NEED w203 EZS DUMP HC912

[casiopaya]

Looking for EIS EZS FLASH DUMP for w203.
Ezs Partnumber 209 545 05 08

It must be a dump of w203 or w209

NOT!!! w211....

HC12 3k91d


I can't establishe connection to processor with ROSFAR, so i had to solder it out .
i am using ETL Programmer.. I safes the eeprom part... Flash part is empty.

Tried a Flash dump from w211. Its not 100% working because w211 has extra ?CGW.

W203 has CGW in EIS....

[vitek]

Looking for EIS EZS FLASH DUMP for w203.
Ezs Partnumber 209 545 05 08

It must be a dump of w203 or w203

NOT!!! w211....

HC12 3k91d


try this one

[casiopaya]

there is no dump.....

can you send again?

thanks

[bali motor]

try this dump HC12

[casiopaya]

@bali motor


unfortunatly your dump is not complete.


in your dump is just the information for eeprom Immo


i need the information starting from address 08000

[adikk]

Try it, pass in PM (but it is not my file , i download it from ather forums)

[carself]

Looking dump for SIM4le , engine ecu , need clear dump for adaptation with ezs

[casiopaya]

here is a full flash of hc12 3k91d of w211.

This flash works only on cars with external cgw like w211 and w219.


This is full read eeprom and flash by ETL Programmer hc912
This not works for mine w203.

[casiopaya]

here the flash which i hvae for w211 hc12 3k91d. this is not working 100% for w203, because it has no external cgw.



EEPROM: $00800-$00FFF
EEPROM SHADOW Hi: $000F0
EEPROM SHADOW Lo: $000EF
FLASH Page 0: $08000-$0BFFF
FLASH Page 1: $18000-$1BFFF
FLASH Page 2: $28000-$2BFFF
FLASH Page 3: $38000-$3BFFF
FLASH Page 4: $48000-$4BFFF
FLASH Page 5: $58000-$5BFFF
FLASH Page 6: $68000-$6BFFF
FLASH Page 7: $78000-$7BFFF
ETL Adapter:
112 TQFP: HC912 QFP112
80 QFP: None
Programming Interface:
In-Circuit: Yes
On-Board: Yes


I NEED The information in FLASH PAGE 0 - 7

[bali motor]

@bali motor


unfortunatly your dump is not complete.


in your dump is just the information for eeprom im*o


i need the information starting from address 08000


my dump read with xprog, if you write with etl you must edit this dump.

do you have xprog programmer?

[casiopaya]

@bali

at the moment i dont have xprog-m

i am looking for good one.

however in the dump is the Flash part missing.

My blue Rosfar clone was not able the unsecure the processor. so
i desolder the hc912 out and read/ write it with ETL programmer.

[bali motor]

@bali

at the moment i dont have xprog-m

i am looking for good one.

however in the dump is the Flash part missing.

My blue Rosfar clone was not able the unsecure the processor. so
i desolder the hc912 out and read/ write it with ETL programmer.


if you write with etl. you edit my dump for etl.

Search Result: xprog - - uobd2.com - Professional auto obd tool ,Tacho usb2.5,vag com 908, Key programmer,obd2,eobd2,uobd2,canbus,x431,op-com (http://www.uobd2.com/search/?DirID=&q=xprog)

i buy here, work well.

you see this picture, can read and write with xprog
very easy

[casiopaya]

the point is that yourfile has only eeprom information from flash.

but i need the flash information.


or maybe you can edit it for me?

[adikk]

Sorry, I am upload files without flash :(
I have 209_545_23_08_4l40k full and 209 545 09 08 (C203)
If need, I upload it.

[casiopaya]

i need 209 545 05 08 with hc12 3k91d

[bali motor]

do you need connect cable AK400 to eis?

In Ak400 have this.

see this

[jano]

hello !
I have this one :
EZS4
209 545 19 08
Marquardt
hardware 27/04
software 27/04
Diagnosekennung 0/8
serie 0006 Ohne Keyless Go
reading Rosfar (131kB)

[casiopaya]

I DONT HAVE AK400.

is it possbile to run ak400 software without hardware just to see how it works?


i have rosfar blue clone
and ETL Programmer

[PremierD]

Looking for EIS EZS FLASH DUMP for w203.
Ezs Partnumber 209 545 05 08

It must be a dump of w203 or w209

NOT!!! w211....

HC12 3k91d


I can't establishe connection to processor with ROSFAR, so i had to solder it out .
i am using ETL Programmer.. I safes the eeprom part... Flash part is empty.

Tried a Flash dump from w211. Its not 100% working because w211 has extra ?CGW.

W203 has CGW in EIS....

