Vauxhall/Opel Pincode reader has been released

[senyor]

Hi everyone!

[tommyb72]

Anyone Else Purchased This yet. If So what Is your opinion on it.

[rocris]

I do not think so because I am using NasraTech products and I am very hapy. Also they are very serious. Many people are using their tools like me...

Me too i have bought tools from nasratech but i am disappoint..i was cheated...and i know another 5-6 persons in my situation.

[z786]

so which part hav u got a problem with then?

[obdmaster]

Come on guys, dont leave bad comments unless you give a reason why?
Senyor have you tried opel pin reader?

As it appeals to me BIG TIME.?


Is anyone else using it yet? If so what do you guys think?

[z786]

im kinda tempted aswel lol

[alexics]

If they are saying they can read the pin codes from the tms370 boards without removing the processor then they are probably being a bit dishonest. I know that one is locked and locked permanently. If you don't believe me disassemble it and have a look. They have been worse than Ford usually are on this one.

[obdmaster]

If they are saying they can read the pin codes from the tms370 boards without removing the processor then they are probably being a bit dishonest. I know that one is locked and locked permanently. If you don't believe me disassemble it and have a look. They have been worse than Ford usually are on this one.


The pin code m8, as far as im aware is read from ECM, as is codecards carprog version which is alot more expensive.

Does anyone have any screen shots of NASRATECHS opel pin code reading tool, so we can take a look?

[z786]

thats the first version wich was causin ppl problems
the new1 is released by cryptowork who hav recently taken over

[dafdiagnos]

what sort of price will these sell for?

[z786]

$880 USD mate

check it out
NASRATECH (http://www.nasratech.com/opel.php)

[paul_12345]

Anyone know what the shipping time is? and what delivery method they use, have emailed them a couple of times but no reply.. thought presales comms would be good hopefully their aftersales comms is better

[PremierD]

The original software released by NASRATECH (http://www.Nasratech.com).
Has problems .... The company who took over development (and you know who you are).. and currently working to fix this problem .......and by all accounts will succeed..

[RS-4]

Hallo,
does anyone know anything about this device?

SMOK (http://www.magicdash.pl/index.php?lang=en&id=oferta&kategoria=2&produkt=21)

Best regards

[ironjoe]

Paul
I ordered mine on tuesday and it came today (thursday) But ive been told i have to wait till saturday until they send me the software by email,which is a bit of a waste of time as far as delivery goes.plus i need a car-pass tomorrow so thats 25 pounds out of pocket needlesly.
Joe

[nutloose]

(not with tokens).... the Ford Mazda software is restricted.
And you will need support if they use the same system that will not remember your original username and password even if you keep a screenshot record to work from.

I think you will still find that a lot of the pin codes will have to be read from the display or other controllers rather than the ECU.

SO if you think that it will be plain sailing to get a used ECU and just read the PIN direct from the ECU dont wonder why other pincode reading manufacturers produce a smaller compatiblity list. (Codecard for example)

The cryptowork ford stuff works great except on tdci mondeos, but I think that is the cars. The support does work- it has to every month! If the opel stuff had an accurate and completely honest compatibility list I would be happier because the list appears to exagerate by implication somewhat, I REALLY DO WISH TO PROVE MYSELF WRONG.

[squirrelbandy]

anybody received their software yet ?

[obdmaster]

Paul
I ordered mine on tuesday and it came today (thursday) But ive been told i have to wait till saturday until they send me the software by email,which is a bit of a waste of time as far as delivery goes.plus i need a car-pass tomorrow so thats 25 pounds out of pocket needlesly.
Joe


Have you got your software joe? Is all good m8?

[nazz2]

Thanx guys for the warning i was going to buy one,but not now,i stick to my lovely ad100pro, also crypto product are over priced,people may concider buying ad100 pro,it hasnt let me done on a coded access and gm yet.,if the engine code is there then it will do it.

[alexics]

Thanx guys for the warning i was going to buy one,but not now,i stick to my lovely ad100pro, also crypto product are over priced,people may concider buying ad100 pro,it hasnt let me done on a coded access and gm yet.,if the engine code is there then it will do it.

The AD100 is good I know the guys at Advanced Diagnostics and they put in a lot of effort. As to Nasratech, if as Senyor says they are testing remotely this may mean they have OS issues. I wouldn't defend a fraudulent company but I know how software can go wrong and how long it can sometimes take to fix. Probably the best option is for those customers who have paid is to ask for something extra as compensation, a free software module perhaps. If that is agreeable to Nasratech then everyone wins eventually. I know how frustrating the wait can be but there are various options to pursue.

[squirrelbandy]

ok just to add to this thread again , cryptowork emailed me monday and asked if i had access to test their software so i said yes .
they have connected to my corsa c to test software but there was a problem with software (bug).
they have been connecting on and off to my vehcle for 3 days now are ok i admit are slowly getting to the bottom of it but they are trying very hard to sort it out . i am in the same boat as everybody else with this at moment but only difference is i offered to try to assist.
i am on the fence with this 1 as i really want it working .
i do not know the company but only that i bought cryptocalc for fords when it was released early again and had to wait for software which was sorted in the end and still works good for me.
please be patient at moment as it will get sorted and i know to say sorry they sent out email with special offer to appologise for the inconvinience of this , i am not happy with the situation but as i said i want it working properly .
give it a chance please .

[PremierD]

I aggree with you

Funny that ... had a feeling that you would ....;)

[squirrelbandy]

i dont need anybody agreeing with me thankyou i am just stating my situation , if it does not work i will demand my money back , i think they need to be 100% certain that software was working before selling to us lot , i just knew this might be the case but as i stated earlier i had used them before with same situation so maybe i expected this . not that its the right way to do buisness but live and learn ey .
they will connect again tomorrow and hopefully this will be sorted , i have every faith , please beleive me =if i was not happy i would be kicking up a stink about this but i know it will be sorted soon (hoping) i will keep you all informed.

WATCH THIS SPACE

[paul_12345]

Dont look too good having problems with a corsa C which the opcom can retrieve the pin + program.

I had an email saying the opel interface is 'ready' and the ford pats is 1 month away.

Pretty poor way to do business your meant to pay people to test products not charge them, should at least offer it as 'beta version' at a reduced price untill its fully working - at least it would give a reward for putting up with bugs etc.

Hopefully they sort it out asap, as it looks like it could be a usefull tool.

[z786]

if im not mistaken, i dont think the problem is with pulling the code from the corsa, its the program itself they are having problems with running

[Meat-Head]

Pretty poor way to do business your meant to pay people to test products not charge them,

No that's fine, nothing wrong with selling 2nd hand phone kits as new either, or spraying ppls alternators silver and charging for a new one.

Just hope it last's the 3 month warranty. Remeber to charge the customer for remaval/reifit if packs up in warrany period.

[ironjoe]

would think that they would have a car that could be a test vehicle :celtictop:

[squirrelbandy]

ok just to share this ,as this is the email they have sent out to customers who are waiting for software.



