PDA

View Full Version : c5 prob auto transmission



hamza338
14th April, 2010, 11:12 AM
hi all
i have a prob in citreon c5 xfx 3,0v6 automatic transmission 2000
speed agree but the vehicle is not proceeding at diag no default
so my friend what my came converter or pump failure or lack oiled , i wait your suggestion
if any body have a doc or data ex.pressure oil from this automatic transmission am taker
thanks

autotrans
14th April, 2010, 02:03 PM
what type of transmission, is it a ZF HP20
can you be more precise with the faults.

hamza338
14th April, 2010, 04:56 PM
DO YOU speak in french because i use google translaiter
so my default in fr les vitesse s'engage mais le vehicule n'avance pas {the report passed, the vehicle is not moving]

Ashraf6119
14th April, 2010, 11:06 PM
Hi

Have you checked the Drive Shaft are they OK.

Ash

hamza338
14th April, 2010, 11:19 PM
how to check it

autotrans
15th April, 2010, 10:19 AM
Sorry no french, Drive shaft quick test
check speedo with engine running and in drive with a few RPM

hamza338
16th April, 2010, 11:47 AM
hi all
the input speed of the gear box is less than the engine speed but the output of the gear box is zero position of the selector 'D'

if you have a doc about this gear am interesting
thanks

hamza338
18th April, 2010, 01:39 AM
hi all
now i have this deault code in automatic transmission
p1728 can signal the central control engine torque implausible
po733 monitoring report 3rd failure detected
p0730 erreur inconu
knowing that the engine torque in real data in bva engine running and gear box at position ''P'' -40 nm
if any one have any information about its default am interested

i add the bva doesn't present any damage mechanics ,because i opened
thanks

autotrans
19th April, 2010, 12:02 PM
Turbine speed will normaly lag engine rpm but should
drop to zero in D or R
try unpluging round 16 pin solenoid connector and check
for drive or reverse , if nothing then you will be looking
at a transmiision out job

hamza338
19th April, 2010, 03:12 PM
hi
how to check
for drive or reverse

sorry for my bad english

autotrans
19th April, 2010, 04:40 PM
TRY moving the selector to D or R position with the engine running ????

hamza338
20th April, 2010, 11:17 AM
TRY moving the selector to D or R position with the engine running ????

hi m8
i have tryed this handling and car part but after 4 attempts no movement

autotrans
20th April, 2010, 04:27 PM
sounds like transmission out and major surgery i am afraid