sotiris70
16th November, 2008, 01:08 AM
E2 boot from HDD with NLB image
If you want to preview E2 and have no serial cable, this can help you.
Requires: NLB image installed in flash!
Here is a little guide with a very small flashimage, that prepare your uboot for change, to use the "1" and "2" key to switch between DGS and E2 boot.
Note, you need to download E2 image from a different location.
This file is just instructions and a little flashimage for 900/910/9000.
Thanks to dexter
If you want to preview E2 and have no serial cable, this can help you.
Requires: NLB image installed in flash!
Here is a little guide with a very small flashimage, that prepare your uboot for change, to use the "1" and "2" key to switch between DGS and E2 boot.
Note, you need to download E2 image from a different location.
This file is just instructions and a little flashimage for 900/910/9000.
Thanks to dexter