2014 honda civic 77960-TR0-A222-M1 Internal Failure

[alsa75]

Hello,

I have a question about 2014 Honda Civic SRS Module. Can someone please check my Crash file and 2 other files that are clean crash?.

Here is the situation:
I'm working on the 2014 Honda Civic, and I did reset the airbag srs module, but the weird thing is that the SRS Case shows 77960-TR0-A222-M1, but when I read it with the Obdstar Airbag tool, it shows 77960-TR0-A260, anyway, I read the eeprom 95640 and I clear it from 0240 to the end with 0-s (I did this procedure for many Civic and were successfully cleared), now, with this srs after cleared I installed to the car and Airbag light is ON and I have the DTC U3000 Internal Failure.
I did download the virgin file from this forum, and the same DTC U3000 shows. When I test the module with the OBDSTAR, it doesn't show this DTC. I'm so lost with this SRS.
Please someone check these files.

Thank you

[dragon100]

Check and report, 2 variants fix ...

[alsa75]

Thank you dragon100. I will test it tomorrow and report.

[fuzz1]

Hi

Most likely the module has failed or you knocked off a component

[alsa75]

I didn't touch any component. Just read the eeprom.

[fuzz1]

Read in circuit?

[alsa75]

Yes, as I always do. Please do not tell me to desolder the eeprom. It's to small. I have a good clamp for that tinny eeprom.

[dragon100]

Send me link for this good clamp I must buy ...

[alsa75]

Hi Dragon100.
I wrote both files, and the same thing. I found out that the module itself was defective. I bought a used module in junkyard and wrote the clean file, and worked perfectly.

thank you

[alsa75]

https://lockpicktool.com/product/pogo-pin-adapter-for-soic8-msop8-tssop8-eeprom-chips/?gad_source=4&gbraid=0AAAAA9gNjMJL6Af12zuIzUvmEf5tLzukX&gclid=EAIaIQobChMIjsyl4P-FjAMVnTrUAR0WLhvXEAQYAiABEgLHqPD_BwE

These are adapters that I’m using, but here in this website the adapters are expensive.
I don’t remember where I bought them but I know that I paid around $290. Those adapters are amazing.