View Full Version : iveco dalyedc16c39 off
hamza338
4th May, 2010, 09:23 PM
hi all
i'm looking for an immo off tested for iveco daly 3,0hpi edc16c39
thanks
lupu_sandu
4th May, 2010, 10:08 PM
Read and post here dump from 95640.
Maybe i will be able to help
hamza338
4th May, 2010, 10:33 PM
thanks m8 for reply,but i thank the immo was stored in eeprom and flash ,what do you thank?
lupu_sandu
5th May, 2010, 06:33 AM
I think is stored only on eeprom
hamza338
7th May, 2010, 06:44 PM
here is the dump my friend
lupu_sandu
9th May, 2010, 03:04 PM
Try this and post result:
bingo76
10th May, 2010, 10:52 PM
I really don't want to take the courage, but I think this solution in will not work in this case.
Today I tested on a 2008 model, but the solution from 2005 unfortunately didn't work.
Anyway we will see soon...
hamza338
24th May, 2010, 10:19 AM
hi all iveco ok don't work,any solution i'm interesting
thanks
hamza338
7th July, 2010, 07:25 PM
if you have the tool for read the flash try this solution maybe can run your engine
best regards
keygargoil
6th July, 2011, 03:40 PM
Read and post here dump from 95640.
Maybe i will be able to help
can you do a immo off for this bosch 0281011228 95640
lupu_sandu
6th July, 2011, 04:14 PM
can you do a immo off for this bosch 0281011228 95640
Your file off:
keygargoil
6th July, 2011, 04:41 PM
Your file off:
the file isnt working does the immo box need to be plugged in
ecu
15th August, 2011, 12:08 PM
lupu can you make off for me..
lupu_sandu
15th August, 2011, 12:10 PM
And your file is...on the moon?
ecu
15th August, 2011, 12:10 PM
i attached..
lupu_sandu
15th August, 2011, 01:44 PM
lupu can you make off for me..
Your eeprom off:
ecu
15th August, 2011, 04:10 PM
which is pass
lupu_sandu
15th August, 2011, 06:36 PM
No thanks = no pass
ecu
15th August, 2011, 10:25 PM
sent in pm,tnx in advance maybe didnt come..thank you:tee:i
ademram
22nd September, 2011, 04:51 PM
plezz immo off ( no addys :rulez: ) thanxxx advonsss.
mariusf11
5th October, 2011, 08:51 PM
Hi group. Can someone help me to clear immo from the attached file. I tried with different files but no result. Thanks in advance.
jmush303
13th October, 2011, 03:24 PM
Hi
could someone make immo off for this ecu?
0281011228
edc16c39
iveco 35c12
hamza338
13th October, 2011, 04:03 PM
Hi group. Can someone help me to clear immo from the attached file. I tried with different files but no result. Thanks in advance.
here your file off and post result:
pass in pm
carhelp
19th October, 2011, 08:06 AM
Plese immo off Iveco edc16 eeprom 95640
THX
ashraf2000
22nd October, 2011, 01:58 AM
try this pass in male
michpm
2nd November, 2011, 05:46 AM
Please help me with immooff
Iveco EDC16
sery22
26th November, 2011, 12:24 AM
please immo off
thanks,
sery22
26th November, 2011, 12:27 AM
please immo off
thanks,
sorry this is the file
bedone
12th December, 2011, 05:32 PM
please help me with immo off
daily edc 16c39
0281012193
thx in advance
mouss
1st January, 2012, 12:14 PM
HI
what's the name flasch is inside this ecu iveco, i open it but i don(t see flash
thank
tony59
4th January, 2012, 12:52 AM
hello lupu-sandu,
please give me a psw for this file ,I have a problem with iveco edc16 028 011 228.
thx in advance
mark057
3rd February, 2012, 08:28 PM
i need immo off for my iveco 2,3 edc16c39,immo box is full of water and this is the last solution
i attach original dump
pollonzo
6th February, 2012, 06:58 PM
In attachement the file HW 0281012193 SW 1037378086.
Please help me for immo off.