Dear Customers,

We are so sorry about delay but we got some technical problems with our servers so we could not inform the customers about that.

The software was actually ready and we were prepairing setup files, but while we were testing, we faced with some windows operating system related errors so we are trying to fix that error now. We can assure you that we will send it to you as soon as it is ready to go.

For customer satisfaction, we want to make up for delaying. That is why we are offering you two options. If you need, you will able to get Hyundai, KIA VIN TO PIN im*o CODE calculator 50% off the price. If you do not need it, we can upgrade your CryptoWork licence. (for basic package users 20 to 30) or (for standard package users 40 to 50) for free.if you have not used our Cryptowork software for ford and mazda before, we can give you 20 codes as free.


We apologize again and thank you for your patient, really appreciate that.
(end of email)





like i say im on the fence and waiting patiently so you must make your own minds up .
i am happy to wait for now.

[alexics]

ok just to share this ,as this is the email they have sent out to customers who are waiting for software.



Dear Customers,

We are so sorry about delay but we got some technical problems with our servers so we could not inform the customers about that.

The software was actually ready and we were prepairing setup files, but while we were testing, we faced with some windows operating system related errors so we are trying to fix that error now. We can assure you that we will send it to you as soon as it is ready to go.

For customer satisfaction, we want to make up for delaying. That is why we are offering you two options. If you need, you will able to get Hyundai, KIA VIN TO PIN im*o CODE calculator 50% off the price. If you do not need it, we can upgrade your CryptoWork licence. (for basic package users 20 to 30) or (for standard package users 40 to 50) for free.if you have not used our Cryptowork software for ford and mazda before, we can give you 20 codes as free.


We apologize again and thank you for your patient, really appreciate that.
(end of email)





like i say im on the fence and waiting patiently so you must make your own minds up .
i am happy to wait for now.


Isn't it strange that they make this offer after my post suggesting this? Anyone would think that they were reading the forum while trying to sort out there problems.

[z786]

either that or its common business sense lol

[PremierD]

I have no doubt that they are reading..... Hope they take on board the suggestions ... (well some of them ) anyway...............lol

[ironjoe]

squirrelbandy, any news yet ?
cheers Joe

[RussiaJester]

Nasra's Hyundai calculator always wrong calculating to pins. I send few VIN numbers and replies was always wrong codes (I have ICC last version, added Hyundai * KIA 2010) I think here are some mistakes. Be carefull before buying. Because still not fixed this.

Name of "Senyor" is Gokan and person of Nasra$hit. He / she make it here free advise for buying own products. Because selling for himself :)

Ford incode calculator never cracked? is big lie. LOL!! Ford calculator using standart HASP USB dongle. Can emulating with Toro's emulator. I have get dongle image from my friend and working perfecly with emulator. Then i'm using ollydebug + Procdump + Impfixer and finally don't needing dongle again. Nasra guys using DAT. file for 2. protection. Program coding with Miscrosoft's Foxpro. With free Defox decompiler program can full unpack all program. Just patch to checkpoint (addr = 64d8ad adress put e9 LOL) and use no limit - no nasra - no dongle shit. LOL

About Nasra's Opel pin reader, I dont know much about this program. Codecard's Opel software good for all :)

Cheers!

[paul_12345]

Nasra's Hyundai calculator always wrong calculating to pins. I send few VIN numbers and replies was always wrong codes (I have ICC last version, added Hyundai * KIA 2010) I think here are some mistakes. Be carefull before buying. Because still not fixed this.

Name of "Senyor" is Gokan and person of Nasra$hit. He / she make it here free advise for buying own products. Because selling for himself :)

Ford incode calculator never cracked? is big lie. LOL!! Ford calculator using standart HASP USB dongle. Can emulating with Toro's emulator. I have get dongle image from my friend and working perfecly with emulator. Then i'm using ollydebug + Procdump + Impfixer and finally don't needing dongle again. Nasra guys using DAT. file for 2. protection. Program coding with Miscrosoft's Foxpro. With free Defox decompiler program can full unpack all program. Just patch to checkpoint (addr = 64d8ad adress put e9 LOL) and use no limit - no nasra - no dongle shit. LOL

About Nasra's Opel pin reader, I dont know much about this program. Codecard's Opel software good for all :)

Cheers!

Why dont you post the software and crack for all then?? :)

[Meat-Head]

I have no doubt that they are reading..... Hope they take on board the suggestions ... (well some of them ) anyway...............lol

Yes, 100% discount for DK Members


Why dont you post the software and crack for all then?? :)

Make sure it's a crack* and not a keygen



*Think that's ok unless i've missunder stood the rules as normal:giveup:

[paul_12345]

About Nasra's Opel pin reader, I dont know much about this program. Codecard's Opel software good for all :)


You wouldn't know anything about the opel software cus dont think no-one who brought the interface has even got the software yet

[RussiaJester]

Why dont you post the software and crack for all then?? :)


As said as i before, i get dongle from my friend. And.. i promise to him about no public, no share (dongle image or software). Sorry about this. I want to just show "never cracking" just big mistake. I'm sure lots of peoples will be share here. :) Never say never LOL

Cheers!

[paul_12345]

As said as i before, i get dongle from my friend. And.. i promise to him about no public, no share (dongle image or software). Sorry about this. I want to just show "never cracking" just big mistake. I'm sure lots of peoples will be share here. :) Never say never LOL

Cheers!

Then can you post the software without the crack.

[Meat-Head]

Then can you post the software without the crack.

Oh and an image of the dongle, and a list of which files need 'fixing'

Thhanks

[paul_12345]

I want to just show "never cracking" just big mistake.


Maybe because no-one can crack the software when they haven't got it ;)

and anyone who's paid for the software dont want anyone else to have it for free, not even if it means they get it unlimited themselves.

[paul_12345]

Smells advertising :) Are you a member of ICC or codecard like you are claiming to senyor that he is from nasra :)

If you claim something, please improve it and share it with us.

Lets look at your post...

no way senyor wasn't working for nasratech when I metioned the fact that they spelt vauxhall with a w, he edited his post with the screenshots now showing the correct spelling, within a few hours, now with their response times it would of took days.

And I assume you have the software as you've provided someone with a incode/outcode so why dont you post the software or pm it me... unless your affiliated somehow???

[Meat-Head]

claiming to senyor that he is from nasra :).

Well if thats the case then senyor from NASA has took off

[alexics]

If you are going to use a forum as a marketing tool and have you or your mates attempt it at least be subtle. Also make sure the product is marketable. We sell hardware and software but I have never tried that trick. I actually try to help people FOR FREE. Just because I can. I offer free support and help to my own customers and it is no different to what I do here. If people have a product advertise it and test the market properly. Also listening to potential customers is a good thing too. They know best what they want and what they are willing to spend.

[obdmaster]

This is just a quick post, to see if anyone has the software working yet? I skyped nasratech, nearly a month ago showing my interest in this tool and have had no reply, bit like ecutool lol.


Soon i think i may have to buy the carprog overpriced, but working version , if nasratech doesnt get back to me soon.

