a4 8K 2009 component protection gateway

[AE Simic 026]

I have an Audi A4 2009 2.0tdi. The car did not start after an accident. The BCM in the rear of the vehicle was damaged and the previous owner threw the original BCM in the bin. Now we have started the vehicle,the main computer ECU is pairedthe lower lock and the key,the vehicle now starts and the engine is running. My problem seems to be in the 19gateway module because there is a CP in it and of course the dashboard is locked radio, the airbag module also has a CP. I tried with odis online but it told me that there is an error in the dashboard and gateway,both modules have been replaced but the online connection does not go through.
Can anyone help me and have any of you had a similar problem

Thank you

[kuebk]

Why did you replace the cluster and gateway?

[AE Simic 026]

Why did you replace the cluster and gateway?
When I worked with odis online it threw an error and the support told me to replace those two modules. That's why I changed them

[kuebk]

- put back original CAN gateway and cluster
- attach CAN gateway eeprom
- attach BCM2 dump

[AE Simic 026]

I returned the original CAN gateway and read the BCM

[AE Simic 026]

- put back original CAN gateway and cluster
- attach CAN gateway eeprom
- attach BCM2 dump

I returned the CAN gateway and dashboard original

[AE Simic 026]

- put back original CAN gateway and cluster
- attach CAN gateway eeprom
- attach BCM2 dump

added by p-flash
1043973

[kuebk]

Write this EEP to BCM2 and report back.

[AE Simic 026]

Write this EEP to BCM2 and report back.

pass please

[AE Simic 026]

Write this EEP to BCM2 and report back.


good job my friend.it works

thanks

[AE Simic 026]

read the air condition module eeprom

1044053