Volvo sid803a

[hrmotorsport]

Hi mates, its possible remove immo on sid803A ?


i have a sid803A and may be have a problem in flash, have C301 error.


i tried clone but have same problem then its not hardware unit damaged, so i think maybe its flash error, if clone only eeprom car will start? or immo its on flash too?


thanks a lot

[lupu_sandu]

Immo is in eeprom only

[kiszka]

Hi mates, its possible remove immo on sid803A ?


i have a sid803A and may be have a problem in flash, have C301 error.


i tried clone but have same problem then its not hardware unit damaged, so i think maybe its flash error, if clone only eeprom car will start? or immo its on flash too?


thanks a lot
why didn't you add the ECU readings, we have to tell fortunes using coffee grounds

[hrmotorsport]

yes, better post flash

[rafal]

check other issue - fuel/air components
example vacuum components

[elektronik325]

Hi friend. This happened after uploading the dpf off file? I/O Terminal has a problem with the checksum. But how do you have a second ecu if you tried to clone it.

[hrmotorsport]

i restored ori file without dpf mod and have same issue.