View Full Version : mondeo airbag crash 7s7t 14b056 ac
stippi2006
26th April, 2010, 09:07 AM
Hi
please help with crash reset for airbag mondeo
Bosch 0285010157 eprom 95160
7S7T 14B056 AC 670003481701
juozas10
26th April, 2010, 09:46 AM
Hi
please help with crash reset for airbag mondeo
Bosch 0285010157 eprom 95160
7S7T 14B056 AC 670003481701
Hi.
Try this two dumps...please report...
Dump not tested.
Password is in your PM.
Best regards.:wink:
stippi2006
26th April, 2010, 10:15 AM
The first file was ok after i erased the errors.Thanks
juozas10
26th April, 2010, 10:23 AM
The first file was ok after i erased the errors.Thanks
Thanks for your reply.
Best regards.:top:
eng_mike
27th April, 2010, 12:21 AM
Hi,
I need to repair this dump
I have repaired the dump, I put the unit on car, I clear all errors, and all goes Ok, but when turn off and on again the car, the airbag light turns on again, and in the diag shows A 1 A 3 7
....
Anyone knows how to solve?
I post the foto of the unit, the bad dump and the dump repaired by me.
Br
Mike
juozas10
27th April, 2010, 08:20 AM
Hi,
I need to repair this dump
I have repaired the dump, I put the unit on car, I clear all errors, and all goes Ok, but when turn off and on again the car, the airbag light turns on again, and in the diag shows A 1 A 3 7
....
Anyone knows how to solve?
I post the foto of the unit, the bad dump and the dump repaired by me.
Br
Mike
Hi.
Try this two dumps...please report...
You need to clear the faults.
Password is in your PM.
Best regards.
Best Regards.:wink:
eng_mike
23rd June, 2010, 03:22 PM
After a long time waiting a time to see what goes wrong, the costumer send to me the car,,, I see all, and all the things goes OK.
But when Disconect the car and conect again, the airbag turns on!!!
So I take the car to FORD Assistant, and they reset the error with the DIAG and solve the problem,
Many thanks.
Br
Eng_Mike
auto_geo
29th June, 2010, 12:32 PM
i have a crash dump from mondeo 7S7T14B056AC. can u clear it for me? thanks
regards,
geo
juozas10
29th June, 2010, 02:37 PM
i have a crash dump from mondeo 7S7T14B056AC. can u clear it for me? thanks
regards,
geo
Hi.
Try this.
Last foults are NECESSARY clearing by diagnostic.
Please report.
Password is in your PM.
Best Regards.:wink:
auto_geo
30th June, 2010, 03:41 PM
the dump was writed. i put on the car but the indicator is still on. the bosch kts diagnose no read errors
auto_geo
5th July, 2010, 05:33 PM
today i was to ford dealer and all errors was reset. the airbag led indicator is off now. all its ok. thx for help
gyalog_kakkuk
21st August, 2010, 06:26 PM
Hi all
Please help how to clear craash data this Airbag unit
Thanks
Best regards:
Krisz
morfej
22nd August, 2010, 06:29 PM
Give it a try and report back.
As it's done from virgin file probably no erasing of DTC shouldn't be needed.
Br
juozas10
22nd August, 2010, 08:46 PM
Hi all
Please help how to clear craash data this Airbag unit
Thanks
Best regards:
Krisz
Hi.
Try this.
Crash data cleared.
Last foults are NECESSARY clearing by diagnostic.
Best Regards.:wink:
gyalog_kakkuk
23rd August, 2010, 04:02 PM
Hi
Thanks morfej,juozas10
airbag lamp is off.
here is good dump, cleared diagnostic tester and work...
Thanks
SergeyIg
20th October, 2010, 05:16 PM
Thanks[/QUOTE]
Hi, needs the help in clear Crash and
SergeyIg
22nd October, 2010, 06:09 PM
Help to clean from "Crash", beforehand thank you.
SergeyIg
22nd October, 2010, 08:32 PM
See, it is correct is cleaned.
darwins
9th November, 2010, 07:14 PM
Hi.
I have this Mondeo 0 285 010 157 (7S7T 14B056 AC) with crash stored.
I have tried the Rusian Airbag software here on the site but its not working.
It would be great if some one could clear please.
Darwins.
darwins
10th November, 2010, 09:37 AM
A big thanks to juozas10 & gyalog_kakkuk.
I added gyalog_kakkuk crash clear into a the ICO program.
It worked spot on, In my case no codes needed clearing.
It seams some members say the fault memory needs clearing if the light stays on.
Darwins
:unionflag:
boss151
17th January, 2011, 02:43 PM
can you clear crash from this module:
Ford mondeo 2008
7s7t 14b056 ac
6700012792701
0 285 010 157
Best rgs and thank you.
bavlas
5th February, 2011, 12:31 PM
Hi,
i have problem with clear crash for FORD Mondeo 07
Airbag modul:
7S7T 16B056 AC
Bosch 0285010157
Eprom 95160
please help with clear dump
thx
bavlas
5th February, 2011, 03:29 PM
please check my cleared dump...car is from me 100km...
thx
Janomen
12th November, 2012, 06:24 PM
Please send me a password. Best Regards
rtr989
5th February, 2013, 10:20 AM
Please help to clear, i try all free bin`s from this thread, negative resluts...
May be juozas10 give me the password from his file?
conty
14th March, 2016, 05:15 PM
Hi,
Please help to clean from "Crash".
Ford mondeo 2008
7s7t 14b056 ac
0 285 010 157
eprom 95160
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.