PDA

View Full Version : Freightliner, improvement of HP with DDDL



lituzz
19th April, 2010, 11:16 PM
Does anyone knows how to improve the hp of a freightliner truck with DDDL?

kampowar
21st April, 2010, 10:10 AM
hi all you can do with dddl is change inj codes to 75 and there is option to change hp from 430 to 470 or 515 and its under rating enjoy

lituzz
22nd April, 2010, 01:09 AM
where can I change that please? I suppose that is when I retrieve calibration data but in wich topic can I change that? Thank you

hercamp
22nd April, 2010, 06:19 PM
yes you change rating from DDDL ....first you need go to retrieve calibration and select rating option....if the ecm calibration has unlock the rating change option or habilited...you can change it ...change the rating you need and enter rating password....thats could be 0000 or use the editplus option.

lituzz
23rd April, 2010, 01:29 AM
Thanks @hercamp There is only one matter, I retrieve calibration, then when I go to menu calibration, the option rating is disabled. Is this an instalation problem? I've DDDL6.4. and I installed it through the web page of the installer provided here. Is there a setup.exe for DDDL7 in case that is an installation problem? THANKS!!!

By the way, I found the part where I've to input the injector codes, Its all blank and I've to input a number like: 1-234-567-89-01234

The freightliner has an engine with the following characteristics: mercedes benz MBE900-280 6. 4L280HP@2300RPM.
It has 6Cyl.

Thanks for your help!

hercamp
23rd April, 2010, 03:41 AM
well you most install ddrs 6.x and there u have Mercedes B....reprograming sistem ..from there you can do all changes to ecm....

lituzz
24th April, 2010, 06:54 PM
Thanks hercamp, I installed it but I didnt found any crack, so I try to run it this way and it says "Hardware key not found". I cant open it.

Thanks for your comments!

hercamp
24th April, 2010, 07:46 PM
you have to crack the ddrs

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/194009994/DRSSec.rar)

its works 100% enjoy

lituzz
26th April, 2010, 12:42 AM
Thanks for your help hercamp, I went to C:/PF/Detroit diesel/ DDECreprograming system. then I deleted the old file "DRSSEC.dll" and pasted the new one. then restarted then I tried to open Mercedes benz reprograming and keeps showing the same thing. I even run the dll file with REGSVR32.exe. But no luck. I looked at the version of DDRS soft and is 6.14 not 6.10 Would this be wrong?

hercamp
26th April, 2010, 01:31 AM
do not open ?
can you share a picture of error?
if software open !!! you are connect to ecm?because the software cannot be open without connection to ecm

lituzz
26th April, 2010, 06:55 AM
Well wether the software is online with ECM or not it shows same mistake. Here are the pics. Thanks for your help hercamp

ddec3
26th April, 2010, 07:22 AM
you need ddrs to change hp rating

lituzz
26th April, 2010, 05:29 PM
well try something....

when you go to C:programsflders/detroitdiesel/reprograming sistem

do not cut the file just replace try to pick up and put over file that you have to replace ...wait for message of replace....the other problem can be the crack

http://rapidshare.com/files/380397172/DRS_USB_CRACK.rar.html (http://rapidshare.com/files/380397172/DRS_USB_CRACK.rar.html)

pass detroitdieselman


N1!!!! I guess that was the problem. I downloaded this file and replaced without deleting the older file. Then I opened it and I could connect to ECM Thank you so much!. Just 1 last question, I attached an image to this message It shows this error and dont let me see the tool menu. And by other side, The only option I see is to update the VCU version(From 14.19 to 14.26a) because the rating option is disabled. Do you know if updating VCU software The Hp would increase? or do you maybe know where to change that? Im sorry all this questions. Thanks for your attention.

Matrans
29th April, 2010, 10:01 AM
hi all you can do with dddl is change inj codes to 75 and there is option to change hp from 430 to 470 or 515 and its under rating enjoy
Do you no what extra HP injector code 75 does. I have a 14LTR Detroit @575 HP i put code 42 in all injectors and it goes around 620 cummins but Turbo gets very hot what does 75 do?

stumpnc
10th January, 2011, 11:45 PM
Do you no what extra HP injector code 75 does. I have a 14LTR Detroit @575 HP i put code 42 in all injectors and it goes around 620 cummins but Turbo gets very hot what does 75 do?

The code 75 is supposed give a slightly richer mix at idle.This will supposed to help off idle performance. If you have high exhaust temps check exhaust system. Stock mufflers are very restrictive. If you are running stack mufflers Donaldson M100463 is a free flowing muffler and will lower your temps quite a bit.It is also the one Pittsburg Power sells as their performance muffler.

acid325
18th January, 2011, 02:29 PM
but 75 is not good for ddec engine egr 14L an egr engine need to programm injector to 50

talmadge
22nd January, 2011, 02:10 AM
the inj cal is just for idle, it makes quicker off idle but its not used after that.

Dieselhawk
7th March, 2011, 01:48 PM
the inj cal is just for idle, it makes quicker off idle but its not used after that.

This is the official DDC response but I can tell you from dynoing hundreds of non-egr S60s that the injector cal code can increase hp significantly.

ddmech
24th March, 2011, 02:10 AM
DDC isfull of it.Ive done the same thing and noticed large jumps in horsepower.75s will work in egr motors also.Tried and true.