If they dont reply to a possible sales lead ,wander what they would be like to answer possible gripes or teething problems.

[ironjoe]

obdmaster
I`ll give you the update information i have. As you know i "bought" this item, 2 days later the hardware arrived, but over a week later i still had not recieved the software,after plenty of shouting in this forum,they eventually gave me a refund.I then asked them to provide details for returning the hardware,to which i got an email telling me to hold on to the package and when the software was ready,i could try it,and if happy then pay for it.Best of a bad situation , anyway an email arrived today with the software link,downloaded software but it wont run.so no futher on this i`m afraid.To be honest i`ve lost all faith in this company and i`m now trying to find an alternative software.Im looking at abritrus72,really expensive but the only software out there that suits my needs.And they have a distributer in the uk.Thought about buying carprog ,but after a bad experience with one turkish company,dont fancy dealing with another.
If they send a working copy of the software,i`ll test it and report back. But to be honest i dont expect much anytime soon.
Joe

[obdmaster]

obdmaster
I`ll give you the update information i have. As you know i "bought" this item, 2 days later the hardware arrived, but over a week later i still had not recieved the software,after plenty of shouting in this forum,they eventually gave me a refund.I then asked them to provide details for returning the hardware,to which i got an email telling me to hold on to the package and when the software was ready,i could try it,and if happy then pay for it.Best of a bad situation , anyway an email arrived today with the software link,downloaded software but it wont run.so no futher on this i`m afraid.To be honest i`ve lost all faith in this company and i`m now trying to find an alternative software.Im looking at abritrus72,really expensive but the only software out there that suits my needs.And they have a distributer in the uk.Thought about buying carprog ,but after a bad experience with one turkish company,dont fancy dealing with another.
If they send a working copy of the software,i`ll test it and report back. But to be honest i dont expect much anytime soon.
Joe

Thanks for that m8, carprog is lithuanian m8, and always reply to my emails and i know people who have it and it works . Do you have price list for abritus m8, or link to distributor in uk please, and thanks for info joe, its a shame about nasratechs opel pin code reader though as looks good if they ever get it to work!!!!!!!:giveup:

[paul_12345]

@ironjoe have you got the software for us to look at

Also I was told the opel was ready and the ford was a month away till I said I've been told that people of said the software isn't available yet, and they said they would let me know once they've done it.

[ironjoe]

obd
heres the link

www.Abritus72.com (http://abritus72.com/commanderopel25.html)

total cost is just over 2 grand (uk pounds)

[ironjoe]

OBD
I ordered a carprog today,one big issue i have with it though is it does not seem to cover the corsa xep (bosch motrinic 7.6.1) ,so hope they include it soon.will let you know how i get on with it.
Joe

[obdmaster]

OBD
I ordered a carprog today,one big issue i have with it though is it does not seem to cover the corsa xep (bosch motrinic 7.6.1) ,so hope they include it soon.will let you know how i get on with it.
Joe


Did you order carprog full or just the opel pin reading things m8? I like the look of the abrites as its multi-manufacturer and has functions that others dont offer. But how do you pay and order more special functions?

Still undecided me m8, let me know how you get on with carprog joe, thanks again m8.:driver:


Getting cured of clones after fiat km tool from ecutool, still havent recieved a refund from them. That why fancy the abrites as i can add more special functions whenever i decide instead of buying clone products. Also i can jack in the overpriced snapon updates for my solus pro and get the big red piece of shit on ebay.

[JoeKiller]

You were talking other tools, i do all respect your commands but i have tried all of them. Arbitus: I got their tools and it is not working. When i told them that is not working, they said we does not support Renault, but it was the reason that i bought their tools, this was nonsense. Carprog: They sent my tool after 20 days and again i could not get it to work and ask them a technical support they said it is about interface error and please send us your device. Then i sent them, as they told me that they fix it and sent it back to me but this time it was totally broken!!! Please pay attention if they said, it will be in your hand after 20 days, i think they are doing it because they do not want anyone that requested their money back. As you know you can not open a dispute after 20 days so i could not retrieve my money back. If someone tells me that they are doing their jobs and their tools are working like a rock please come and see me, i will show you my non working tools collection :)

[obdmaster]

As ive probably said I know a guy who i buy my reset vauxhall ecus from has carprog for vauxhall ecu pin code reading. And he swears buy it says its brilliant.

Never seen it working but i trust the guy and i suppose all my ecus i buy have probably been reset using carprog, and never had any complaints m8.

Sorry to hear about your issues m8, as the commanders and carprog aint exactly cheap.

[ironjoe]

Well
First complaint coming up,as i said , i bought the carprog,i got the basic,because after the hassel before,i wanted to see the hardware first,then order up some software,i emailed them 4 days ago,no reply , posted in their forum no reply,they just wont reply.like i said before obd i was a bit warey about buying from aboad again,but stung again, i will not be buying anymore shit from anyone outside the uk again (no disrespect to our forein friends).Im gonna stick with just buying carpasses from the dealers for now.
Joe

[obdmaster]

Well
First complaint coming up,as i said , i bought the carprog,i got the basic,because after the hassel before,i wanted to see the hardware first,then order up some software,i emailed them 4 days ago,no reply , posted in their forum no reply,they just wont reply.like i said before obd i was a bit warey about buying from aboad again,but stung again, i will not be buying anymore shit from anyone outside the uk again (no disrespect to our forein friends).Im gonna stick with just buying carpasses from the dealers for now.
Joe


Sorry to hear about that m8, they replied to my emails next day and when asked a question in the forum had a reply in less than an hour. Just looked at there site and there on hols from 3rd july to 7th july. ooooooooooooppppps .


Could be worse, my m8 just paid ?4000 for a zed bull and few extras, and it doesnt recognise his zed prog, after alot of emails hes had to send it back to turkey for them to get it working.

See joe theres always someone worse off!!!!!!:musicus:

and he bought his from hickleys in the uk, but had to send it back to turkey m8.
:banghead:

[ironjoe]

Lol
Yet its hickleys i use to update my reflex,always been ok,maybe the ressesion done to many heads in.
Joe

[bkdiag]

hi iv got one paid for it on monday got it tuesday and it works every time iv done 4 corsa d pin reads and key programming and iv done 3 vectra c and works every time hope this helps:thrasher:

[ironjoe]

did you have to do the mods to the board ? the interface they sent me,has a slightly different board to the one in their mods page.That was one of the questions i`ve been trying to get the answer for.Also if you get the chance could you try it on a corsa c with xep engine ? the corsa c xep is different from corsa d xep .
Cheers Joe

[puiu]

Sorry to hear about that m8, they replied to my emails next day and when asked a question in the forum had a reply in less than an hour. Just looked at there site and there on hols from 3rd july to 7th july. ooooooooooooppppps .


Could be worse, my m8 just paid ?4000 for a zed bull and few extras, and it doesnt recognise his zed prog, after alot of emails hes had to send it back to turkey for them to get it working.

