PDA

View Full Version : GOLF 2009 AUTOMATIC ISSUE WITH AUTO SELECTOR


super jumbe
27th July, 2024, 08:53 PM
Lads I have VW Golf 2009 automatic, I cannot move gear selector from Park to D and cannot start this car, I was told if I replace Shifter Micro Switch I would able to solve this issue, so far I can only see Micro Switch 5Q0713128A this for sale golf from 2017 on line, I need to know will this part fit Golf 2009? Or can someone advice me will accept any advise.

https://i.ebayimg.com/images/g/ZFAAAOSw~VRkSe3N/s-l960.webp
fuzz1
28th July, 2024, 01:28 AM
Hi
I'm guessing you scanned the car and the code pointed to the gear shifter being faulty. If the problem is the switch just bypass it to see if at least it solves your problem before buying anything.
super jumbe
28th July, 2024, 09:20 AM
Hi
I'm guessing you scanned the car and the code pointed to the gear shifter being faulty. If the problem is the switch just bypass it to see if at least it solves your problem before buying anything.

Can you please give me wiring instuction how to bypass will be greatly help thanks.
rui
28th July, 2024, 09:38 AM
Hello friend.
This is only for 2017 Golfs and there are 2 types of levers (brands).
In your car, try to see what faults you have related to the lever and the ODIS, follow the fault.
fuzz1
29th July, 2024, 02:46 AM
Hi
Unfortunately i don't have the wiring diagram. I think without opening the shifter you can't bypass the switch. Or at least i don't know how to do it without opening the shifter
super jumbe
29th July, 2024, 10:27 AM
Hi
Unfortunately i don't have the wiring diagram. I think without opening the shifter you can't bypass the switch. Or at least i don't know how to do it without opening the shifter

Yes after taking top lever cover I pressed the yellow button and managed to release gear liver but car still will not start, although I can start car with direct wire to starter motor, the brake light switch looks ok because the brake lights coming on, looks like will have to find someone with odis.
pawl
29th July, 2024, 09:07 PM
if I understood correctly it doesn't work for you Y163 Electromagnetic switch for travel range switch
Is there a brake press icon on the indicator?
rui
29th July, 2024, 11:02 PM
Do you happen to have the fault codes for the car you registered?


You can read from the value block whether the brake switch is working properly.


These levers don't tend to fail very often.
fuzz1
31st July, 2024, 11:14 AM
Just use any scanner for the codes. It might be the gear shifter assembly that is faulty. Or some bad connections. But yes you need to check what happens when you press the brake pedal. I think there is an indicator on the dashboard for that or just use live data you will know whether the switch is good or not.