netranger69
1st July, 2024, 08:45 PM
Hi all,
1. I removed the old bsi and dumped the 95160
2. I got the code from the dump to use it later when asked in PP2000
2. I virginize the dump and saved it as a new file
3. I loaded the new file to the 95160 of the new bsi
4. I fitted the new BSI on the car
5. Using PP2000 I did the bsi replace procedure: entered the vin number, then programmed the keys (same keys that worked with the old BSI), I then did the BSI configurations (matches the old BSI configurations).
Car starts, everything works fine except the key remote locking/unlocking, I chekced the battery and replaced it with a fresh one...and still the same!
I followed the procedure to program the remote with no success (ignition, within 10 seconds press and hold lock for 10 seconds, turn off ignition and remove key, wait 30 seconds).
Any ideas how to fix this? The car is a 2006 Peugeot 206cc
Many thanks!:devil:
1. I removed the old bsi and dumped the 95160
2. I got the code from the dump to use it later when asked in PP2000
2. I virginize the dump and saved it as a new file
3. I loaded the new file to the 95160 of the new bsi
4. I fitted the new BSI on the car
5. Using PP2000 I did the bsi replace procedure: entered the vin number, then programmed the keys (same keys that worked with the old BSI), I then did the BSI configurations (matches the old BSI configurations).
Car starts, everything works fine except the key remote locking/unlocking, I chekced the battery and replaced it with a fresh one...and still the same!
I followed the procedure to program the remote with no success (ignition, within 10 seconds press and hold lock for 10 seconds, turn off ignition and remove key, wait 30 seconds).
Any ideas how to fix this? The car is a 2006 Peugeot 206cc
Many thanks!:devil: