KIA RIO ME17.9.11 Immo off

[neemo1]

Hello!

I need help for immo off:
KIA RIO 2013y 1.2
39133-2B311
ME17.9.11

Thanks for help!

[ylie86]

try this file

[neemo1]

Not working :(

[ylie86]

dtc set in ecu?

[neemo1]

one dtc:
p1690-60

[Hayssam1]

your file is already made immo off the checksum also OK

I think you have other problems maybe something is missing

[fenir]

Hello.
Try this file

[neemo1]

Don't working "fenir". It cranks but doesn't start.

If immo is disabled, then why is there error p1690 "Hayssam1"?

[Ninjor s]

Don't working "fenir". It cranks but doesn't start.

If immo is disabled, then why is there error p1690 "Hayssam1"?

...........start your car remove smatra or cut ecu pin 80

[lion0304]

It seem 99% hardware failure. What is the problem? No immo light and check engine?

[rafal]

It seem 99% hardware failure. What is the problem? No immo light and check engine?

as usual 60% files off useless - others problems with cars

[neemo1]

Don't working "Ninjor s (https://www.digital-kaos.co.uk/forums/member.php/719848-Ninjor-s)". It cranks but doesn't start.

I have two error: P1676 &1690 - immo problem.

I have 3 ECU and they all have the same problem.

[lion0304]

as usual 60% files off useless - others problems with cars

Yeah, almost when car failed to start, they just think immo off should be the solution.

[neemo1]

I have the timing checked, the crankshaft and crankshaft sensors replaced, and additionally checked on an oscilloscope.
The entire installation has been checked and only the immobilizer error remains.

1034231

[erkor]

I have the timing checked, the crankshaft and crankshaft sensors replaced, and additionally checked on an oscilloscope.
The entire installation has been checked and only the immobilizer error remains.

1034231

Try this a file .........
1034236

Press ONLY thanks for a pass :)

[neemo1]

Same as from "fenir", doesn't work.
Same as from xxx, doesn't work.

[erkor]

Same as from "fenir", doesn't work.
Same as from xxx, doesn't work.


I couldn't compare it with his file because it was password protected.

[erkor]

try ................

1034251

The pass is the same

[neemo1]

No errors because p1690 is disabled from the table but it still doesn't work.Same as from xxx, doesn't work.

[Ninjor s]

No errors because p1690 is disabled from the table but it still doesn't work.Same as from xxx, doesn't work.


working solution if not i assume car problems

[ylie86]

check ground in engine bay

[lion0304]

From the begining, does dash comme with: Immo Light + Engine light or NOT?

If you make immo OFF, the SMartra shuld be disconnected

If NO engine light, ECU bad.

[neemo1]

I uploaded a different software number and the car started. Probably someone uploaded the wrong software to all 3 ECUs.

1034554


Thanks everyone for your help!

[nokwueze]

pls i need immo off kefico ecu 17.9.12 Hyundai ecu pls

[Hayssam1]

pls i need immo off kefico ecu 17.9.12 Hyundai ecu pls

next time please write new topic

try these files and let me know pass PM

disconnect immo box

[nokwueze]

next time please write new topic

try these files and let me know pass PM

disconnect immo box
pls sir
car didnt start

[Ninjor s]

pls sir
car didnt start

..................

[neemo1]

The problem is back, the car drives but does not have full power. Probably the file without imma that I uploaded is from engine 1.2.
I have the ECG510 software version and the algorithms for disabling immo from the forum do not work, and the file I uploaded is ECG410 and the algorithms work on it. Anyone have an idea?

I have the ECG510 software version and the algorithms for disabling immo from the forum do not work, and the file I uploaded is ECG410 and the algorithms work on it. Anyone have an idea?