vw pin code from dump please

[obdmaster]

Here is tms370 dump from vw transporter im*o box, 6h0 953 257, siemens 5wk4 774.

im*o reader says code is 0

Am i missing something?:giveup:

[umoussa]

yes

the dump :)

[obdmaster]

yes

the dump :)


Was just on with uploading m8. LOL

[ramhalo]

hi your pin code is 01529...

[obdmaster]

hi your pin code is 01529...


Pin is accepted, thanks.
BUT I have a problem key will not code in. Customer got new key cut from vw, which came with transponder inside, i coded it using mvp worked then lost it, tried coding it using vagcom the same tried coding it using vag commander the same. We have an old box and key off same model vehicle so going to put dump on that box to try as anyone got any other ideas

Much thanks in advance as always:giveup:


P.s this has come about from guy losing his key

[tachonow]

Pin is accepted, thanks.
BUT I have a problem key will not code in. Customer got new key cut from vw, which came with transponder inside, i coded it using mvp worked then lost it, tried coding it using vagcom the same tried coding it using vag commander the same. We have an old box and key off same model vehicle so going to put dump on that box to try as anyone got any other ideas

Much thanks in advance as always:giveup:


P.s this has come about from guy losing his key
Take out the chip from the old key an put it on the new key then programm it with the loggin from original box.

[obdmaster]

Take out the chip from the old key an put it on the new key then programm it with the loggin from original box.


Tried programming old key from a donor vehicle to van but it wont have that also. Tried another aerial, , bit lost now m8

[andresfn18]

Whith a new transponder, tp14 for vw :top:

[obdmaster]

Lupu sandu the man, helped me to make key using GAMBIT, then i put dump back onto tms370 as i lost all keys trying to program in new transponder. Van is now a runner. BIG thanks to lupu sandu