Volvo c30 crash data problem

[demon351]

Hello
I have Terrmic Continental 30773786.Procesor MC9SDG128E 1L40K.
I only have the effective Carprog 8,21.I read it,deleted thecrash data,i still displays the error of deployed airbags.
I think it doesn`t clear crash as it should.Can anyone help me solve the problem.
I read the upa input.

Sorry for my english

Thanks

[Mexaniks]

Here's the solution. And don't forget to click "thanks"

[demon351]

nie zadziałało, problem pozostał1069351

If necessary,i provide the vin 1MK755182045795

[Gary barc]

Your original file is intact

[demon351]

does that mean it has no errors?
Twój oryginalny plik jest nienaruszony

[hadrian]

You do not have crash data stored. You simply have error for driver seat belt tensioner. Do you replaced seatbelt or put anulator ?

[demon351]

all tensioners are functional.I have a second controler and everything works properly with no errors
Nie masz zapisanych danych o wypadku. Masz po prostu błąd napinacza pasa bezpieczeństwa kierowcy. Czy wymieniłeś pas bezpieczeństwa lub założyłeś anulator?

[demon351]

How can i clone the module,will UPA usb work?10697311069732

[hadrian]

The hardware is not the same. I doubt that eeprom transfer will help you.
But, you have open circuit error. Unplug seat belt tensioner and make shortcircuit in plug. Make again diagnose and verify if your error change to short circuit or resistance too low. If error do not change, identify the wires that going from driver seatbelt to airbag controller and make shortcircuit very close to module.

[demon351]

Ten nstalation is functional.I installed the original driver and everything works.The fault will be with the previous driver