Qashqai DPF and EGR off for ECU EDC 17C42

[goodoane]

Hi I need DPF and EGR Off for my Nissan Qashqai 1.6dCi 2012
HW: 1074R
SW: 1037524453
VIN nr.:
SW ver.: BB58E
Spare:
Engine:
HW Ver.:
SW upg.: BB55D
Installation:
ECU extracted with Kess V.2 clone on OBD
I have this DCT P1453 and P1525 after emptying DPF filter.

L.E.
The DPF filter is on place(is empty now) no sensors removed, do I need EGR Off or it's enough only DPF off. I have read ecu with kess 2.47 from OBD(with kess 2.80 I get checksum error, with kess 2.47 I don't). I was able to remove DCT and DPF with ADV DPF Remover 1.7. Do I need to do checksum or not? Can I write the file back as is with kess 2.47? Thank's.

[DamosTuning]

DPF off should be enough if you don't have any faults on your EGR, as flashing i never recommend clone tools to do the job.
But from what i have seen from other users here and those that use clones KTAG is your safest bet to write the file.

[peugeotexpert]

your file
test and report
pass pm

[goodoane]

your file
test and report
pass pm
File work ok.
Thank you sir

[goodoane]

DPF off should be enough if you don't have any faults on your EGR, as flashing i never recommend clone tools to do the job.
But from what i have seen from other users here and those that use clones KTAG is your safest bet to write the file.
I have read and write back the ECU (EDC17C42) with no problems with Kess v2 EU clone on OBDII port. Lucke me:winky:.