't have a round opening in the middle where the UV rays could penetrate, so I delete everything and then write it again.
I have the feeling that it can only be extinguished with additional power of 14V. Does anyone have a clue?

I would be really grateful if someone could help me with this.

Thanks in advance!

1015335
Cut off pin 29==> for immo data and 35==> for blinking immo lamp

93c56 immo off

kennovic
18th March, 2024, 07:25 PM
Cut off pin 29==> for immo data and 35==> for blinking immo lamp

93c56 immo off


Hi Hayssam,


I have decided on your solution and will make a statement about its success as soon as I have installed the ECU.


Thank you to everyone who supports me.

kennovic
24th March, 2024, 03:13 PM
Hello, First of all, thank you for the help. The IMMO flashes away, but the vehicle still doesn't start after I copied your data from 93C56. The spark was there before, but it is no longer there.

kennovic
2nd April, 2024, 11:59 PM
Hey guys,


I still haven't been able to solve the problem. There is no IMMO in 93C56.
I read 27C256 again and hope that the programmer did a good job.


Is there a solution for IMMOFF?


Here is the file:

antonis132
3rd April, 2024, 08:39 AM
Immo off on 27C256 and start the engine

kennovic
4th April, 2024, 08:23 PM
Immo off on 27C256 and start the engine

Thanks.

I'll let you know as soon as I get back to the vehicle next week.
I won't forget it because hopefully other people in need can also be helped through this thread in the future.

kennovic
15th April, 2024, 07:40 PM
Immo off on 27C256 and start the engine

I tested the Car today:

No Engine Light
No fuel pump is running
No ignition spark present

I cut PIN 29 because of the immobilizer data.
Now I don't know what to do anymore. I asked Opel for help, but they only gave me some information about the ECU:

Opel Astra F 1.8

Simtec 56 - 90519065
5WK907802

Engine: C18XEL

Does somebody has any idea?