PDA

View Full Version : LG LSP2GTA Locked, help required please


Adzer
12th March, 2024, 06:49 PM
hi, i have a 2015 corsa that had no headunit, fitted a used unit and its displaying a locked message, after some research i see these are vin coded.

what i cant find out is what tool/software is required to read the eeprom dump on these radios?

can anyone offer some advice on what tools/software is required please?
Adzer
14th March, 2024, 09:15 PM
anyone able to help?
MrRepair
15th March, 2024, 07:48 AM
Read eeprom data from radio memory and post here. Also required is your vehicle VIN.
Adzer
15th March, 2024, 08:49 AM
Read eeprom data from radio memory and post here. Also required is your vehicle VIN.

my problem is i do not know what tool or software is required to read the eeprom and thats what im asking for, thanks
shooting
15th March, 2024, 09:23 AM
my problem is i do not know what tool or software is required to read the eeprom and thats what im asking for, thanks

If you don't know this basic information then best take it to your local decoder to decode.




wbr
Adzer
15th March, 2024, 06:58 PM
If you don't know this basic information then best take it to your local decoder to decode.




wbr

must be great to know it all and not need to ask for help.

nobody locally can help me with it hence trying to do it myself, i cant find any info online about going about it other than the odd comment on forums where ppl say it needs done via obd, so im asking what tool/software is required. forums are meant to be here to help people instead of making a sarky comment like you did
shooting
16th March, 2024, 10:34 AM
must be great to know it all and not need to ask for help.

nobody locally can help me with it hence trying to do it myself, i cant find any info online about going about it other than the odd comment on forums where ppl say it needs done via obd, so im asking what tool/software is required. forums are meant to be here to help people instead of making a sarky comment like you did

Ok, first you need to know what memory device you are trying to read,
example: flash module.

You need a Hot air station, approx 200~300 euros for a cheap one.
You need a flash compatible adapter for your programmer, 50~80 euros for an average one.
You need a programmer capable of reading the flash, normally 500 euros.

and flux, all the software etc etc etc.....

Like I said, if you don't have the skills then best take it to your local decoder, there are 100's, and it wasn't "sarky"

Most of us here have invested 1000's of euro's, so don't be so aggressive demanding things!




wbr