Virgin dump BSI citroen c-elysee

[optimus777]

Hello,

I am looking for a virgin dump for a citroen c-elysee bsi valeo N01 Ref 9807531580 (eeprom is 95256) (PSA BSI VALEO SC667152+95256 CAN BSI-N0x-00).
Original BSI is damaged by water.
Could someone help please?

Best regards

[Bllinda]

https:/ /www.digital-kaos.co.uk/forums/showthread.php/1051147


Hello,

I am looking for a virgin dump for a citroen c-elysee bsi valeo N01 Ref 9807531580 (eeprom is 95256) (PSA BSI VALEO SC667152+95256 CAN BSI-N0x-00).
Original BSI is damaged by water.
Could someone help please?

Join Date Mar 2021 ;)
Posts 4
Downloads 0
Uploads 0
Thanks Thanks Given 3
Thanks Thanks Received 0 :)
Thanked in 0 Posts :)

[optimus777]

https:/ /www.digital-kaos.co.uk/forums/showthread.php/1051147

Thank you, but the archive is password protected. I contacted the user, but no response.

[macinek102]

test and report

https://mega.nz/file/HfoXyAgb#Fe8RCU6mm9iaS4rdNGWGwzcDTZYuWiZf9Dyg-7zAAo0

pass is the "mileage"

I can upload PIN, VIN and MIELAGE as you need

[optimus777]

test and report

https://mega.nz/file/HfoXyAgb#Fe8RCU6mm9iaS4rdNGWGwzcDTZYuWiZf9Dyg-7zAAo0

pass is the "mileage"

I can upload PIN, VIN and MIELAGE as you need

Wrong password?

PS: Got it. Will test and let you know today.

[optimus777]

Hello, I just tested it today and the VIN number was showing as empty indeed (like ??????????) in diagbox, but I get an error that the confidential code is not empty.

Also here is the dump of the original BSI (the damaged one), the confidental code is J305, yes?

[Bllinda]

Try ....
If you want to know the pin code, read the ECU. And don't forget to press two buttons


Hello, I just tested it today and the VIN number was showing as empty indeed (like ??????????) in diagbox, but I get an error that the confidential code is not empty.

Also here is the dump of the original BSI (the damaged one), the confidental code is J305, yes?

[optimus777]

Try ....
If you want to know the pin code, read the ECU. And don't forget to press two buttons
This time I have some progress. VIN was empty and I successfully coded it. Confidental code/PIN code was also empty this time and I successfully coded it as well. But when I got to the point where I have to program the keys I get an error. Anyone knows what's going on?

[Bllinda]

Upload damp'a I want to take a look, thanks.

[optimus777]

Upload damp'a I want to take a look, thanks.
Here is your virgin file after I did programming with Diagbox. I am still not sure why key programming is failing...
Any ideas?

[optimus777]

So I think I found my problem after all... I will attach some more photos so you can tell me if I am correct.

When I originally tried to clone the old bsi it didn't work (the car didn't start) and I thought I had to actually make the new bsi virgin and program with diagbox. But now I tried again to put the original bsi's eeprom and flash to the new BSI and I noticed this time that the pin code and vin and everything is working, but the car still didn't start and I think it's because the thing the reads the transponder from the key is not working, maybe it got damaged by the water.

There is a parameter in the bsi section in Diagbox called - "Response from the steering wheel switching module or from the electronic key reader to the identification request" and it's always staying as "NO" for me. Is that the thing that shows me the key cannot be read?

Also I have an error with communication with the "Controls under the steering wheel" module. Is this the module where the thing that reads the key's transponder is located?

[Bllinda]

Try ....

P.S. How to tie the keys you will read again bsi, for me?

[optimus777]

Try ....

P.S. How to tie the keys you will read again bsi, for me?
Did you read my latest post?

[Bllinda]

Everything works already? Yes

[Bllinda]

.... .... ....

[optimus777]

Everything was working already. Its just that my controls under steering wheel module is damaged as well. And car cant read key in ignition.