help immo off suzuki

[mavi]

Hello

need help to make im*o off on suzuki vitara 2.0 TDI

ECU DENSO

068D2 9G
33920-68D20
RF3A 18 881A
275800 - 5000



Need help the eprom TC97101P don?t have dumps is clean

can?t make im*o off.

have enyone a dump with im*o off for this car?

thanks for the help

Regard

Mavi

[mavi]

Hello

problem solve

[choro]

Hello

problem solve
please help me how to solve this problem I have this problem
please help for this

[doslamer]

hello i have a question - with what i can read tc97101p or beter is - like what i must read this toshiba memory. i have willem,ponyprog,xprog-m , may be i must buy another one . Any suggestion.

[tinchocbr]

With beeprog you can read and programed this memory.

[faserpt]

I have the same problem i need dump immo off
ECU DENSO
068D2 9G
33920-68D20
RF3A 18 881A
275800 - 5000

[chiperito]

Marvi hello I have the solution for that suzuki please send the picture of the ecu to see if the same that I have
because you have to make a jumper on the motherboard to boot my email is rubencardozo284@hotmail.com

[slave]

can have photos of the bridge

[mcgywer]

Hi,
have Suzuki
Grand Vitara 2,0 TD with that type of ecu- remowve Toshiba chip and immo box and car starts fine.

My question - will DTC be store? Can make diagnose of car?

Here's my working parts from car.


Thanks in advanced

[quinnd]

Hi,
have Suzuki
Grand Vitara 2,0 TD with that type of ecu- remowve Toshiba chip and immo box and car starts fine.

My question - will DTC be store? Can make diagnose of car?


Here's my working parts from car.


Thanks in advanced
Hi, can you please confirm that removing the Toshiba chip will remove immo and car will start ok?
I have exactly the same ecu as yours.

[ngakson2002]

Hi, can you please confirm that removing the Toshiba chip will remove immo and car will start ok?
I have exactly the same ecu as yours.

Hello Mate

Immo off very simple on this ECU i did one some few days ago and work perfect
Infact
1) Remove the ECU from the car, open it, identify the eprom TC97101P and desolder it
2) Disconnect the immobox
3) Fit back the ECU to the car and start it
Works 100%


Regards

[quinnd]

Hello Mate

Immo off very simple on this ECU i did one some few days ago and work perfect
Infact
1) Remove the ECU from the car, open it, identify the eprom TC97101P and desolder it
2) Disconnect the immobox
3) Fit back the ECU to the car and start it
Works 100%


Regards
Another success story here, customer says all going well after removing chip

[Pepita]

Hello Mate

Immo off very simple on this ECU i did one some few days ago and work perfect
Infact
1) Remove the ECU from the car, open it, identify the eprom TC97101P and desolder it
2) Disconnect the immobox
3) Fit back the ECU to the car and start it
Works 100%


Regards

hello ngakson2002

Light up the malfunction indicator lamp?

[supersub14]

Thanks!! Ive just spent 5 hours working at my jeep but it now starts. Cheers everyone. Worst part was removing the chip from the ecu as i was worried i was gonna break something lol

PS i had error code 81

[svetko666]

the excellent help work 100%

[teodanci]

thank you very much

Immo off very simple on this ECU i did one some few days ago and work perfect
Infact
1) Remove the ECU from the car, open it, identify the eprom TC97101P and desolder it
2) Disconnect the immobox
3) Fit back the ECU to the car and start it
Works 100%


Regards[/QUOTE]