View Full Version : Edc17c60 clone
JCigarra
29th March, 2024, 10:08 PM
Hi guys
Someone haver experience in cloning a edc17c60?
I have pcmtuner, fetrotech, kt200 and tagflash.
What is the best way to do?
I have two ecus with same hardware
Thanks
dtip
30th March, 2024, 01:59 AM
compare flash from old and new, if same you then copy eeprom to new one but it will probably have different OTP area so easier should be immo off in that ecu, or virgin eeprom and coding with lexia
JCigarra
30th March, 2024, 10:30 PM
New ECU have same hardware number but are from a 75hp. The ECU broken are from a 100hp
danielif
31st March, 2024, 05:02 AM
The cloning can be performed through both dumps must be adapted by our staff before the cloning.
antonis132
31st March, 2024, 08:13 AM
Hi i have hardware from 100hp
Panathaole
31st March, 2024, 08:55 AM
Hi guys
Someone haver experience in cloning a edc17c60?
I have pcmtuner, fetrotech, kt200 and tagflash.
What is the best way to do?
I have two ecus with same hardware
Thanks
if you have same HW, then just transfer full flash and eeprom..... and done....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.