lost channels on THE BOX

[hkhan]

I have starview the box and i have lost mostly nearly all the channels. i am receiving all the basic channels such as bbc bbc 2 itv 1. but lost every other channel. i have rescanned several times but still wont get anything. is there any way or hope?

[sharonl]

i am having trouble getting my epg to work any help appreciated s

[hkhan]

how do u check if ur epg is working

[jckw]

wot area u in

[cactikid]

try a factory reset first 0000 to delete,autoscan your provider
and keycode enable or emu to on.

[hkhan]

how do i go on to the emu setting?

[boomer39]

try a factory reset first 0000 to delete,autoscan your provider
and keycode enable or emu to on.
going for a pint!!!!!!!!!!!!!!!!!!!!!!!!! want to join me...????

[cactikid]

menu1570 that gets you in there.

[oscarwilduk]

I have starview the box and i have lost mostly nearly all the channels. i am receiving all the basic channels such as bbc bbc 2 itv 1. but lost every other channel. i have rescanned several times but still wont get anything. I reset to factory settings and rescanned all channelds back with $ singn, Each time i select any of the channels it comes up with Bad or channel scrambeled any help please!!!!

[ManofScience]

what area?

[foggy18]

hi guys dont know if you can help have got one s v 5 that is working ok ,just picked up another sv 5 and put the same firmware on as first box from memory stick on a cleen line with no splitters ,it keeps coming up no channels found ,when i plug the other box in it is still working ,dont want to rescan this box in case we loose channels on this one aswell firmware used is the box super usb 2 v2.03,20090923,bin have downloaded new fiemware and still got the same problem ,i live in kettering northamptonshire,
or have we been hit with nag 3 ,
thanks in advance if you can help
foggy

[BTPhil]

Hi Chaps
Its that damn Nagra3 encryption that VM have rolled out everywhere, it seems like it could be the end unless it can be cracked.

BTPhil

[foggy18]

hi btphill
do you think they have got us hear in kettering
foggy

[oscarwilduk]

I am in london area

[cactikid]

hi guys dont know if you can help have got one s v 5 that is working ok ,just picked up another sv 5 and put the same firmware on as first box from memory stick on a cleen line with no splitters ,it keeps coming up no channels found ,when i plug the other box in it is still working ,dont want to rescan this box in case we loose channels on this one aswell firmware used is the box super usb 2 v2.03,20090923,bin have downloaded new fiemware and still got the same problem ,i live in kettering northamptonshire,
or have we been hit with nag 3 ,
thanks in advance if you can help
foggy

try a factory reset 0000 to delete,and auto scan providers again,try different providers also make sure coaxial is plugged into correct socket

[djc_1978]

Hi,

I'm having the similar sort of problems as above, however still get some channels (incl movies) I've tried everything suggested except downloading the software update 1.12, do you think this will rectify the problem or am i wasting my time due to Nag3?

Thanks in advance (I'm in Liverpool by the way)

[boomer39]

Hi Chaps
Its that damn Nagra3 encryption that VM have rolled out everywhere, it seems like it could be the end unless it can be cracked.

BTPhil
where is everywhere?? ie. where are YOU????????????

[cactikid]

i am sitting in my chair answering questions lol

[sensahuma]

try a factory reset 0000 to delete,and auto scan providers again,try different providers also make sure coaxial is plugged into correct socket
Hi, i had a similar issue where i lost 2-3 channels, got tempted to reset and reload firmware and in the process losing everything. On advice frm "Larryoke" I did autoscan with other providers and it worked with "OM". I had done it last time with NTL few mnts back. Why does changing a provider helpl even though the i/p signal is frm VM, i.e. NTL??

[cactikid]

frequency of channels changes and some areas have changed
providers,so if you dont find channels on one provider try another.

[boomer39]

Hi, i had a similar issue where i lost 2-3 channels, got tempted to reset and reload firmware and in the process losing everything. On advice frm "Larryoke" I did autoscan with other providers and it worked with "OM". I had done it last time with NTL few mnts back. Why does changing a provider helpl even though the i/p signal is frm VM, i.e. NTL??
i am in an ex ntl area, now vermin but cant get anything scnning with ntl, have to use t/pest or xc/w...

[shaunali]

Hi, i had a similar issue where i lost 2-3 channels, got tempted to reset and reload firmware and in the process losing everything. On advice frm "Larryoke" I did autoscan with other providers and it worked with "OM". I had done it last time with NTL few mnts back. Why does changing a provider helpl even though the i/p signal is frm VM, i.e. NTL??
You will probably find that you were not a pure N*L area.

[politicallycorrect]

I found that if I downgraded my SV4 to firmware 1.07 and then re-flashed with 1.12, it ran a lot smoother and allowed me to scan faster... might be me tho, first time with a starview.

[andybog]

i lost all channel on the box over the weekend. Im in preston, lancs area which as far as i kno doesnt have the new cards yet so aint n3 is i write this. I just factory reset my box and did a MANUAL scan, put in the lowest frequency i know they transmit on ie 103,000 and set network scan or provider scan, i forget what i say exactly, to ENABLE and hey presto(n)!