See joe theres always someone worse off!!!!!!:musicus:

and he bought his from hickleys in the uk, but had to send it back to turkey m8.
:banghead:

Hi,

i bought Carprog ,and is working great as Opel pincode reader,i have only the option for hybrid ECU - K-line,

best regards,

puiu

[ironjoe]

puiu
When did you buy your carprog,and did you do the mods to the board ?
chhers Joe

[puiu]

puiu
When did you buy your carprog,and did you do the mods to the board ?
chhers Joe
I have yhe last hardware model,no need to do the mod,
best regards,
puiu

[obdmaster]

After reading this thread, i was in 2 minds wether to buy opel pin reader by nasratech.

But after speaking to the guy on skype i went ahead, as i was impressed by his honesty and attitude. I ordered it early tues afternoon it was here wednesday morning delivered by DHL, i was having problems registering it, so straight away the guy from nasratech was on teamviewer helping me.

He got it working and installed drivers for me, upto now tested on 2 vehicles:

1999 Astra G x16xel tried to read security, said seed key ok then, nothing. Got in touch with nasratech, and he said it would be working in first update, which he has assured me is very near completion.

2001 Vectra B Z18XE1 tried to read security code, said seed key ok then, it came up with the correct security code.

So my impressions are pretty good so far, the software is very nice, and if as promised on first update most things will be working, i will be very happy with my purchase and its far cheaper than codecards carprog version for example and lists more ecus.

Overall im very happy as nasratechs support and attitude towards customers is very good. Just hope they keep theyre promise on first update, pretty sure they will.


ps: As i test more i will post my findings.

[tommyb72]

good to hear some positive results coming back. I was thinking of the one from carprog as can build what software i need.

[obdmaster]

good to hear some positive results coming back. I was thinking of the one from carprog as can build what software i need.



By the look of Nasratechs software, theyre upto all sorts, as there is loads of manufacturers, on software but theyre greyed out at the moment,only one lit at mo is opel/vauxhall. so it looks like theyre going to do most manufaturers. Theyve told me ford is next.

[tommyb72]

the option for ecu's on nasratech is it the ones listed on web site , or is there any others , ive noticed they dont have early astrag g 16szr or tigra x14xe. Did they give a release date for update so will know if problems are being solved.

[obdmaster]

the option for ecu's on nasratech is it the ones listed on web site , or is there any others , ive noticed they dont have early astrag g 16szr or tigra x14xe. Did they give a release date for update so will know if problems are being solved.


Will check for you in morning m8, about the ecus. They haven,t given a definate date just "soon" they said, typical technicians. lol.

[alexics]

the option for ecu's on nasratech is it the ones listed on web site , or is there any others , ive noticed they dont have early astrag g 16szr or tigra x14xe. Did they give a release date for update so will know if problems are being solved.

If it's the AstraG with the tms370 I don't know how they will do that as I've disassembled the rom and I can't find a way in. There is security in place but not the normal seed exchange. Once in you have the keys to the kingdom and can read or write the entire eeprom.

[obdmaster]

If it's the AstraG with the tms370 I don't know how they will do that as I've disassembled the rom and I can't find a way in. There is security in place but not the normal seed exchange. Once in you have the keys to the kingdom and can read or write the entire eeprom.


M8 the security code is read from engine ecu, not immobiliser box

[alexics]

M8 the security code is read from engine ecu, not immobiliser box

I stand corrected.

[ironjoe]

Obd
As you know,i have big problems with this company,i got refunded,but they did send me the software and told me to hold on until its ready.
The software does work on earlier models,but not on any canbus vehicles,they did send an update that now reports seed key ok,so i think they are getting nearer to completion.Software wont work on the corsa c based range. so as you said its a case of waiting on the update and see.Personally i think its a long way off,but if they get it to work,nothing out there will come close to it.It will romp the market.
Joe

[alexics]

Obd
As you know,i have big problems with this company,i got refunded,but they did send me the software and told me to hold on until its ready.
The software does work on earlier models,but not on any canbus vehicles,they did send an update that now reports seed key ok,so i think they are getting nearer to completion.Software wont work on the corsa c based range. so as you said its a case of waiting on the update and see.Personally i think its a long way off,but if they get it to work,nothing out there will come close to it.It will romp the market.
Joe

What is the issue woth the Corsa C? I haven't even looked at that.

[ironjoe]

It just wont work ,the issue is the software is not ready.
Joe

[obdmaster]

Obd
As you know,i have big problems with this company,i got refunded,but they did send me the software and told me to hold on until its ready.
The software does work on earlier models,but not on any canbus vehicles,they did send an update that now reports seed key ok,so i think they are getting nearer to completion.Software wont work on the corsa c based range. so as you said its a case of waiting on the update and see.Personally i think its a long way off,but if they get it to work,nothing out there will come close to it.It will romp the market.
Joe


Joe after reading this post, i contacted Nasratech about corsa c and they have assured me software already works on corsa c m8.

I havent tested myself yet, but as soon as i do i will post results.

[ironjoe]

I tried it on z10xe and z12xe and it did not work.If you get the chance obd will you try and let me know.
cheers Joe

[londondiagnostcs]

How successfull has anyone else found this kit, so far I can see one person has used on 2 cars and only one worked.

I know it wont be 100% but so far not looking great.

[ironjoe]

i have had success with astra g ,vectra b and zafira z-xe engines.
Joe

[obdmaster]

Just had success with Nasratech opel pin reader on 2004 meriva Z16XE.

Nasratech have also sent me list of models covered and working at the moment its attached to thread.

[ironjoe]

obd
Have you got the update yet ?
cheers Joe

[obdmaster]

obd
Have you got the update yet ?
cheers Joe



No m8, no update as yet .The list posted it was nasratech has sent me, that the opel pin reader does at the moment. Ive asked for an ecu list that it will be able to do after first update, so as soon as i get that i will also post .

[obdmaster]

Here is nasratechs list after update, ive been told it will be released monday. I will post my findings asap.

[obdmaster]

Just used it to read security code of donor ecu on car and reset unit on car. Again it was a vectra B z18xe.


Had to use opcom to program it but the guys at nasratech have assured me, after getting ALL security codes working, they will be getting the immo functions fully functional also.


Happy days.

