renault Kangoo 1.9 lucas i*mo

[tomaszcz]

Hi alll Friends. Renault Kangoo 1.9 Lucas DCU3R pomp delphi .Can you help me? I *mo killer and cartool does not work. Has anyone on this idea?

[rabie_m]

dump immo off Cut pin 20 immo line ECU

:wink:

[tomaszcz]

Write your dump and does not work. I try WP pin to gnd and does not work.Probably needs to be emu.
Does someone have an idea?

[hamza338]

you want to say the pin wp was holdup and joined to gnd

[tomaszcz]

Started only once after changing to off file dump.Second time will not start.I try WP pin to GND and does not work.

[tomaszcz]

I think I need to replace the chip because it has no write protect

[hamza338]

remove eeprom it will start

[tomaszcz]

Take a look on monday .Thank you Mate.

[rabie_m]

YOUR EPROM 25080 OR 95080

[yasser]

what year is that car?

[fokker2003]

If ECU is a Lucas DCU3R finished in 29C without memory doesn?t start.
No problem in inmo or ecu, problem of this cars is UCH.
If you insert your key and red led flashes very fast, the problem is that your key and UCH changes status and is different between two. You must put in same status and car start without problem.

[tomaszcz]

Car year 2000

[RTVM]

hi,
please open the key and check the transponder coil , also resolder the smd chip inside.Problem is very often the key!!

[Babanovski]

i have done many dcu3r ecu only remove eeprom from board and car starts.

[tomaszcz]

No memory works, but limited engine rpm.

[vellside]

i v the seem probleme

[lynx2us]

I don't know if anyone knows a better way but i use a by-pass module on these.


If you have the 4 digit pin code then the module can be programmed then soldered into the loom to the engine Ecu.

I buy modules from Avon Diagnostics but have my own programmer, pin code generator is on here somewhere, used these for 4 years or so with no problems.

The ecu is to the right of the dash on Kangoo you will need to remove the instrusment cluster etc 1st.

[jimthejock]

why do you need to bypass the immo on this it is much easier to make the key from the data in the immo box and start the car with the immo system still intact

[Meat-Head]

why do you need to bypass the immo on this it is much easier to make the key from the data in the immo box and start the car with the immo system still intact

Because the customer is one of three types.

1) A painter/decorator, who is'nt itelligent enough to understand 'immboliser'

2) A builder who is more than likly going to accidently cement his key into a wall.

3) Some polish guy who not only doesn't understand english
doesn't want to pay anything and looks like this

http://www.guitarmasterclass.net/guitar_forum/uploads/monthly_03_2010/post-5482-1267734279.jpg

[tomaszcz]

My problem solved. need to save memory Write Protect

[DILIAN_1]

how to solve the problem kangoo i * mo

[metsat]

write protect to 95080 and o.k.

[dieselequipos]

No memory works, but limited engine rpm.
please any have service manual of kangoo 1.9

2001 to 2006 or 2007

thanks

[nicamarcos]

No memory works, but limited engine rpm.

Also forget if car have Electric power steering and A-C :), taking eeprom is s***t job and for "quack" customers.

[elecautocr]

My problem solved. need to save memory Write Protect


and Which immo-off file did you use ? Do you mean Write/protect activate ??

Regards

[tomaszcz]

and Which immo-off file did you use ? Do you mean Write/protect activate ??

Regards

http://www.digital-kaos.co.uk/forums/f178/renault-kangoo-immo-off-61182/index2.html

[sosmecano]

just remove your chip 24C

[trycktill]

If ECU is a Lucas DCU3R finished in 29C without memory doesn?t start.
No problem in inmo or ecu, problem of this cars is UCH.
If you insert your key and red led flashes very fast, the problem is that your key and UCH changes status and is different between two. You must put in same status and car start without problem.
hello sir plz can u explain how to put the key nd uch in the same status i have this problem for meagne year 99 i remove 25080 without success engine not start and red led bilnking fast

[krimo06]

hello for all
juste remove ship and it will be ok or get emulator to get good acceleration
but it too beter to add key it's so easy

[ciptel07]

hello, try with this is make with ecuvonix.
but if dont start try to make a new key I help you with apv code from uch memory is 93c66

[ovitanov]

I do it with emulator, 100% work

[maaxxyy]

works 100%, use immokiller, write protect file, and leave key reader disconnected. Tested solution

[sosmecano]

swap pin 7 and car star

[kenancatli]

hello
eeprom 25080
renault kango 1.9D immo off
I'm do immo off with Car tool software well done or not?

help please
Best Regards

[Maxpower50]

206084Hello Need help Renault 1,9 LUCAS DCU3R

Some say remowe CHip which chip remowe 25080 ore others Will the car starts after remove the 25080 ? ore eny sulutione prosedure use a emulator on it

My some can help me out for a fast solution here