Found this lying about in an old usb stick mate .. lol give it a go

[casiopaya]

@ premierD



do you know the partnumber of the EZS you took this dump from????


maybbe you know where i can find the partnumber in flash...




it must be a w203


greetings

[PremierD]

@ premierD



do you know the partnumber of the EZS you took this dump from????


maybbe you know where i can find the partnumber in flash...




it must be a w203


greetings



6.......WDC2030162R098345..

Its from a w203 mate

[another_seller]

wondering if this is the one you want

[kautuvera]

Hello,

I lost MCU data for c class w203 2001 MC912DC128ACPV Mask 3K91D QFP112 Part # EZS 2095450508 (ezs inscription: W211_HC12), the car doesn't start and no response when key inserted into EZS.

Please anyone could help me sending EZS dump: eeprom & flash for MCU so i can recover ezs data when generating new bin files from EZS (you provide) and existing ESL/ECU.

Thanks a lot.

[kautuvera]

Hello,

I lost MCU data for c class w203 2001 MC912DC128ACPV Mask 3K91D QFP112 Part # EZS 2095450508 (ezs inscription: W211_HC12), the car doesn't start and no response when key inserted into EZS.

Please anyone could help me sending EZS dump: eeprom & flash for MCU so i can recover ezs data when generating new bin files from EZS (you provide) and existing ESL/ECU.

Thanks a lot.
EIS and ecu..pls

[kautuvera]

I have programed your file which you had attached but there was no use, no result!!. when we want to program the EEPROM part we have an error like the picture I attach

[bali motor]

hi,
your key can turn?

what your problem? please explain your problem now.

this dump original your eis. i have edit and make new key

[kautuvera]

The key turns. EZS is original. I wanted to read EZS information with AK400 programmer but it damaged the EZS and now this is teh problem

[bali motor]

The key turns. EZS is original. I wanted to read EZS information with AK400 programmer but it damaged the EZS and now this is teh problem

use Xprog for read and write this EIS. use another type chip


or may be your programmer error.

and for your cluster blank, you must edit SSID on cluster

if your file original car just make 0km on eis.


regard

[kautuvera]

Hello. I now no problems reading and programming the chip to do but still the error page kilometers

[bali motor]

Hello. I now no problems reading and programming the chip to do but still the error page kilometers

now your car can running?

do you use original file?

if not you edit SSID on cluster.

[kautuvera]

No. The key turns .
Together with the original file with your file and matters km error in the page

[autoenthu]

Hi,
I have w203 with key not turning problem, but my customer brought the new eis with green key, as the dealer does not programme for imports, they can only supply the spares. I tried to to programme the eis with the green key, the key started adaptation but did not turn again.
I have AK400, i tried to read esl, managed to read esl, tried to unlock directly without removing, but failed.
it looks like the problem is in esl!
now how to remove it from the stearing column, does any one have instruction?
or do you have any solution for my problem, please help me.
Thanks

[kautuvera]

Hi
, can you help me the X-PROG how to win or do I connect my wires

[hkirov]

i have same question as Kautuverta, how to wire the EIS on w203, the only difference is that mine is C209_zgw.

[bali motor]

Hi
, can you help me the X-PROG how to win or do I connect my wires

hi. see this

[kautuvera]

Yes bali motor, the same kind was tried and true,

[hkirov]

hi. see this

hi M8 that's great, but could you post the one for the 2005 c class, as mine w203 has EIS number C209_ZGW.

thanks in advance.

[kautuvera]

hi M8 that's great, but could you post the one for the 2005 c class, as mine w203 has EIS number C209_ZGW.

thanks in advance.


Following this you?

[kautuvera]

Who can file on my file for ECU engine build?

[hkirov]

Following this you?

Thanks M8, you are the greatest.
Do you know if i can read the ESL with X-Prog via K-Line without opening it.

Also where did you get the pictures of the EZS do you have them on file withe the rest boards, it will be great if you could share.

[kautuvera]

Thanks M8, you are the greatest.
Do you know if i can read the ESL with X-Prog via K-Line without opening it.

Also where did you get the pictures of the EZS do you have them on file withe the rest boards, it will be great if you could share.


You tell me how to connect without wires so the ESL circuit open?
Wright is also available to you or just read?
teh AK400 K-line because I can read the file

[lovelyirshad]

your eprom has damaged man

[kautuvera]

I read the IC have been difficult for friends who can help me? Can I just connect the wires I?

[youssef70]

communication error <<<<< check port used for xprog
and you have to lift some pins....

[kautuvera]

communication error <<<<< check port used for xprog
and you have to lift some pins....


