VW TRANSPORTER 2013 ALL KEYS LOST vvdi2 MQB48

[fragga]

please help, I have immo data, but when I try to add key it says ADD Success with VVDI2
but when I turn ignition on, I still see NO KEY message, please help

[rob h]

2013, mqb?

[fragga]

2013, mqb?

Yes , MQB2013 WIth 24C64 Dashboard

[richard27]

In my opinion, that vehicle should be UDS type. 2013 mqb ??
If you have zedfull, I'm sure it has uds, which will take 3 minutes with the probe cable.:dead:

[Maartinj]

2013 - UDS cluster PQ platform
not MQB ...come one
use glass ID48 or xt27 rewritable,
if key is add and cluster still not see key, use VCDS - go to 25th -advanced ID and check curret transponder ID and position 1 and 2 transponder ID and post that info
vvdi2 add key directly to immo
if ing coil is faulty - not recognize any key

[fragga]

2013 - UDS cluster PQ platform
not MQB ...come one
use glass ID48 or xt27 rewritable,
if key is add and cluster still not see key, use VCDS - go to 25th -advanced ID and check curret transponder ID and position 1 and 2 transponder ID and post that info
vvdi2 add key directly to immo
if ing coil is faulty - not recognize any key

VVDI2 detect system as 2013-2019 , Autel detects the same, Glass Chip ID48 is not accepted I tried it, I also tried XT27A it requests XT27B , the problem with the car is they lost the key, no electrical problems, when I check the Working key position with VVDI2,it shows me position 1 exactly where I selected the key when Adding key ,

[Maartinj]

VVDI2 detect system as 2013-2019 , Autel detects the same, Glass Chip ID48 is not accepted I tried it, I also tried XT27A it requests XT27B , the problem with the car is they lost the key, no electrical problems, when I check the Working key position with VVDI2,it shows me position 1 exactly where I selected the key when Adding key ,
no matter how is detect
you should know what to do
VVDI2 detect key position over CHIP ID, but I am not asking for that
if glass ID48 is not possible - you do it wrong
definatelly no need 27B , because this cluster accept typical ID48 precode to Tp23
is soo simple cluster