PDA

View Full Version : VW Immobiliser 1, disable..



Digital Auto's
1st May, 2010, 11:59 AM
Hi, is it possible to do a immo-off from the immobiliser box (type 1, Valeo) on a 2.0 Sharan (petrol). Any solutions?

umoussa
1st May, 2010, 12:27 PM
it works with emulator.

What is your ecu type?

Digital Auto's
1st May, 2010, 02:26 PM
Hi, ECU is Bosch 0 261 206 601. How do you use the emulator? is it the same as renault, do you have a instruction manual. thanks


Can the engine ecu be immo-off????

umoussa
1st May, 2010, 09:47 PM
read the chip inside and post it here

carclima
2nd May, 2010, 10:13 AM
Hi, is it possible to do a im*o-off from the im*obiliser box (type 1, Valeo) on a 2.0 Sharan (petrol). Any solutions?

No you CANT make immo off with imobox...when I think litle more there is no car that you can do imooff inside this box..but you can read PIN from box and then pair it with youre engine ecu...but IF you realy like to have car without immo you need to disable it in engine ECU..there is a lot of usefull sw.here on forum,so you can download some killer version to see what chip you need to read,then read this chip put it here and check with us to see will it work..sharan use bosch managment so it is posible to make immooff..

Digital Auto's
2nd May, 2010, 04:01 PM
Hi, thansk for the replys. I've opened the ecu, can't find it listed in immo killer or otocheck! inside a three likely chips, 8-pin SOIC;

1) B57498 / 02T ANY8
2) 950403 / 9009
3) 435927 / DH8141

Nothing listed anywhere! Any ideas which one?

Thnaks

lupu_sandu
2nd May, 2010, 04:27 PM
If you have immo in good condition try to make another key for car using VCDS or Gambit.
If i remember correctly this immo box use a ID44 Chip (in fact is a PCF7935AS precoded).
If you have VCDS (or VCDS lite) to learn keys pin code is: 08193

umoussa
2nd May, 2010, 04:52 PM
That one "B57498" is 24C02

Digital Auto's
5th May, 2010, 02:17 PM
Are you sure you've got the cross-listing right for this. Just going to take it off and noticed the wiring to it is alot different to other 24c02's. Can you re-check...

kiripe
6th May, 2010, 08:08 AM
Just fit an immo emulator to the immobox and you're set to go. Easy peasy, cut trace, solder 3 wires, brooom broooom!