someone can help me clean airbag audi a3 2007

[doctorelectrical]

someone can help me clean airbag audi a3 2007
brand bosch
reference: 8p0959655c
eeprom 95 640

[juozas10]

someone can help me clean airbag audi a3 2007
brand bosch
reference: 8p0959655c
eeprom 95 640

Hi.
Try this two dumps...please report...
Dump not tested.
Password is in your PM.
Best regards.:wink:

[doctorelectrical]

Thank juozas10
airbag light turned off.
it's all ok

[doctorelectrical]

MY PROBLEM CONTINUES.
When you clean the central light extinguished.
2 days ago but the airbag light turns on again.
someone can help me

[juozas10]

MY PROBLEM CONTINUES.
When you clean the central light extinguished.
2 days ago but the airbag light turns on again.
someone can help me

Hi.
What bad code read your diagnostic ????

Best regards.

[doctorelectrical]

module central

[budG60]

Can someone clear the attached file for me?
Thanks,
Harry

[ionut_mtb]

please write full ecu description!

[budG60]

Audi A3 2005
8P0959655C
SW: 8P0 959 655 C
Bosch 0285001666
Eeprom 95640

[my2jlw3s]

unhook battery for 30 min to reset computer.

[hacper]

Clear
pass pm

[mobileworks]

Please clear my dump is audi a3
Audi N? 8P0 959 655 c unit production 004.08.04
bosch 0 285 001 666... Thanks Juan

[budG60]

Hi,

I have used the file from hacper, but I am now getting the message that the control module is defective!
Any suggestions? Other 3 faults are under investigation
.

I also have 2 other modules (8P0 959 655 L and..H). Can I somehow use these modules if the ..C module is really defective?

4 Faults Found
00003 - Control Module
014 - Defective - MIL ON
Freeze Frame
Fault Status: 11101110
Fault Priority: 1
Mileage: 108351 km
Time Indication: 0
Date: 2008.09.11
Time: 20:59:31
01739 - Crash Sensor for Front Airbag; Pass. Side (G284)
008 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11101000
Fault Priority: 2
Time Indication: 0
01738 - Crash Sensor for Front Airbag; Drivers Side (G283)
008 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11101000
Fault Priority: 2
Time Indication: 0
00590 - Airbag Igniter 2; Passenger Side (N132)
001 - Upper Limit Exceeded - MIL ON
Freeze Frame
Fault Status: 11100001
Fault Priority: 1
Time Indication: 0

[IDS]

Hi.
Try this two dumps...please report...
Dump not tested.
Password is in your PM.
Best regards.:wink:


Hi Juozas

I need to clean the same airbag doctorelectrical

I can send the password for this file or clean this?

Audi A3 2007

8P0959655C

0285001666



Thanks

[IDS]

It works Solved

Thanks

[JFR-Tuning]

Hi.
Try this two dumps...please report...
Dump not tested.
Password is in your PM.
Best regards.:wink:
Hi juozas,

please can you send me the pass fore this file. I need it also this file.

Thanks a lot:goodpost:

[JFR-Tuning]

Hi,
juozas10

ore other surch the same clear dump for a
SW: 8P0 959 655 C
Bosch 0285001666
Eeprom 95640

or the pass

Thanks a lot

Frank

[JFR-Tuning]

Here the bat onee. Can someone clean or vergin it.

Thanks
95640W

[bysekomeko]

THANK YOU SUPER

[Pablo98]

Hello
please need to clean the same airbag
Audi A3 Bosch
8P0 959 655C
0285 001 666
eep 95640

I can send the password for this file
or clean my dump?

Thanks Pablo

[credoline]

How do you know that yours file is crashed ?

[Pablo98]

this unit is second hand
tomorrow insert in car and post dtc from this
airbag unit

[meda022]

Please send me pass.Thanks

[Bllinda]

Hi,

I have used the file from hacper, but I am now getting the message that the control module is defective!
Any suggestions? Other 3 faults are under investigation
.

I also have 2 other modules (8P0 959 655 L and..H). Can I somehow use these modules if the ..C module is really defective?

01739 - Crash Sensor for Front Airbag; Pass. Side (G284)
008 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11101000
Fault Priority: 2
Time Indication: 0
01738 - Crash Sensor for Front Airbag; Drivers Side (G283)
008 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11101000
Fault Priority: 2
Time Indication: 0

Does not need to change situ sensor with such errors?

[meda022]

have you clear dump for 8P0 959 655 C

[Kayhan 17#]

hey guys, i have the same car+module, what tools do i need to take a dump/erase the crash data?

i have an AGV4000, KKL Interface, Elm327, VCDS and a WillemProgrammer+SPI-Flasher, soldering should be no problem, even schematics for interfaces which could help me are welcome, f.e. vag-commander schematics if it helps me to build up a tool.

thanks

EDIT:
we solved the problem with VCDS by just simply deleting the error, the reason why we couldnt delete it earlier was, the the unit was not built in the car (GND) and a fuse + relay was burnt

[vampirodauva]

hi
i have the same problem with this unit . car is audi a3 2007.

Address 15: Airbags Labels: 8P0-959-655-94.lbl
Control Module Part Number: 8P0 959 655 C HW: 8P0 959 655 C
Component and/or Version: Airbag 9.41 H13 4260
Software Coding: 0070612
Work Shop Code: WSC 06314 000 00000
VCID: 428F4E3B664F


00003 - Control Module
014 - Defective - MIL ON
Freeze Frame:
Fault Status: 11101110
Fault Priority: 1
Fault Frequency: 8
Mileage: 89355 km
Time Indication: 0
Date: 2013.05.11
Time: 22:34:04

someone can help me
many thanks
regards

[Zeittt]

Hi

Try and report
pass pm

[Zeittt]

vampirodauva your pm box is full !!!!

[vampirodauva]

hi
thanks for help
my pm box is not already full.
regards

[Zeittt]

pass sent pm :)

[vampirodauva]

h~i zeittt
thanks for help , but dont work. have the same error
regards



Hi

Try and report
pass pm

[Zeittt]

Hi vampirodauva

Try again with more two files and report
same pass

[bahtiyar]

Hi.
Try this two dumps...please report...
Dump not tested.
Password is in your PM.
Best regards.:wink:


PASSOWORD PLS ?

[johntrombar]

Hello!! Please give me the file pass, i need the same problem

thanks!

[dragoshu]

Hello,
Can sombody clear crash for 8P0 959 655 C audi A3.
Thanks
Dragos

[dragoshu]

Nobody can make reset for this SRS?

[ismili1967]

try and report
pass in pm

[dragoshu]

try and report
pass in pm
Pass please

[ismili1967]

pass in pm