Peugeot 206 BSI

[defowach]

Hi. I am new to this forum & hope that someone will be able to help me. I have a P206 whose engine & ECU have been renewed so no start due to immo mismatch. I have decoded the BSI dump & I would like to know if it is imperative to code in the existing key so as to get the engine start or else I can let the BSI in a virgin state & cut the immo wires & that's all. Thank you.Best regards Denis.

[sexyceta]

are the bsi and ecu from the same car.if so get pin match new transponder.i have virginised bsi before but needed new transponder.

[steveeprom]

You must write the same pin that you use with old keys, in the ecu and then program the keys with key programmer or Lexia. do mach key

[pirilla]

I have similar problem.
Ecu from one car, BSI from different car, and both of them to put in a third car.
What can I do?
Virginize BSI, and program keys with pin in ECU???

Thanks.

[defowach]

Hi guys. Many thanks for your infos & ideas. The BSi belongs to the car but ECU is from another car. Doubt if the ECU will accept code from original BSI .Thanks.Denis.

[martin292009]

what do you need? dumps bsi?? dumps ecu??

[Amine13]

Please specify which engine you have here, you have to get virgin dump and code it with the Pin of your bsi to be able to start.