clio 1.5dci ecu repair dump

[jjrp255630]

hi, i have a clio 1.5dci year 2008, original dump its corrupt, i get another dump but i need to im*o code on him, can some one help?

ps: eeprom its a 95160

[joubliss]

this one is with immo off.

[jjrp255630]

this one is with im*o off.

many thanks friend, can you also calculate pin code and key code to program it?

regards

[joubliss]

many thanks friend, can you also calculate pin code and key code to program it?

regards

not important, if all are ok (uch+key) just program this Dump with immo off into Ecu and star the car, the code pin will be programmed into the ecu automaticly.
good luck

[jjrp255630]

not important, if all are ok (uch+key) just program this Dump with im*o off into Ecu and star the car, the code pin will be programmed into the ecu automaticly.
good luck

hi, not ptogramed automaticly, i will need pin code and key code


regards

[joubliss]

hi, not ptogramed automaticly, i will need pin code and key code


regards

if the keys and uch are from the same car, u have just to virgin the ecu and start the car, the pin will be programmed into the ecu automaticly. be sure 100%

[jjrp255630]

if the keys and uch are from the same car, u have just to virgin the ecu and start the car, the pin will be programmed into the ecu automaticly. be sure 100%

its teh same key and UCH, when i try to start the car, the immo light stays switch on, and car dont start

regards

[jjrp255630]

hi, reference of ecu are the same, but i check that dumps are totaly diferents, can we put this new ecu in car?

[greg6969]

hi, please clear the Clio 1.5dci 95160

[-fabryka-]

Clio 3 2009 1,5 dci
I had programed one new key to UCH, remote is working correct but immo light is on (not blinkin) and can't start engine. Prabobly while programming key UCH eeprom was damaged and lost synchro with ECU. I can't repair original file. Can anyboby help me? I was trying to program it one more time witch CLIP but dealer can't calculate code from 6 windows of CLIP prabobly becouse of damaged file in UCH.

[jjrp255630]

you have key code form UCH? its a eeprom 93c56

[-fabryka-]

it's new clio 3 eeprom is 93160 and I don't have pin, programming by CLIP is 'on line' but now codes not match correctly

[fcan]

clio III dcm1.2 ST10F280 immo off pls

[fcan]

clio III dcm1.2 ST10F280 immo off pls

immo off or virgin dump