help to repair dflash dump from minicooper FRM Module

[arielcom]

Can please some helpme to repair this dflash dump from minicooper. sorry bad english.

need repair

[Mrpiston]

https://tlvps.tomvanleeuwen.nl/frm/

[arielcom]

https://tlvps.tomvanleeuwen.nl/frm/

I need repair corrupt dum bro. No need dflash to eee. Thanks.

[ricked]

I need repair corrupt dum bro. No need dflash to eee. Thanks.

so, what do you need then? you post dflash but you dont need eee????

[Hayssam1]

Can please some helpme to repair this dflash dump from minicooper. sorry bad english.

need repair

NOTE: Ensure you write to EEE partition and not back to D-Flash!!!!

VIN: WMWSU3C5XBT253590

if you don't know how to do this please watch my video is in Arabic language but it helps a bit
https://youtu.be/PXjGVSkZuk8?t=443

[ricked]

NOTE: Ensure you write to EEE partition and not back to D-Flash!!!!

VIN: WMWSU3C5XBT253590

if you don't know how to do this please watch my video is in Arabic language but it helps a bit
https://youtu.be/PXjGVSkZuk8?t=443




sorry to say but your file is full of junk data, he probably does have the same file

[Hayssam1]

sorry to say but your file is full of junk data, he probably does have the same file

thank you meistro for your information but I do it every time with this program dflash_to_eee and it works

[ricked]

thank you meistro for your information but I do it every time with this program dflash_to_eee and it works

sure it will work i did not say it will not, but life span will be shorter and 8 out of 10 times it needs coding or this and that does not work when mounted in car, i do +100 FRMFA, FRM2 and FRM3 yearly and see lots of errors when using online tool, hexprog, xprog solutions

anyway hope your eee helps for OP

[arielcom]

this is the error bro


Corrupt D-Flash file detected! Results probably incorrect! (Don't use clone programmers)
VIN: WMWSU3C5XBT253590
FA: R56_#0311&K9E1%0851*SU33$1CA$205$210$249$255$2GA$2VB$300$327 $382$450$473$493$4CU$4UF$530$550$563$645$653$655$6 FC$6ND$736$823$845$853$876$8SM$925-B055-EWS4
Production date: 31.05.2011
Programming date: ff.ff.ffff
HW-NR: 3455163 (Hardware part number)
SW-NR: ffffffffffff (Updated part number)
ZB-NR: ffffffffffff (Original part number)
S: 3456588 (Original part number)

[arielcom]

Chip power configuration modified successfully!
Chip power turned on
Writing chip configuration information...
Attempting to set crystal frequency to0x00000000
Set crystal frequency successfully!
Chip configuration all successful!
Querying chip basic information...
Chip connection succeeded!
Chip ID detection in progress...
Chip ID detection succeeded! Chip ID is:2M25J|3M25J(C482)
Chip unsecured
Start writing bufferEEE
Chip data writing failed!Error code：11030001
Ending process
The chip power has been turned off!


I think my problem its the ic bro. i cant write it.

[Hayssam1]

sure it will work i did not say it will not, but life span will be shorter and 8 out of 10 times it needs coding or this and that does not work when mounted in car, i do +100 FRMFA, FRM2 and FRM3 yearly and see lots of errors when using online tool, hexprog, xprog solutions

anyway hope your eee helps for OP

you are right 100% now I know why I always get errors and sometimes I have to do an online update thank you very much for your information you are the best

[ricked]

Chip power configuration modified successfully!
Chip power turned on
Writing chip configuration information...
Attempting to set crystal frequency to0x00000000
Set crystal frequency successfully!
Chip configuration all successful!
Querying chip basic information...
Chip connection succeeded!
Chip ID detection in progress...
Chip ID detection succeeded! Chip ID is:2M25J|3M25J(C482)
Chip unsecured
Start writing bufferEEE
Chip data writing failed!Error code：11030001
Ending process
The chip power has been turned off!


I think my problem its the ic bro. i cant write it.

if i read this and you did partition it correct, your mcu is defect

next time post this info in first post so we dont have to guess what you need...

[arielcom]

Problem solved erasing pflash and eee with multi-prog. then i write this 2 dumps and work. thanks to all helpme. Again sorry bad english