Download iveco.zip from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/6vw2oh)
Thanks
cfgebel
6th February, 2012, 08:07 PM
In attachement the file HW 0281012193 SW 1037378086.
Please help me for immo off.
Download iveco.zip from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/6vw2oh)
Thanks
try this ..........
pollonzo
7th February, 2012, 10:11 AM
try this ..........
I'm sorry, but with this file the car not run.
Do you have other solution?
Thanks
neriuks007
7th February, 2012, 10:28 AM
try and report
pollonzo
7th February, 2012, 12:16 PM
try and report
The file did you sended is 575kb.
Why?
Thanks
neriuks007
7th February, 2012, 12:51 PM
read by bdm,do you try it?
pollonzo
7th February, 2012, 01:22 PM
i read the flash and e2p with batronix.
Do you need a reading with bdm?
Thanks
pollonzo
8th February, 2012, 11:34 AM
I read it by bdm and the file is the some,
Thanks
mark057
8th February, 2012, 04:40 PM
i`ve tryed all solution for this ecu and no way to start the van.could someone modify my dump in order to deactivate the immo sistem!!!!
i upload again my dump
thx in advance!!!
neriuks007
8th February, 2012, 07:18 PM
mark057 read by bdm
mark057
8th February, 2012, 08:53 PM
upa.wellon,x prog m and willem give me the same dump.i assure you that my dump is 100% correct!
mark057
8th February, 2012, 09:48 PM
try and report
i don`t understand what file is this 574kb.it can`t be eeprom dump!i think you are wrong mate!if it was flash file,then it should have 512kb or 1024kb or 2048kb
another issue:no matter how you read an eeprom if you read it correctly,the size of readed file must be the same,but no way an eeprom 95640 have 1kb or 574kb,it must have 8kb at full reading!so... if you want help someone,do it but stop posting for make experiments
pls correct me if i`m wrong and hope that someone will give me a tested solution
neriuks007
9th February, 2012, 08:51 AM
http://www.digital-kaos.co.uk/forums/f178/iveco-daily-edc16-immo-off-254477/ for others working,only for you trouble. . .
neriuks007
9th February, 2012, 11:05 AM
this is 8kb
sskorus
9th February, 2012, 05:42 PM
hello. please romove immo Iveco. thanks
mihai_vyt
12th February, 2012, 04:30 PM
here you have immo off dump
roibix
18th February, 2012, 12:45 AM
Hello all!I have just a question.After immo off do you have to disconect immo box for EDC16 IVECO Daily 2000-2006 euro3?And for Daily 2006-2011 Euro 4,5 immo off will work if i just rewrite eprom from EDC?Thank you all!
workdamnyou
18th February, 2012, 09:37 AM
Hello all!I have just a question.After immo off do you have to disconect immo box for EDC16 IVECO Daily 2000-2006 euro3?And for Daily 2006-2011 Euro 4,5 immo off will work if i just rewrite eprom from EDC?Thank you all!
For 2000-20006, write file to ecu and disconnect immo box. Tested and working.
vallinet
13th April, 2012, 07:37 PM
I need immo OFF for 2005 IVECO Daily 0281011228.
BDM Read E2prom
Thanks.
waldi1979
13th April, 2012, 08:07 PM
Pass PM
episcop
23rd July, 2012, 12:12 PM
Pls. Need immo off .... Iveco edc16
0 281 011 288
95640
datapage
23rd July, 2012, 12:43 PM
its immo off .... Iveco edc16
0 281 011 288:beerglass:
no pass = thanks
episcop
23rd July, 2012, 02:18 PM
its immo off .... Iveco edc16
0 281 011 288:beerglass:
no pass = thanks
File size??? not from st95640......
cfgebel
23rd July, 2012, 02:26 PM
its immo off .... Iveco edc16
0 281 011 288:beerglass:
no pass = thanks
.................................................. ......
this is his correct size
ker0sin
27th July, 2012, 02:25 AM
Hi
could someone make immo off for Iveco Daily_ EC16C39; bosch 0281012193;
ST95640 inside.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.