208 GTI Immo

[Lusitano94]

Hello

I have a 208 gti with a MEVD17.4.2 the ecu burned, i have same hw and sw to replace it. I have read MPC and Eeprom on older ECU and have transferred only eeprom on new but car don't start ( no cranck, no pump ) and ecu locked in diag tool.
Do you think immo can be in MPC too. I want to keep the new MPC file because there is already a stage 1 on it. Or there is anything i do wrong ? Does i need to transfer all normally immo only on eeprom.

Here it is ori file from ecu burned (mpc and eeprom) and ecu stage 1 from the new.

If i do immo, will it work ? I have Immoff17 software. He can do it on eeprom or flash what's the best solution ?

Thanks for explanation or help.

[rafal]

do off in flash and all will be ok

[Lusitano94]

do off in flash and all will be ok

Hello I've done immo off on flash can someone check if it's well done. I never done it on this kind of ecu, i make it with software immoff17 and on flash with checksum corrected with winols.

[rafal]

Write and you will see
It's not atomic bomb

[Hayssam1]

first please look for the cause why it burned maybe you have a defective fuse

I made you a file eeprom immo off you can try and let me know if it works or not