malczykos
23rd April, 2010, 09:31 AM
Hello.
Yesterday I programmed the key to the 407th peugeot I programmed the transponder in a new key . im*obilizer works old and new key . Unfortunately, the remote does not work in a new key . I tried to sync a new key, but it does not work.
What equipment do I program the remote? I need a Peugeot Planet? I programmed the im*obilizer with the MVP.
The transponder in the key is PCF7941. Key such as the image. Brand new.
I tried to sync the remote control:
1) switch ingnition on
2) press the locking button for 5 seconds
But I have not tried this method I found on this forum. Maybe I should try this method?
Synchronise the high frequency remote controls.
procedure :
1) Switch off the ignition.
2) wait one minute without pressing the buttons of any remote control.
3) insert a key in the steering lock, turn it to ignition positive (ING+).
4) within ten seconds press the locking button for 10 seconds.
5) switch off the ignition and take out the key.
6) repeat the procedure with the other keys from point Number 3, otherwise move on to point number 7.
7) wait 30 seconds, the remote controls are active.
I really thank you for your help.
http://cdn2.ioffer.com/img/item/139/316/141/59vI.jpg
Yesterday I programmed the key to the 407th peugeot I programmed the transponder in a new key . im*obilizer works old and new key . Unfortunately, the remote does not work in a new key . I tried to sync a new key, but it does not work.
What equipment do I program the remote? I need a Peugeot Planet? I programmed the im*obilizer with the MVP.
The transponder in the key is PCF7941. Key such as the image. Brand new.
I tried to sync the remote control:
1) switch ingnition on
2) press the locking button for 5 seconds
But I have not tried this method I found on this forum. Maybe I should try this method?
Synchronise the high frequency remote controls.
procedure :
1) Switch off the ignition.
2) wait one minute without pressing the buttons of any remote control.
3) insert a key in the steering lock, turn it to ignition positive (ING+).
4) within ten seconds press the locking button for 10 seconds.
5) switch off the ignition and take out the key.
6) repeat the procedure with the other keys from point Number 3, otherwise move on to point number 7.
7) wait 30 seconds, the remote controls are active.
I really thank you for your help.
http://cdn2.ioffer.com/img/item/139/316/141/59vI.jpg