2001 BMW e39 mileage correction help needed

[simplextibi]

Hi guys
I need to change mileage in a 2001 e39 bmw
i use pa soft and read out the eeprom from ike,ews and lcm
what address can i reset the change counter and the mileage to something else:

thank you

[episcop]

Car type: BMW 5xx - M35080 - 2001-2002 years
The mileage is also stored in EWS and LCM modules!
It is better to replace the M35080 chip with new one,
as erasing can cause problems in 50% cases
The mileage is stored in the next lines:
0000: 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C
0010: 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C 01 5C
where the next bytes:
01 5C - is a mileage

Car type: BMW EWS3 MODULE SW ?? - 68HC11EA9 - 1997-2006 years
This module stores the copy of mileage in E39, E38, E46 and E53
The mileage is stored in the next lines:
0120: xx xx xx xx xx xx xx xx xx 40 E2 01 xx xx xx xx
01E0: xx xx xx xx xx xx xx xx 40 E2 01 xx xx xx xx xx
where the next bytes:
40 E2 01 - is a mileage

LCM - type?

[simplextibi]

it is not there the ike is hw16 sw 14

[vares]

HW16 SW14 has m35080 inside,Pasoft can`t do this dash.

[simplextibi]

what is the solution? which software?

[vares]

You needs tool/programmer for m35080.

[cool2503]

i have a 520i (e39) with vdo dashboard hw16 sw 10 i try to read and modify 93246 but i don't find software to calculate exactely .i put 90000 km an after a few km the mileage is back before i change.what chi need to read.
an i read .write 93s46 as a 93c46 because may prog dosen't have this chip

[marinero123]

i have a 520i (e39) with vdo dashboard hw16 sw 10 i try to read and modify 93246 but i don't find software to calculate exactely .i put 90000 km an after a few km the mileage is back before i change.what chi need to read.
an i read .write 93s46 as a 93c46 because may prog dosen't have this chip

It's hard to do this work/job without proper tools.
You may lost original data and then :banghead:.
93s46 is not = 93c46 ..

[leboncoindu94]

salut les gas moi j'ai un 530d de 2002 esque c'est bien une eeprom 35080

[diga1]

i have a problem vith bmw e39 y2003 after programing ike ews lcm, the funcions on stering vheel dont vork(tempomat,car stereo functions) is it possible thath this happened becouse of milage correction?

[Auto Relja]

x prog m original works without problems.