[vauxbreaker]

hi can you please do some work on a transponder box with this equiptment, like read a security code off one or reset one ready to be used as i am thinking of buying this equiptment but dont know if you can read codes from the immo box but am sure that they can be reset without having the original code

many thanks

[obdmaster]

My opel pin reader by nasratech has just been updated not tested any yet myself but will keep you all informed heres the list from them:

New supported functions with the first update:

Total Odometer Counter,
Total Engine Running Time,
Change Total Odometer Counter for Can based cars


New Supported Models with the first update:

AGILA Z10XE Motronic M1.5.5 KWP2000
AGILA Z10XEP Motronic 7.6.1 KWP2000
AGILA Z12XE Motronic M1.5.5 KWP2000
AGILA Z12XEP Motronic 7.6.1 KWP2000
AGILA Z13DT Multijet 6JO KWP2000
ASTRA-F X16XEL Multec (F) KWP2000
ASTRA-G Y17DT HDRC KWP2000
ASTRA-G Y17DIT HDRC KWP2000
ASTRA-G Z12XE Multec S (F) KWP2000
ASTRA-G Z14XE Multec S (F) KWP2000
ASTRA-G Z16SE Multec S (F) KWP2000
ASTRA-G Z16XE Multec S (F) KWP2000
ASTRA-G Z18XE Simtec 71 KWP2000
ASTRA-G Z20LET Motronic M1.5.5 KWP2000
ASTRA-H Z12XEP Motronic 7.6.1 CAN2000
ASTRA-H Z14XEL Motronic 7.6.1 CAN2000
ASTRA-H Z14XEP Motronic 7.6.1 CAN2000
ASTRA-H Z16LET Motronic 7.6.2 CAN2000
ASTRA-H Z19DT EDC 16C9 CAN2000
ASTRA-H Z19DTL EDC 16C9 CAN2000
ASTRA-H Z20LEH Motronic 7.6.1 CAN2000
ASTRA-H Z20LEL Motronic 7.6.1 CAN2000
ASTRA-H Z20LER Motronic 7.6.1 CAN2000
CORSA-C Y17DT HDRC KWP2000
CORSA-C Y17DTL HDRC KWP2000
CORSA-C Z10XE Motronic M1.5.5 KWP2000
CORSA-C Z10XEP Motronic 7.6.1 KWP2000
CORSA-C Z12XE Motronic M1.5.5 KWP2000
CORSA-C Z12XEP Motronic 7.6.1 KWP2000
CORSA-C Z13DT Multijet 6JO KWP2000
CORSA-C Z14XE Motronic M1.5.5 KWP2000
CORSA-C Z14XEP Motronic 7.6.1 KWP2000
CORSA-C Z16SE Multec S (F) KWP2000
CORSA-C Z18XE Simtec 71 KWP2000
CORSA-D Z10XEP Motronic 7.6.1 CAN2000
CORSA-D Z12XEP Motronic 7.6.1 CAN2000
CORSA-D Z14XEP Motronic 7.6.1 CAN2000
CORSA-D Z16LEL Motronic 7.6.3 CAN2000
CORSA-D Z16LER Motronic 7.6.3 CAN2000
MERIVA Y17DT HDRC KWP2000
MERIVA Y17DTL HDRC KWP2000
MERIVA Z13DT Multijet 6JO KWP2000
MERIVA Z13DTJ Multijet 6JO KWP2000
MERIVA Z14XEP Motronic 7.6.1 KWP2000
MERIVA Z16LET Motronic 7.6.2 KWP2000
MERIVA Z16SE Multec S (F) KWP2000
MERIVA Z16XE Multec S (F) KWP2000
MERIVA Z18XE Simtec 71 KWP2000
SPEEDSTER Z20LET Motronic M1.5.5 KWP2000
TIGRA-B Z14XEP Motronic 7.6.1 CAN2000
VECTRA-B X16XEL Multec (F) KWP2000
VECTRA-B Z16XE Multec S (F) KWP2000
VECTRA-B Z18XE Simtec 71 KWP2000
VECTRA-C Z16XE Multec S (F) CAN2000
VECTRA-C Z19DT EDC 16C9 CAN2000
VECTRA-C Z19DTL EDC 16C9 CAN2000
ZAFIRA X16XEL Multec (F) KWP2000
ZAFIRA Z16XE Multec S (F) KWP2000
ZAFIRA Z18XE Simtec 71 KWP2000
ZAFIRA Z20LET Motronic M1.5.5 KWP2000
ZAFIRA-B Z19DT EDC 16C9 CAN2000
ZAFIRA-B Z19DTL EDC 16C9 CAN2000
ZAFIRA-B Z20LEH Motronic 7.6.1 CAN2000
ZAFIRA-B Z20LEL Motronic 7.6.1 CAN2000
ZAFIRA-B Z20LER Motronic 7.6.1 CAN2000
INSIGNIA A20DTC Bosch EDC17-05 CAN2000
INSIGNIA A20DTJ Bosch EDC17-05 CAN2000
INSIGNIA A20DTH Bosch EDC17-05 CAN2000

[tommyb72]

I tried on a 2007 Corsa'D Engine code Z12XEP got a few errors when trying to read pin but after a few trys it read pin ok.
It seemed to work better by reading DTC first then Read pin.
Nasratech are looking into the error.
But looking good so far. will test more and post my outcome.

[alexics]

Hopefully by having seen the responses on the forum their customer service will improve.

[obdmaster]

Hopefully by having seen the responses on the forum their customer service will improve.


In my expereience, ther customer service towards me, has been excellent. Had a few small problems that they where straight on teamviewer trying to solve. But hopefully after the update, most small glitches have been resolved, im looking forward to testing and hopefully posting my positive findings.

[ironjoe]

sorted Obd , just did as you said,updated right away.
cheers Joe

[obdmaster]

sorted Obd , just did as you said,updated right away.
cheers Joe




Let me know your findings after update m8:smokin:

[ironjoe]

Tried for over 40 minutes on a corsa D 2009 z12xep with no success,could`nt try any longer as i had to get to my next job
Joe

[tommyb72]

What was happening when you tried to read pin . were you getting an error on screen.
Did you try reading DTC first then try to read pin in ecm.

Oh and did you have a hassle getting the plug to fit the 16pin connector

[obdmaster]

Have you both noticed, you have to be connected to internet now to read pin. I was doin z18xe and it said check internet connection. So i had to connect to internet before it would read pin.:

[tommyb72]

obdmaster if your talking about online at the corner, Im sure it means online with the ecu, i.e commmunicating with it.
U press that to get comms with ecu

[ironjoe]

Yes i did try checking the dtc first tommy after reading your earlier post.There where several errors, no interface,unhandled exception, com port 13 not found.Im actually getting less from it now than i did before the update.
Joe

[obdmaster]

obdmaster if your talking about online at the corner, Im sure it means online with the ecu, i.e commmunicating with it.
U press that to get comms with ecu


Yes m8, im aware of that m8, it connected to ecu, then when i went to "read pin code" then hit "send". it said "check internet connection".

so i connected and it read pin code, have you guys not come across this? Bit funny.:smokin:

[tommyb72]

i was actually connected online at time so didnt come across it, Ive just been informed that the software will ask for internet connection 1st attemp then you can read pin offline after that

[obdmaster]

Also i read pin code and reset a z10xe ecu on bench today, it took few attempts, it kept saying "wrong ecu selection".


But it did read pin code and reset ecu.

So i am happy.

[nutloose]

when you say you did it on the bench, did you connect only the ecu or did you have a bench rig with CIM and UEC too?
I know that the original nasratech inteface came with a breakout lead but I didn't think the new version did, ie 16 pin only

[obdmaster]

when you say you did it on the bench, did you connect only the ecu or did you have a bench rig with CIM and UEC too?
I know that the original nasratech inteface came with a breakout lead but I didn't think the new version did, ie 16 pin only


just ecu connected m8, i have a blue point can test lead which is a breakout box with fancy lights around the wholes that flash as it communicates.

