IVECO 2.8 JTD IMMO

[wizz2c]

Hi all can any one immo off this file for me it is iveco 2.8jtd 2002 used all the usual progs with no sucesss ecu is

bosch 0 281 001 537
eprom 24c16

[eliasole]

Try this..

[rabie_m]

dump immo off:beer:

[rabie_m]

is from flash

[lupu_sandu]

On JTD 2.0 , 2,3 , 2.8 immo is in flash 29f400

[wizz2c]

thanks all , i did consider the flash after the 24c didnt work , any one got clear im*o for the flash chip.

thanks.

[lupu_sandu]

Read and post dump from flash. Will be done in a few seconds ;)

[wizz2c]

Read and post dump from flash. Will be done in a few seconds ;)


ok thanks i will post dump in the morning, thanks

[Jose19]

Read and post dump from flash. Will be done in a few seconds ;)

1000% agree, is the best solution ..

Jose

[wizz2c]

here is dump from 29f400bt many thanks

[lupu_sandu]

How do you read this? I have error every time i try to open your file. Even galletto don't see this OK.

[wizz2c]

How do you read this? I have error every time i try to open your file. Even galletto don't see this OK.


Read with dataman pro took many atempts to read. maybe file corrupt on chip

[wizz2c]

ok had a look on file seems to much blank space i may have corrupted file. does anyone have a file for this ecu , many thanks

[Tuning Runner]

decoding for total (immo off) you must read eobd2-cock or other interface on 29f400 flash files,
HEXWORKS change in some areas, then calculate the checksum and write files,
will light in rare cases, the key indicator, but it works perfectly half

[Tuning Runner]

decoding for total (im*o off) you must read eobd2-cock or other interface on 29f400 flash files,
HEXWORKS change in some areas, then calculate the checksum and write files,
will light in rare cases, the key indicator, but it works perfectly half
this example decode for fiat ducato jtd euro3

[wizz2c]

not sure what you mean sorry

[Tuning Runner]

not sure what you mean sorry


this is manual for decoding FIAT GROUP euro3
is necessary read ori file 29f400 for modification im*o OFF

[wizz2c]

this is manual for decoding FIAT GROUP euro3
is necessary read ori file 29f400 for modification im*o OFF


thanks but i think i have corrupted my ori dump

[wizz2c]

can someone check my file for corruption please, i dont have a another file to compare with, getting quite desperate now.i really need to get this out i'm looking like a right plonker. please help.

[lupu_sandu]

This file is from 2.3 JTD readed with wellon VP480.
To compare your file

[Tuning Runner]

can someone check my file for corruption please, i dont have a another file to compare with, getting quite desperate now.i really need to get this out i'm looking like a right plonker. please help.

you daily is: 35 e13 c12 c13 ??
i have this ori file:
IVECO DAILY 2800 35 E 13 Bosch MS6.x 0281001537 35A / AE90

IVECO JTD 2800 35 E 13 Bosch MS6.x 0281001537 F4F6 / 5EFB

IVECO DAILY 2800 40 C 13 Bosch MS6.x 0281001537 2F5 / 580F

IVECO DAILY 2800 90HP Bosch MS6.x 0281001537 - 9DC5 / 19CD

FIAT DUCATO 2800 JTD Bosch MS6.x 0281001537 14D / E7D7

FIAT DUCATO 2800 JTD Bosch MS6.x 0281001537 511F / F9D

IVECO DAILY 29 L 10 2300 HPI Bosch MS6.x 0281001537 A7DC / 1A75

IVECO DAILY 35 C 12 2300 HPI Bosch MS6.x 0281001537 B24C / D311

IVECO DAILY 35 C 13 2800 Bosch MS6.x 0281001537 F7C2 / 38F1

IVECO DAILY 35 C 13 2800 Bosch MS6.x 0281001537 C94 / E05C

IVECO DAILY 35 E 13 2800 Bosch MS6.x 0281001537 8AC / 61BE

[wizz2c]

the details i have are

IVECO DAILY 35
TYPE 29L9
ENGINE 8140.43R
POWER OUPUT 66.1 KW

many thanks

[Tuning Runner]

the details i have are

IVECO DAILY 35
TYPE 29L9
ENGINE 8140.43R
POWER OUPUT 66.1 KW

many thanks

ori file daily

[wizz2c]

ori file daily

many thanks upon checking the file with the files you sent it seems all is ok with my ori .could you make im*o off on this please.hope you can help

thank you

[Tuning Runner]

many thanks upon checking the file with the files you sent it seems all is ok with my ori .could you make im*o off on this please.hope you can help

thank you

you must perform the tests.
Place files in the original flash
24c16 then programmed with this file that I enclose.

