starview 6

[grahem.parnell]

could eney body let me no how iset upsv6 to pick up all channels have just bought one i live in westyorkshire is there eney special area codes to put in

[antsumner]

download this m8 put on usb stick follow instructions
Digital Kaos - Downloads - Starview 6 UK Firmware V1.00 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/starview-6-uk-firmware-v1-00-1220/)
let me know how u get on i live in leeds could do it for you if your not miles away

[grahem.parnell]

what is the signal rate for my area if i carnt get all programes then ill let you no then maybe you could come and set it up for me then i would sought you out thanks

[antsumner]

6952 m8 hope this helps

[antsumner]

have you done it mate

[003294]

download this m8 put on usb stick follow instructions
Digital Kaos - Downloads - Starview 6 UK Firmware V1.00 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/starview-6-uk-firmware-v1-00-1220/)
let me know how u get on i live in leeds could do it for you if your not miles away

Is version 1.0 the latest firmware for UK or are we supposed to use 1.04? and what is the difference?

[grahem.parnell]

i carnt get eney programes to come on all it says is no signal how can i get intouch with you about you setting it up for me

[topshoter187]

i carnt get eney programes to come on all it says is no signal how can i get intouch with you about you setting it up for me

Make sure you cable connection is screwed right to the end, also if you are using any splitters try without splitter

[safc1234]

make certain you are useing lan port as well when you are installing new firm ware, the star view needfs to no your i p address and sever it does it auto, good luck.:heeeelllllooooo:

[safc1234]

put area code in then do auto seach,hope it works for you,

[Lox]

Hi does anyone know if the SV6 (& combo) can receive N3 channels??

[123moh]

Hi mate i am also havin the same problem with the signal of my sv6 i jus got it and tried everythin and still dont work plz can u tell me wheather u have fixed yours so i cud do the same

[brainwave]

you will find the latest software for the starview 6 below

http://www.digital-kaos.co.uk/forums/f83/starview-6-lan-145975/

[dianered]

can anyone help just got starview 6:musicus:

[Spacewhsiepr]

Hi, setup my Starview 6 box and cannot find any channels, i used to have a SV4 box so im not a novice , or so I thought.

System ifo is as follows:
SW Carling 1.00.0 UKC (may 08)
LDR 01.13 (0909)
HW: IRM-1.00-IR-300-8-0
Ram 32mb, ROM 2mb (066%)
01.56

It is showing Nagra:

provider 0 5401
" 1 5501
" 2 5A01
" 3 5B01
" 4 5C01 NTL Digital cable
" 5 5D01
" 6 5E01
" 7 5F01
" 8 1311
" 9 3711
" 10 4701 Euskaltel
" 11 4B11

anyone any ideas ~??

I connected a 15m LAN cable and this shows up on the IP set up also/

I have done system restores, scanned over a dozen times, oh Im on Tele*est so I know its 6952.

Im at my wits end,

Tried all the usual, cabble is screwed right in,when scanning the signal strength is between 10% and 90%.

Please HELP?

Spacewhisper:-)