It was like a bloody disco in my unit. lol

[nutloose]

"It was like a bloody disco in my unit."

I usually wear overalls, but if you have to wear flares and a kipper tie or tank top I suppose you can.:rock:


I suppose the lead I use on the bench will do just fine then, Thanks

[ironjoe]

I hear through the grapevine there is a new op-com being released soon and that it will read most pin codes.

[z786]

I hear through the grapevine there is a new op-com being released soon and that it will read most pin codes.

any web links to that?

[obdmaster]

I hear through the grapevine there is a new op-com being released soon and that it will read most pin codes.



I too have heard that my m8, ive heard pin code exctracted will be encrypted then you must go online to get it decrypted.

Seems bit laborious to me, but we will wait and see.

[drakov]

any web links to that?

http://www.opcom-diagnose.de/version_advanced.html

[tommyb72]

Tried the Software Again on Corsa'D without Internet connection,No luck
Spoke to Narsatech and I must have got mixed up on previous post, they said that you can read offline after 1st go. But this will only be available after the Second Update.Apparently the update will be this week!!!

[obdmaster]

Tried the Software Again on Corsa'D without Internet connection,No luck
Spoke to Narsatech and I must have got mixed up on previous post, they said that you can read offline after 1st go. But this will only be available after the Second Update.Apparently the update will be this week!!!


Thought that was the case m8, did it read with internet connection?

[ironjoe]

I have to connect to internet all the time,but the program seems to respond a lot quicker,getting a bit more success with it now,tried a psg 16 pump the other day with no success though.But overall its looking a bit better now.
Joe

[tommyb72]

Thought that was the case m8, did it read with internet connection?
Didnt have internet access, So no answer for that. ironjoe apparently they working on the psg16 system.

[ironjoe]

No tommy tried one last night,say`s "seed key ok" then instead of the code popping up, it say`s "will be updated". Itook a screenshot of it,but cant seem to upload it.
Joe

[tommyb72]

No tommy tried one last night,say`s "seed key ok" then instead of the code popping up, it say`s "will be updated". Itook a screenshot of it,but cant seem to upload it.
Joe
Hi mate, I mean nasratech are working on the psg 16 system, not that the tool is working on psg 16.

[obdmaster]

Cryptowork have just informed me another update has been released.

Heres what they sent me.

"second update has been released. We solved the internet issue with that one and also the reset sec code for can based cars function has been added.
the last thing is about time out protection for crackers has been added.

You will see the current version at the below next to the date and clock as 1.1.12 when the main screen came after you clicked vauxhall or opel icon."

So you just start software while connected to internet, havent done it myself as busy busy. But will do later or in morning.


Much thanks Cryptowork and keep those updates coming.

[ironjoe]

Did you get the update obd ? and if so did it sort the problem with the internet connection .
Joe

[obdmaster]

did update this morning m8, not used it today though , sorry joe

[tommyb72]

Ive updated mine but not tried out the internet issue yet. But according to nasratech to have to open program whilst connected to internet. then disconnect and you can then use if no internet access, but program must still be running.

The best option would be use of mobile broadband to have access when needed.

[obdmaster]

heres some screenshots of opel pin reader in action on both can and kwp, just thought id share with all DK members.

[tommyb72]

Tested the offline usage on a Corsa D i have access to.

You have to load program fully whilst connected to internet,with interface connected and dongle.

I disabled intenet then disconnected interface then went out to car and read pin in ecm ok.
the security dongle must be connected at all times, i tried removing this and going to car but didnt work for me.

Its a lot of messing about, So as said previous, Mobile broadband looks like the option to run with this tool.

[ironjoe]

Unless like me ,you use a toughbook that only has 2 usb`s. I`ve had mobile internet in the van for over a year as i do a lot of sps programming,but this is a bit of a pain.Looks good software though. I`ve ended up buying some software from carprog,this works flawlesy ,but a lot more expensive,but i`ve spent hundreds on carpasses over the last few months so overall i`ve saved some pounds,i dont know if the internet thing is a security feature,but its killing the product a bit,not everybody has an internet connection,and even if you do you may not be in an area or situation where a connection is possible.
Joe

[tommyb72]

yip i use a cf-18 and only has 2 usb ports. I would have to get a usb hub to run, even more hassle,
The tool is getting better but the internet issue lets the tool down, and according to nasratech it will never be able to work full offline.
So heres hoping nothing happens with the company or the tool will be rendered useless.

We all know Security is a must for these companys and thats why they have a dongle for this, but you would think if vauxcom can read security pin on cosra c. meriva and tigra b. without internet usage this tool should be able to do so aswell.

[ironjoe]

I think the new vaux-com thats coming out is going to read the pincodes,if it does it will be a top seller.
Joe
ps .Tommy i tried a usb hub but the tool does not work with it,though it might be the hub i`m using.

[Pete M]

These cards work perfectly with all software on CF18/19

Nice thing is you can close the door when not in use

usb inside items - Get great deals on Computing, Consumer Electronics items on eBay UK! (http://shop.ebay.co.uk/i.html?_kw=usb&_kw=inside)

Peter

[tommyb72]

Ironjoe is it the interface that has problems with usb hub, or the dongle.

[ironjoe]

both tommy,can plug one in at a time but not both together.

[CryptoWork]

Ive updated mine but not tried out the internet issue yet. But according to nasratech to have to open program whilst connected to internet. then disconnect and you can then use if no internet access, but program must still be running.

The best option would be use of mobile broadband to have access when needed.


Hello Everyone,

The internet issue has been fixed, you do not need to worry about it anymore.

Best regards,

CryptoWork Team

[vauxbreaker]

what about if you need to use this on more than 1 laptop? as with other software available you can have it installed on at least 2 laptops as lond as you have the hardware when you need to use it, so you are not stuck to using just one persons computer to do the job?

[CryptoWork]

Hello Vauxbreaker,

The users are allowed to make one installation and actually the problem is about the software. It has a unique license file which is assigned for one computer that is why the users can install it only one. If they want to install it to another, they will need to have 2nd license for 2nd computer which is required extra cost but not a big deal. Even if we allowed them to install it to 2nd one with the same license, they will be able to reactivate the software on just one computer.

I hope, this information helps.

Best regards,

CryptoWork Team

[squirrelbandy]

ok i can confirm my opel kit doesnt need internet now i have not hardly used this tool as for some reason the jobs have not been there for me but i did Astra H yesterday 1.6 and worked perfect.

[z786]

has any1 seen the price of this pin reader?
kinda had a big jump from 800usd to 1250 eur

[obdmaster]

has any1 seen the price of this pin reader?
kinda had a big jump from 800usd to 1250 eur

Yes my m8, z786. it did say though on nasratech website the 800usd was an introductory price, and to be honest it was work in progress when i bought it. But after speaking with cryptowork on skype i believed in the company. And now im very glad i did as it seems to be the best there is, and the 1250euro although alot more expensive that it was . Seems to me to be justified as it does more than any other opel pin reader there is and its still cheaper than its compettitors.