[wizz2c]

? necessario effettuare delle prove.
Inserite files ori dentro la flash,
poi programmate 24c16 con questo file che allego.

could you explain in english please

[wizz2c]

you must perform the tests.
Place files in the original flash
24c16 then programmed with this file that I enclose.


sorry what file do i need to program to flash?

[Tuning Runner]

sorry what file do i need to program to flash?

yes.....programm flash + 24c16

[wizz2c]

yes.....programm flash + 24c16


yes i understand that but which file do i program to the flash?

[wizz2c]

ok all done, the 24c16 was all i needed to program after all NOT the flash i just left that as it was. i used the file that 'Tuning Runner' kindly supplied for the 24c.many thanks.

[lupu_sandu]

WTF? This is IVECO. I'm stupid m8.
I was thinking at Fiat JTD. Very silly.
Indeed on Iveco EDC15 only eeprom is need reprogram.
Sry for mistake m8.

[maaxxyy]

Hi WIZZ2C, did the file from Tunning Runner give immo off or did you have to program keys after? Thanks

[lupu_sandu]

For Iveco EDC15 solution is immo OFF totally. No need key after

[milkatrek]

in iveco 2.8td u must change only 24c16 eeprom :)

[maaxxyy]

Thanks guys for comfirming this immo solution.:proud:

[maaxxyy]

Just to confere, is the 24c16 eprom on the back of the baorad/ecu or do you have split it? remove board from casing? Thanks

[bo0st]

hi boys!
have bosch MS6.3 0281 001 892 on the desk from Renault Mascott 2003. is the same as in IVECO. where to find EEPROM pls?

thanks

EDIT: OMG im blind :D ...all ok

[teerak2uk]

Hi guys

i also have a fiat ducato 2.3 JTD (i think) 2003 with immo problem i asked the customer to supply the immo code from the dealer and they gave him 75128 but my SBB says wrong pin code so looking at prob immo off can anyone tell me what flash/eeprom chips i need to read i have xprog-m or galleto

Numbers from the ecu:

BOSCH
0 281 010 488

1329236080
D23 42wmw

any help is much appreciated

many thanks

[turner]

Hi Guys

I have one of these to do for the emergency services, So there is a bit of a hurry, not sure which chip it is so if anyone can help I would really appreciate it

Thanks

[mariooo]

Hello everyone, I have the original file
DAILY 2.8 TD 0281001537 EDC MS 6.3
the file is contained in 24c16
eprom reprogram just this, with the original file iveco 24c16

[turner]

Does anyone know where the 24c16 is located, can someone show on the pictures I uploaded earlier in the thread?

Many Thanks

[bricolo]

Does anyone know where the 24c16 is located, can someone show on the pictures I uploaded earlier in the thread?

Many Thanks
Hi
read what is write on this eeprom

[turner]

Could someone please immo-off this file please?

Many Thanks

[lupu_sandu]

Could someone please immo-off this file please?
Many Thanks
Your file off:

[furburger]

I have used off files in these iveco's & they work well.. v-max remains in place though so i think limit switch/value is in flash. Anyone know which bytes do this ?

[gokey]

someone help immooff
iveco 0281001537

[neriuks007]

try and report ,disconect immo before,pass pm,

[gokey]

password in pm ??

[gokey]

password not work

[furburger]

There is no need to disconnect immo box on this van with this ecu.. Just load in the OFF dump and it will start ok..

[Serg1o]

Help to calculate the checksum. Fiat Ducato 2.8 JTD 0 281 011 054. I have already deleted Immo.

[jruibarroso]

please help me to immo off IVECO 2.8 ,
file was read by OBD with Galleto
hope this is ok

BOSCH 0 281 001 537

thanks