whats latest firmware for 360

[leeunwin]

just bought a sep 2007 xbox flashed already

but some games latest ones wont play

[cgscott]

Benq LT 1.1
Liteon LT 1.1
Samsung 1.61
Hitachi 1.51

[leeunwin]

is there a way to find out what firmware my 360 is using?

[ezzda1]

yes dump its firmware, if it isnt playing the newer games it needs updating, dumping the fw is part of the process.
you need to find out what drive it has in it,
read the jungleflasher tutorial, MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=IF91SN2M) it will tell you everything, from how to find out what drive you have to flashing it.

[leeunwin]

ive read all tuts before jungle flasher ect i can take xbox apart no props get drive out but id be nervous flashing it incase i screwed it up mate

plus i havent got a spare sata connection on pc to do it

[cunny]

ive read all tuts before jungle flasher ect i can take xbox apart no props get drive out but id be nervous flashing it incase i screwed it up mate

plus i havent got a spare sata connection on pc to do it

You will need the via 6421 pci card then, about ?8 on ebay. If its any other drive other than the hitachi, you cant brick it as long as you have the original dump.

[leeunwin]

any idea where to get the latest firmwares from??? ps cheers for info lads

[leeunwin]

mines got a benq in it so wanting latest firmware for that drive

[ezzda1]

xbinz,
or team jungles twitter page if its lite- on or benq,
http://twitter.com/teamjungle

[leeunwin]

hiya cheers got benq ixtreme ltv1.1 is this latest

[leeunwin]

when i connect the drive to pc do i need to leave the dvd in xbox as obviously that powers the drive?

[cgscott]

Yes as this powers the drive. On the benq drive when you Into Device you have to power cycle the drive on and off. Then you can read it then spoof the key onto new firmware and thats it done.

Make sure you read the guide properly before trying this as you must get the key from the drive and spoof.

[leeunwin]

so if i flash my drive with the latest Benq LT 1.1 i will beable to play any game no matter what wave it is?

[cgscott]

Thats the latest firmware yes.

[leeunwin]

ok thanks for all replies going to try and do it for first time later on today please keep a eye on this thread for me as if i do sumat wrong will come back on for help if that ok with u guys?

ps ive already got jungle flasher downloaded latest benq firmware and put it in proper folder in jungle flasher got me xbox apart

got the via 6421 pci card installed in pc all working

where do i click the sata into the card as there's 3 sata ports??

also i take it i need to put the drive into mode b before i start anything its the benq drive i havent got the kit so guna have to use the half open drive thing?????

many many many thanks in advance regards lee

[cgscott]

Plug it into the sata closest to the front of your PC. Also the benq does not need half tray open.

All you need to do is Intro device. Power of and on quickly. It will the give you 0x73 status meaning it is seen. Click read then load new benq firware into JF. Spoof key over. Click Write. Then it will write and verify write.

Then click Outro Device. And this returns the drive back to normal status.

Test the drive by ejecting if it does then it is done proper. I usually read the drive again to check the flash.

The new benq LT 1.1 will show as Stock drive once flashed over and make sure your key is spoofed.

[leeunwin]

all done cant belive how easy it was took 3 mins basicly

thanks so much for all help