Write EEPROM K-line Honda CBR 1000 RR 2009

[pumukyrr]

Hi guys.


I have a problem with an ECU on a Honda CBR 1000 RR 2009, Keihin model 38770.mfl-761.


I used the Honda ECU software, versions 3.3.3 and 3.5.5.2. using a K-Line cable.


I read the Eeprom and saved the file. When I write the file again or format the Eprom, it gives a message indicating Write interrupted, and the eeprom is not written in its entirety, specifically it does not write anything from offset 383, which is exactly everything related to the immobilizer. The bike stops starting when the file is written.


However, if I program the Eeprom 93a66 with an external programmer such as MiniProg with the same file read and which I use in the Honda ECU, it writes the entire eeprom and the bike starts perfectly.


What software can I use to write the complete eeprom using k-line successfully.


I have contacted MCUInnovatios to ask them but they never respond.


Thanks

[Locksmith Hungary]

There is no software that can do it.
"complete eeprom" forget it. Immo area rewrite cannot be implemented by K-Line...

B/R, LH.

[pumukyrr]

Thank you for your reply.


Is this part of the eeprom protected via kline?

[pumukyrr]

There is no software that can do it.
"complete eeprom" forget it. Immo area rewrite cannot be implemented by K-Line...

B/R, LH.

Thank you for your reply.


Is this part of the eeprom protected via kline?

[Locksmith Hungary]

Yes, write-protected and cannot be reprogrammed by K-Line.