DeLuXe
9th March, 2024, 12:23 PM
Hi,
I have a Volvo V70 2011 D5 with a few faults. I changed the CEM wich was suspected at first but same fault.
CANBUS seem to be ok from OBD to CEM, ECM & ABS. CEM+ECM Sync data & Keys is OK.
I started to think instrument is the culprit of all these faults but arent 110% sure.
DIM have 2 faults and they are:
1.U010000 Lost Communication With Engine Control Module. General Failure Information. No Sub Type Information
2.U014000 Lost Communication With Central Electronic Module. General Failure Information. No Sub Type Information
There is no communcation to ABS as well but no fault codes (after erased in DIM)?
I hope someone can clarify what the issue might be. Car suddenly stop for "Immobilizer fault, try again" but the workshop had it before me have opened almost everything. I have controlled that the is no cables loose or unconnected so that is fine.
Thanks for all the help! :) I can pay for fast and nice support! :)
Best regards,
DeLuXe
I have a Volvo V70 2011 D5 with a few faults. I changed the CEM wich was suspected at first but same fault.
CANBUS seem to be ok from OBD to CEM, ECM & ABS. CEM+ECM Sync data & Keys is OK.
I started to think instrument is the culprit of all these faults but arent 110% sure.
DIM have 2 faults and they are:
1.U010000 Lost Communication With Engine Control Module. General Failure Information. No Sub Type Information
2.U014000 Lost Communication With Central Electronic Module. General Failure Information. No Sub Type Information
There is no communcation to ABS as well but no fault codes (after erased in DIM)?
I hope someone can clarify what the issue might be. Car suddenly stop for "Immobilizer fault, try again" but the workshop had it before me have opened almost everything. I have controlled that the is no cables loose or unconnected so that is fine.
Thanks for all the help! :) I can pay for fast and nice support! :)
Best regards,
DeLuXe