VW POLO 6C0 959 655 A STILL HAVE PROBLEM

[Panathaole]

Hi again....

after a repair dump from a member here (i had B2000 internal cks error) this srs ecu is not working correctly..... it is definitely sw problem because i got and second one, exactly same numbers and works the same....

now i have two dtcs,

1054357


9445397

9446677




and i can't delete them..... vcds gives me that it cant delete it.... weird......

1054358

[rafal]

test.......................

[Panathaole]

test.......................

thanks mate.... i had already test this solution.... in my case is not working.......

i think the eeprom is corrupted.......... i get a clear and repaired dump from a company, with ori ecu i have no ecu info and a dozen of dcts after turn off and back on the ignition....(i think ori ecu is faulty... of flash corrupted...)



but in my second same numbers srs ecu the same dump gives me only component security..... that's normal???? the coding is in flash???????

[fuzz1]

Hi

You will get dozens of faults yes but it might be that they can all be cleared. Turn ignition on and off several times clear do it again. That's how one I tried behaved till in the end all got cleared. (Not a joke)

[Panathaole]

Hi

You will get dozens of faults yes but it might be that they can all be cleared. Turn ignition on and off several times clear do it again. That's how one I tried behaved till in the end all got cleared. (Not a joke)

with all that dumps (and it a lot...) that i had test, not possible to clear dtcs......(with both ecus that i have...)


1054545

always get this....