I think i got a bargain at the old 800usd price.:eating:

[z786]

you reckon they gna have a "sale" on? lol
last year codeacard had a 10% sale on xmas
heres hoping they have 1 again :D

[Opel Tech2]

Hi everyone!
Prompt who real uses the data by device?NASRATECH (http://www.nasratech.com/updates.php)
Supports all?

[obdmaster]

Hi everyone!
Prompt who real uses the data by device?NASRATECH (http://www.nasratech.com/updates.php)
Supports all?


Yes i use it, there was a few small issues when i first bought it, but now seems to work very well with updates nasratech have released last week read an 2006 Astra H z14xep no problems whatsoever. Now im very happy with it:champions:

[ironjoe]

Obd
Have you tried it on psg 16 yet
cheers Joe

[obdmaster]

Obd
Have you tried it on psg 16 yet
cheers Joe


No m8, i havent im not a locksmith you see, so i dont use it everyday but i need it for replacing ecu,s , cim units etc. And the way vauxhalls are going you will need security code to replace just about anything on the vehicle very soon.:eek:

But if i get one in i will try and let you know Ironjoe m8.:wavey:

[vauxbreaker]

obd
have you read any x18xe1's yet as they told me it will be in the next update over a month ago

cheers

[obdmaster]

obd
have you read any x18xe1's yet as they told me it will be in the next update over a month ago

cheers


No m8, read loads of z18xe though

[vauxbreaker]

yeah same here

cheers anyway

[ironjoe]

that was my main gripe with the tool,i bought it mainly for the psg 16 pumps,so the easy option for me was the carprog with the software fo the pumps,so i was just wondering if it did it yet as they are saying.
Joe

[Opel Tech2]

With many thanks for answer.
Excuse me for translation.

[obdmaster]

Tried x18e1 today m8, and "seed key is not ok", your right m8, it doesnt work on that.:eek:

[vauxbreaker]

i know i'v tried it on a few cars, it is good software and customer service is great but just want it to be complete now as its been months since i bought it, but i also bought carprog so i use that for the x18xe1's but was not cheap

cheers

[ironjoe]

not cheap vauxbreaker i agree,but it does as it says.
Joe
better quality too

[obdmaster]

I,ve heard a rumour , though that codecard arent goin to update there opel pin reader anymore, thats it from them on that project.

I was told this from someone who has used carprog for few years to read opel pin codes. And has all the opel pin reading stuff from them, he also has the nasratech version.:eek:

[tommyb72]

I tried mine on a vectra B' today year 2000 engine code x20xev, seed key ok but got waiting on update.


looks like doesnt do this system yet. but hopefully an update will sort this if any soon.

[obdmaster]

I tried mine on a vectra B' today year 2000 engine code x20xev, seed key ok but got waiting on update.


looks like doesnt do this system yet. but hopefully an update will sort this if any soon.


Isnt an X20XEV, vectra B, immobiliser 1, if so the pin isnt stored in engine ecu. Pretty sure they are as ive programmed in new engine ecu on that system and there is no need for pin to program ecu , just needed to program keys into immobiliser unit.

Or are they 2 sytems, both with engine code X20XEV? HMMMMMMMMM you got me thinking now.

[ironjoe]

immo 2 obd

[ironjoe]

http://www.opcom-diagnose.de/pdf/OP-COM%20Advanced.pdf
guys might be interested in this tool,coming out soon,only these guys wait till its ready before they release their stuff.And it will do what is says.

[vauxbreaker]

yeah i asked about that last week and here is the reply
VAUX-COM advanced will be released as a future version, and will run alongside the existing version as standard and advanced.
It won't be a free upgrade but the upgrade price will be the same or less than the difference in price between the standard and advanced, so there is no penalty for waiting or buying now and upgrading later when it is released (there is no fixed date for release yet)

looks good

regards daryl

http://www.opcom-diagnose.de/pdf/OP-COM%20Advanced.pdf
guys might be interested in this tool,coming out soon,only these guys wait till its ready before they release their stuff.And it will do what is says.

[astogar]

Hallo,
does anyone know anything about this device?
Op-Com OPCOM100315e

[ironjoe]

if this is the advance ,it will be released soon,and unlike some other products it will do as it says,without getting customers to test it,or selling it to you months before the software is ready.

[fes_786]

but it will be released to trade only

[ironjoe]

yes trade only

[vinicio1716]

Hi I bought uninvestigated Security Code Reading Software Opel and Ford NASRATECH but reading this post on the interface I have a little fear will not work if I could help them to actually work as those who have worked with this interface.

thank you very much for your help

[obdmaster]

Hi I bought uninvestigated Security Code Reading Software Opel and Ford NASRATECH but reading this post on the interface I have a little fear will not work if I could help them to actually work as those who have worked with this interface.

thank you very much for your help



Dont worry m8, i can vouch that the opel part seems to work quite well nowadays.

[tommyb72]

yip works on the ones listed on updated list but thats a fraction on what they claimed it would do at the start. Ive tried on many motors and its bounced,

[paul_12345]

I was told this via email

Opel is included as full version but we have some missing updates which is related to simtec ECUs and reading the pincodes from info display and key programming functions but we will be covering them soon and release a free updates for them

[stompa]

learn to solder and read eeprom guys, is much cheaper and better,

[vinicio1716]

Thanks all for your comments now I have to wait the arrival of my interface that is already under way to fill my needs I hope to achieve about opel and ford. when you start doing the tests will comment how it goes greetings.

[nutloose]

I find that it still struggles (cannot do) with CAN modules especially on the bench. (K line ecu's seem fine.)

z12xep z14xep etc no good
z10xe,z12xe etc always good

vaux com and tech 2 both work fine in same setup.

the original nasratech advert promised to decode on the bench but things haven't improved since then

[vauxbreaker]

I find that it still struggles (cannot do) with CAN modules especially on the bench. (K line ecu's seem fine.)

z12xep z14xep etc no good
z10xe,z12xe etc always good

vaux com and tech 2 both work fine in same setup.

the original nasratech advert promised to decode on the bench but things haven't improved since then


we done corsa d z14xep 2 days ago after contacting them via msn and it was just a software issue, they are fixing it on the next update, yes it can be annoying when it wont do the car you are trying to work on, and hold you back from your work but there cust service is great and will help you out whenever possable, where as carprog cust service is utter rubbish

cheers

[CryptoWork]

Dear Forum members,

In addition and correction for vauxbreaker post, it was Z12XEP as we do not have any issue with Z14XEP, please see the attached pictures.

Again, we are always ready to help to our customers if there is any issue with the software.

Best regards,

CryptoWork Team

[nutloose]

Z12XEP and Z14XEP use the same hardware. I had to get the code from the dealer before I re-set it with vaux com and programmed it with Tech2. I used the wiring diagram from carprog, on the bench. If the cryptowork pincode reader should be wired differently perhaps they should post it

[paul_12345]

When is it going to support reading pin from the dash?

