PCR2.1 EGR OFF with active Regen

[JPOne]

Hello,

can anyone please help with EGR OFF but to keep DPF Regen on?
So far I have tried several solutions (hysteresis in normal operating mode ip_tqi_egr_norm, ip_tqi_egr_ena_norm, DaVinci, different file service) and there is allways problem with propper car regeneration.

Tnx in advance,
Kind Regards

[KZSCAR]

Szia REP+KÖSZÖNÖM

[JPOne]

Hi,

Thank you!

Should EGR connector stay plugged or unplugged?

Kind Regards

[jcarballo2]

In the 1.6 tdi when you cancel the EGR afterwards there are always problems with the regeneration of the DPF,
since this engine makes a lot of use of the EGR to do the regeneration.

[KZSCAR]

Hi, you don't need to pull the plug

[Milicija]

Why you post such nonsense? Have you ever tried to datalog egr activation when regen? The valve is not open... Problem comes from bad off, with correct off TVA works, and exhaust temp is spot on... PCR2.1, EDC17 bad egr off leads to TVA always beeing open, regen temp not high enough...
If the file provided is bad tomorrow I can send you correct solution.

[JPOne]

Szia REP+KÖSZÖNÖM

Unfortunately solution does not work P2458 still present, car in limp mode and does not regenerate

[Milicija]

Here is your file.