View Full Version : W210 E290 im*o off
dkw
13th April, 2010, 02:22 PM
Help me with remove im*o on Mercedes E290 - 1996y ,with ECU 0281001494?I use immotool to clean the im*o but dont work.
Please help.
best regards
mercis
14th April, 2010, 05:16 AM
send me dump from ecu
dkw
14th April, 2010, 08:42 AM
This is the dump from ECU
thanks
Amine13
14th April, 2010, 11:12 AM
HI mate where is located this dump in the ecu ??? didn't found 24C02F on it.
Regards.
dkw
14th April, 2010, 11:40 AM
This is at back side of ECU
mercis
14th April, 2010, 11:48 AM
you need star to personalise ecu
dkw
14th April, 2010, 11:58 AM
I have the STARDIAG. What setting i need to do to start the engine ?
dkw
14th April, 2010, 12:02 PM
You use OTOCHECK to do this dump,i make same file but engine still dont start.I dont know what i do in STARDIAG
Any ideas ?
pepi
14th April, 2010, 01:02 PM
With star diag you will need to adapt as the new ECU.
mercis
14th April, 2010, 08:06 PM
coding ecu,write fin
sogaro
16th June, 2010, 02:21 PM
Something is wrong with the clear.bin file its not W210 but W202. use this virgin file instead
الزعبي1
17th June, 2010, 11:23 AM
hi,
I have 211.165 E280 2006 model
the car is not shifting
can not program the gear
can not store the coding for the electronic plate
If you can help
sogaro
17th June, 2010, 05:31 PM
What dtc is on ME, and can you access EGS? What diag tool are you using?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.