Ford SID 206 identification calibration

[Fec001]

Hi!
Can someone help me please to identificate if this ECU calibration number is correct for this VIN:
Calibration: 7G91-12K532-UG
VIN:WF0SXXGBWS7M65327

If I'm correct this is the 140PS/103kW version right?

[carmageddon]

its a SID206

[Fec001]

I know this is SID206. I would like to know if this SW is correct for the VIN.

[carmageddon]

https://i.postimg.cc/K4pxwmK8/IMG-2995.jpg (https://postimg.cc/K4pxwmK8)


https://i.postimg.cc/CR3KtSQq/IMG-2996.jpg (https://postimg.cc/CR3KtSQq)

ford system not tell you this information, you can only connect IDS or FDRS and check if some new calibration are present, i this moment you have the info you need

[Fec001]

Understood, thanks for your efforts!!!!

[Fec001]

I have DTC: U2101:00-2F in ECU, with "Engine malfunction" error on dash with no power. Car came to me like this. I tried very similar calibration file (HW 8G91-12A650-HH SW 8G91-12K532-BH FRBE0C1000000) but error is the same. Possible to make this DTC completely off?

[carmageddon]

is a commo problem on a dash for kuga, smax, focus and orher…need unmount dash, desolder/clean/resolder the plug and all back to work…i did about 50 cars with this problem

[Fec001]

It's Galaxy with this type Instruments. I tought this type doesn't have this common problem.

[carmageddon]

i did also this dash, as i wrote

[Fec001]

Ok, I will try then.