View Full Version : Need DQ200 Lunchcontrol active
elyshah665
21st February, 2025, 12:42 AM
hye need LC active on dq200 dsg 7
thank you...
andreaswe
21st February, 2025, 01:15 PM
Here is your file LC at 3800.
Test and report.
Pass at pm
Please click thnx button.
elyshah665
21st February, 2025, 03:14 PM
thanks you so much
i will report the result soon
elyshah665
22nd February, 2025, 08:53 AM
hye bro can u check the file
lc it not working
Krisfuzzy
22nd February, 2025, 12:29 PM
hye bro can u check the file
lc it not working
What did you do to try to make it work? can you explain since when you start the car?
elyshah665
22nd February, 2025, 12:44 PM
i start then wait for watertemp 90deg turn off esc put into sport mode fullbrake then try slighly put on gas but nothing happen
keyselberti
22nd February, 2025, 02:32 PM
Try and report !
pass after thanks and rep !
andreaswe
22nd February, 2025, 07:52 PM
its a boosted LC not antilag.
The Boosted Launch Control on the DQ200 does not have any impressive sound effects, such as backfires or cutters. What you'll notice is that the car holds the revs steady while raising the pressure on the turbo so you get a stronger launch.
Antilag Launch Control is activated by the ECU alone, adjusting the ignition and injection to maintain pressure without needing anything from the DSG.
elyshah665
22nd February, 2025, 10:42 PM
thanks bro for your help...
elyshah665
23rd February, 2025, 11:33 PM
its not working i already try all mode D,S,T ,engine temp reach 90c oil temp 90c,esp off...
notthing happen..
keyselberti
24th February, 2025, 01:14 AM
Do you know how to activate it?
You need to press brake and gaspedal at same time! it dont do nothing with engine temp!
elyshah665
24th February, 2025, 03:00 AM
yes i know how to active it,,,,full brake and when i step on gas rpm not going higher then 1200 and the car want to go without realease the brake pedal..
wrenchse1
24th February, 2025, 09:33 AM
hye need LC active on dq200 dsg 7
thank you...
Try.
Pass = thx+pm
andreaswe
24th February, 2025, 09:41 AM
if even this file does not work then something is done by the engine , all my files are tested and work 100%.
Pls test and report.
Also select a mode , dont try it at N.
elyshah665
24th February, 2025, 11:00 AM
thank given tq bro
elyshah665
24th February, 2025, 11:01 AM
will report soon thank you bro
laura
25th April, 2025, 07:10 AM
Did it work?
laura
25th April, 2025, 07:23 AM
Please tell meee
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.