PDA

View Full Version : Cummins N14 Original Dump


elecautocr
7th May, 2010, 11:22 PM
Hello Members:
I need Original ECU dump for Cummins N14 Celect Plus part # 3408300 (2x 28F512, one 28C64) 525HP CPL 2391 ECM code 10300.06.
Thanks very much
makura
13th May, 2010, 05:08 PM
Cant some just read eproms from a new ecm and just label the the chip dumps and help out here.i am also looking for these files and i am sure reading the 28c64,and the two 28f512 wont hurt.
than:damnmate:ks in advance
juanje
5th January, 2011, 01:05 AM
only put news eeprom or erase eeproms n recalibrate whit incal or calterm...this work
makura
5th April, 2011, 10:10 AM
only put news eeprom or erase eeproms n recalibrate whit incal or calterm...this work
Does this work for fault codes 111 and 343?
amishmafia00
13th April, 2011, 03:37 AM
if you tell me how to do an ecm dump i may be able to help you, we have a 550hp that we had to put a 525 computer onto. I am trying to figure out how to get the calibration out of the old computer to put in the new one
hercamp
13th April, 2011, 10:56 PM
Does this work for fault codes 111 and 343?



yeah my friend it works...need to be erase all!!!!!!!!!!!1 and after that use calter, is better....or incal.
jctech
15th April, 2011, 04:18 PM
if you tell me how to do an ecm dump i may be able to help you, we have a 550hp that we had to put a 525 computer onto. I am trying to figure out how to get the calibration out of the old computer to put in the new one

Use Calterm to upload the 550 cal from ECM onto the PC then download from PC into the new ECM
elecautocr
15th April, 2011, 08:29 PM
yeah my friend it works...need to be erase all!!!!!!!!!!!1 and after that use calter, is better....or incal.

Erase 2 x 28F512 and the 28C64 ??
hercamp
24th April, 2011, 10:25 PM
I mean erase with calterm....with programing tool!! I ve seen that 28c64 is replaced for a newer and put the dump of copied from another good...Im not so experimented in those progrmaing but with calterm Ive solved the 111...many times like Jc tech say.

just need to have bench and rom boot arness ready and try not take off power even if the programing fails..

is just my experience
dieselequipos
29th July, 2011, 04:40 AM
any one could upload a good dump of 28c64 ???
mmfix
5th August, 2023, 04:51 PM
Hello Guys pass many years do some one has Dumps on EEPROMS for N12 Celect and Celect PLUS ?
Im looking also for those 2 please help if you have it !+ Reply to Thread (https://www.digital-kaos.co.uk/forums/newreply.php?p=1191974&noquote=1)
Celect plus - 28F512 and the 28C64
Celect - 2x AT27BV256 and the 28HC64