Not brilliant that the orv clone can now read pincode from cluster ok on a corsa d and this can't

[CryptoWork]

Z12XEP and Z14XEP use the same hardware. I had to get the code from the dealer before I re-set it with vaux com and programmed it with Tech2. I used the wiring diagram from carprog, on the bench. If the cryptowork pincode reader should be wired differently perhaps they should post it

You do not have to wire it differently and if you had to, we must have told about that.


When is it going to support reading pin from the dash?

We keep updating software so the other missing stuff will be covered with the following updates.

[nutloose]

on a positive note.... at least the registration process has been reliable for the past few months

[tommyb72]

Why dont they have a list of Ecus on there Web site that it actually does work on upto date, then keep amending as the proceed other than the list that is there which isnt any good.
I got pdf of latest ones via skype but only when i mentioned yet again it wouldnt do what was covered on web site, but lost pdf now.

[CryptoWork]

Hi Tommy,

Here is the latest coverage list attached as a pdf file.


Best regards,

CryptoWork Team

[vinicio1716]

Good day with respect to the interface for opel I think for those who want to buy for subamerica when you can not work because they have other engines.

http://www.mediafire.com/imageview.php?quickkey=mwwghwhd0hb0hgd&thumb=4

http://www.mediafire.com/imageview.php?quickkey=2pxbuaxwan5axd1&thumb=4
http://www.mediafire.com/imageview.php?quickkey=2pxbuaxwan5axd1&thumb=4http://www.mediafire.com/imageview.php?quickkey=mwwghwhd0hb0hgd&thumb=4

Talk to the people of cryptowork will try to help with software

[tommyb72]

Hi Tommy,

Here is the latest coverage list attached as a pdf file.


Best regards,

CryptoWork Team

Thanks for the list but this should be attached onto your web page to let others know what its actually covering, instead of buying the tool and having to try on car before finding out it wont read pin. On pdf it says other simtec systems will be covered in next update. when will this be. as the wait for the tool to be up to scratch is long winded. You are moving onto other manufactures to retrieve pin before you complete the ones already working on. I bought tool as others did before completed but will this one even be completed and do what you claimed at the start.

[ironjoe]

I know 7 people with this tool ,and all agree,its shit,said a year ago this company were rouges,and stand by it,if they claim that its doing much more than it actually is doing,then the mods should boot their arses of this forum,they are using this as a platform for their own financial benefits.
Joe

[gyalog_kakkuk]

Hi all menbers.
I have used the program. I think it fully working.

Krisztian

[tommyb72]

Hi all menbers.
I have used the program. I think it fully working.

Krisztian

Obviously you havent tried it out on many vauxhalls then as ive had it bounce of more cars than a rubber ball.

The tool is far from fully working. Ask others on the forum that have it. If I use a tool and it does a fair percentage of what it claims then i give reasonable feedback if the tool doesnt then i speak against it.
I bought it cheap before it was completed but that was many months ago, and its basically not got any better since.

If Nasratech concentrate on the tools and finish them, then they will be great tools. but they seem to do part here part there. then move onto something else.

[ironjoe]

thats what im talking about tommy all these 'plants' coming in saying its working 100%, so have they got something different from the other guys?,no company is more interested in selling,than trying to get the thing working properly.
joe

[vauxbreaker]

its true this is not 100% working but fot the proce i paid it does just enough for me to be satisfied, but i will be happy when the update finnaly comes out to make it do all what its ment to do, i have always found that if i have a problem with device i can get a hold of them on msm and usually get it sorted within the hour if its something the device is capable of decoding

cheers

[tommyb72]

its true this is not 100% working but fot the proce i paid it does just enough for me to be satisfied, but i will be happy when the update finnaly comes out to make it do all what its ment to do, i have always found that if i have a problem with device i can get a hold of them on msm and usually get it sorted within the hour if its something the device is capable of decoding

cheers

We will all be happy when they update it to do what they claimed.but this will probably never happen. They Read these posts and have heard the comments from the people using there tools.

Its always will be added next update then next again then next.
So I amongst others are asking when do you actually think you will get round to completing this. Instead of trying to sell other tools claiming they do the same also.

[obdmaster]

100% agree ive had this tool over 12 months, and it still doesnt do what they claimed 12 months ago.



Dont get me wrong im happy with it, and what it does now it does well.

But it seems to be an unfinished project

[vauxbreaker]

We will all be happy when they update it to do what they claimed.but this will probably never happen. They Read these posts and have heard the comments from the people using there tools.

Its always will be added next update then next again then next.
So I amongst others are asking when do you actually think you will get round to completing this. Instead of trying to sell other tools claiming they do the same also.

i have been told that the next update ius the 1st of next month and i am hoping that they will honour that

cheers

[tommyb72]

i have been told that the next update ius the 1st of next month and i am hoping that they will honour that

cheers

Yes they will probably do an update next month but the amount added in that update will be minimum, If youve noticed theres not been a reply from NASRATECH on my post about when will it be finished. Thats probably because they cant finish the tool. So move onto an easier Manufacture to bring the money in from all the promises.

[tommyb72]

thought id bump this up to see if nasratech are going to answer the questions. If they dont then each to there own about there products!

[artur13]

how to read immo pin code from opel tigra from dump file with which soft

[robert81]

I read all 12 pages. I'm very experinced in VAG keys etc and want to move on with other brands. what tool would you judge as best to read pin codes for GM?
few been mentioned but not sure which are best. looking forward for your reply. Robert

[kaToo]

Opel software from abritus "AVDI"
it is expensive but it is very good ...

THANKS

[alexics]

It is quite disappointing that the issues have not been resolved.

[obdmaster]

Opel software from abritus "AVDI"
it is expensive but it is very good ...

THANKS

100% agree m8, i have both abritus and nasratech versions.

And the Abritus versions is smoother and always works first time.

Dont get me wrong though, i certainly wont be throwing or giving away my nasratech interface either.lol

[tommyb72]

Ive never used Abritus, But The feedback ive heard doesnt do the tool any bad.

On the other hand with Nasratechs unit, Its Hyped up sales bullshit
very unreliable, The progress with the tool is that slow its probably stopped. Although i jumped in early to get a good price. Wish i hadn't now. And would advise anyone against buying there products. On the belief that it claims to do what it says. BEWARE!

[Loaded]

"Again, we are always ready to help to our customers if there is any issue with the software."

Yeah, whatever !

"We will have 2010 Insignia sorted within two weeks" - they tell us that last year.

Bad company, bad ethics, don't buy.

[tommyb72]

Yet another Vauxhall this didnt read pin from yesterday. I didnt expext it to as it wasnt on there list of what they say it does.
But its on there web site for coming soon Astra G x14xe.

When soon . When is the tool going to get the attention to be finished. I spoke to one of them on skype and they say there concentrating on Fiat tool at moment and only waiting on Vectra C and Corsa D to finalise and tool will be complete

Yeah right ' Far from it ' How about some answers on the open Forum ., You are reading these posts but not willing to Answer any.

[vauxbreaker]

Edit. I have made a new thread up that covers my problems with Cryptowork.