View Full Version : Audi a4 in*o off `95
GolfmkI
8th April, 2010, 11:49 AM
I need in*o off in Audi a4 1.8 year 95
Control unit is 0 261 203 938/939
Original ref: 8D0907557C
I have upa usb and Xprog-M, with one would you prefer ti this job?
Thanks
umoussa
8th April, 2010, 03:08 PM
this one is coming by 24C02 but in Bosch numbering system, B5XXX
Read it and post it here
Thanks
GolfmkI
8th April, 2010, 08:05 PM
I have found B58085........and B58258 I supose it is this last one. It is located in the back face of the ecu in a corner???
Very thanks
umoussa
9th April, 2010, 01:02 AM
read both and send
ecuwroc
9th April, 2010, 06:02 AM
I have found B58085........and B58258 I supose it is this last one. It is located in the back face of the ecu in a corner???
Very thanks
B58258 = EEPROM 24C02
GolfmkI
12th April, 2010, 12:45 PM
This is dump of 24c02. Anyone help me to in*o off?
GolfmkI
12th April, 2010, 07:25 PM
Anyone????
I dont find any software to make in*o off this file, thanks in advance for your help.
cristi_onofrei
12th April, 2010, 07:46 PM
load this file
GolfmkI
12th April, 2010, 08:27 PM
load this file
OK, but these is a universal file???
I mean, is the same for all these ecus??? Other times people modify my dump. Believe me I must make over 80 miles to mount again the ecu in car, so I want to be sure it is the correct solution.
Very thanks
cristi_onofrei
12th April, 2010, 08:44 PM
work w/o problem for your model 0 261 203 938/939
I made this
GolfmkI
12th April, 2010, 08:51 PM
work w/o problem for your model 0 261 203 938/939
I made this
OK, I will try. May I cut any wire????? Remember I want to in*o off forever.......What will happen with the in*o ligth in dash? I supose later I must to remove ligth (or led) or cut any wire in dash connector.
Very thanks
cristi_onofrei
12th April, 2010, 08:53 PM
don't need to cut wire but must to remove light
GolfmkI
12th April, 2010, 08:58 PM
don't need to cut wire but must to remove light
Ok I will try, and post results. Its really the first time I make in*o off with a "universal file". I have been checking it and in comparison with mine original one...are very different.
Even mine is 256 bytes and other is 243 bytes...........:afraid:
We will se. Thanks.:top:
cristi_onofrei
12th April, 2010, 09:02 PM
HELLLOOOOO!!!!!!!!!!!!!!!!
IS ZIP FILE
GolfmkI
12th April, 2010, 09:08 PM
HELLLOOOOO!!!!!!!!!!!!!!!!
IS ZIP FILE
Yes but when I unzip it, it is the same 243.....could you upload the file but in .rar???? I have noticed some problems with files uploaded in zip format.
Thanks
cristi_onofrei
12th April, 2010, 09:11 PM
you have rar file
GolfmkI
12th April, 2010, 09:29 PM
Great now It has 256 bytes......I will try and post results tomorrow.
tyrystor
13th April, 2010, 10:07 AM
I need in*o on in Audi a4 1.8 year 95 Quattro
Original ref: 8D0907557C
Control unit is 0 261 203 938/939
Thank You
cristi_onofrei
13th April, 2010, 10:12 AM
this file have immo active
tyrystor
13th April, 2010, 10:26 AM
Thank You!
pipina
23rd December, 2011, 10:37 AM
load this file
Hi, I used your file today. It works 100%. Thanks for having shared your solution.
regards pipina
davidup
23rd January, 2012, 08:18 PM
hello,
I will try with one ECu as I need off. this file is good for all ecus with this serial?
thank you!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.