But I read this case with another problem I have IC:bounce:

[vlk69]

Dear friends, i try to repair EZS, have original dump of eeprom. I try everything what is possible with ezs, have find that cpu generate no watchdog for U5021M. So i want to try re-flash program with file uploaded with Mr. PremierD. i hope ill be succesfull!

[elchip]

I read the IC have been difficult for friends who can help me? Can I just connect the wires I?
You must lift all pins which you use for programming , only Vdd+5V and GND you do not lift.
And reading will be 100% success !
Regard's

[vlk69]

Problem solved! Thanks Mr. PremierD!!

[kautuvera]

Hello Friends, I the file with a new device programmer tried Key turn and everything works, but finding fault with a star diagnostic like this show and these components are not identifiable

[vanos batam]

Hi,
I have w203 with key not turning problem, but my customer brought the new eis with green key, as the dealer does not programme for imports, they can only supply the spares. I tried to to programme the eis with the green key, the key started adaptation but did not turn again.
I have AK400, i tried to read esl, managed to read esl, tried to unlock directly without removing, but failed.
it looks like the problem is in esl!
now how to remove it from the stearing column, does any one have instruction?
or do you have any solution for my problem, please help me.
Thanks


Open manual. The esl

[bali motor]

Hello Friends, I the file with a new device programmer tried Key turn and everything works, but finding fault with a star diagnostic like this show and these components are not identifiable

that troble on eis. hardware eis troble, try change new eis. with same file. and you check volt on low and high can on eis.

[vanos batam]

that troble on eis. hardware eis troble, try change new eis. with same file. and you check volt on low and high can on eis.




bos.. komang..! how are u ?
dimana?
baru bangun?
tumben

[bali motor]

bos.. komang..! how are u ?
dimana?
baru bangun?
tumben

yes boss, ini tumben on line.. sibuk, banyak kerjaan di bengkel.

[kautuvera]

Today I premierD 3K91 FULL flash file with this that's set as the test and I see other parts of the fault detector device recognition

[kautuvera]

Today I premierD 3K91 FULL flash file with this that's set as the test and I see other parts of the fault detector device recognition

Please if anyone can help me answer soon

Regard's

[bali motor]

Please if anyone can help me answer soon

Regard's


check your coding on eis.

[kautuvera]

Any chance you more advice?

[cammy25]

ok watched this long enough....

The EZS you have has different sw than like W211. Because your EZS has a built in Gateway function!! W203 dont have a gateway, did you notice? .

whats the original MB nr? and what programmer do you use...I will generate the right Flash for you.

[vanos batam]

Looking for EIS EZS FLASH DUMP for w203.
Ezs Partnumber 209 545 05 08

It must be a dump of w203 or w209

NOT!!! w211....

HC12 3k91d


I can't establishe connection to processor with ROSFAR, so i had to solder it out .
i am using ETL Programmer.. I safes the eeprom part... Flash part is empty.

Tried a Flash dump from w211. Its not 100% working because w211 has extra ?CGW.

W203 has CGW in EIS....

this is ezs 212 and 211

[abdulrauf]

hi all, please am in a serious problem and i need your help. i wanted programming a spare key for e240 w211 2004, and i use ak400 to read the ezs but when it got to 99% the device hanged and i waited several minute the but it fail to complete,finally i have to disconnect the device then reconnect it back,after which i try reading again and it read 100%. but when i wanted generating key with the dump the software gave me error,i tried several times
it still same error. i finaly gave up doing the key and decide to the return ezs back to the car but the key did not turn ignition.
please i need your help costumer is on my neck.fine the files attach

[icogsm]

my dump read with ETL
B.R.

[addgsm]

need complete dump for my c class w203 cdi year 2001
eis has been tempered already so i have anoth used one
eis p/n 209 545 05 08
hc912 ok50e
here
br

[antioqueno]

Hello,

I lost MCU data for c class w203 2004 hc908 Mask Ij35D Part # EZS 203 545 06 08, the car doesn't start and no response when key inserted into EZS.

Please anyone could help me sending EZS dump: eeprom & flash for MCU so i can recover ezs data when generating new bin files from EZS (you provide) and existing ESL/ECU.

Thanks a lot

[bregsm]

sir i have a ezs 203 545 06 08 i lost amcu data 1j35d i have a ak500 plz help me how too this work plz provide a data i recover a eis great thans

[gogoli]

i need for help
i need for full dump w203 2004
eprom+flash+key
nr ezs 2095450508

my original dump I think it is broken

thanks

[icogsm]

2095450508= 912DG128 !!

[gogoli]

yes is MC9S12A128

[craigg1983]

hi there can someone provide me with a flsh for mercedes eis part number 209 545 09 08 it has a 9s12 it's a DT128 MASK I THINK IS LO1M

THANKS