Belfast

[potsfb]

I have lost all channels on my s v super on vm.
No cards have been sent as far as I know.
Anybody any advice on how to get them back.
Cheers.

[sparky208]

I have lost all channels on my s v super on vm.
No cards have been sent as far as I know.
Anybody any advice on how to get them back.
Cheers.just do a factory reset then auto rescan and all is good again

[cheeba]

just do a factory reset then auto rescan and all is good again


not working for me friend in north belfast area:(

[sparky208]

not working for me friend in north belfast area:(
after you have done a factory reset and auto scan go to menu put in 1570 then switch on emu and make sure its on ntl i just done mine works a treat

[cheeba]

after you have done a factory reset and auto scan go to menu put in 1570 then switch on emu and make sure its on ntl i just done mine works a treat

sorry mate I have the boxpvr emu is on (parental control-press I then 2007) keycode is on still no channels:(

[lonedeath]

sorry mate I have the boxpvr emu is on (parental control-press I then 2007) keycode is on still no channels:(

Same for me on box super 4!

[sparky208]

sorry mate I have the boxpvr emu is on (parental control-press I then 2007) keycode is on still no channels:(are you geting no channels at all bbc1 anything

[BikerGuy]

Worked a treat..Belfast...Thank You!!!! :top:

[mehall77]

hi just done factory reset all channels back Belfast

[lonedeath]

Ok, on my BoxSuper4USB I have done a factory reset, enable keycode on in 1570 menu, automatic scan, select NTL, still no channels found.

Anyone an idea if im missing something?

Cheers

[cheeba]

are you geting no channels at all bbc1 anything

no mate not getting any channels only finding a few hd channels think i`ll reflash to see if that helps

[lonedeath]

Ok got my channels back, for some reason when doing an auto scan I had to select CHORUS as opposed to NTL which usually works, oh well channels back!

[belfastdaren]

i been using chorus for a while all channels were working , reset and scanned this morn and got all channels back, this afternoon channels gone again and when i scan i only pick up a few i have tried all fron ntl to chorus/cork but still no joy ;-(

[cheeba]

Ok got my channels back, for some reason when doing an auto scan I had to select CHORUS as opposed to NTL which usually works, oh well channels back!

strange but i`ll give that a go cheers:)

[potsfb]

Ok, on my BoxSuper4USB I have done a factory reset, enable keycode on in 1570 menu, automatic scan, select NTL, still no channels found.

Anyone an idea if im missing something?

Cheers

scan on chorus cork not ntl.

[leeroy 25]

hi, lost all channels and did the normal, but had 2 change 2 chorus cork . in automatic scan picks up all channels when i exit freeview channels all work, slysp*rts 1, slym*vies premier+1 and the dirt channels all other channels still giving system info but no pic or sound, can anyone point me in the right direction.

any1 that could help would sort out a massive headache

[Muage]

I have a starview 4 usb in belfast and only get channels when scanning chorus , nothing on NTL, i can get sky sports 1 but not 2,3 or 4 plus a lot of other channels are just blank, even if they are on the EPG.

HELP!!!

[Muage]

UPDATE

:bounce:FIXED:bounce:

flashed to new firmware 1.12 sorted my problem and I now have all channels back. my firmware was at 1.07 :bounce:

[wobblybox]

Hi all, I too am from Belfast and have lost my channels, I have the box super 3, I lost them on the 26th and apparently Virgin changed something around then. (I am not tech savvy). I have scanned chorus, ntl, tw, chorus cork. I get channels on all them bar ntl??? when the scan finishes and I exit I have a random channel ie at the races, disney etc but when I go to bbc it says channel changed please wait for saving then the screen goes blank.

Am I right in thinking typing 0000 does a factory reset? I have API version 8.04e-E, Boot ver: 8.0 22 dec 2008.

Any help would be greatly appreciated

[wobblybox]

UPDATE

:bounce:FIXED:bounce:

flashed to new firmware 1.12 sorted my problem and I now have all channels back. my firmware was at 1.07 :bounce:


Where did you get above download?

[larryoke]

Where did you get above download?
The firmware above is for the sv4 usb you have a sv3!!! the latest firmware is in the red stickies at the top of the sv page.

[belfastdaren]

my starview 4 is now working in belfast wouldnt pick up channels or channel were a blank screen with emu turned on let it 24 hour turned it on i didnt have to rescan or anything :-)

[lappy6774]

Done a factory reset then scan and got all channels back except sky sports 1 I have the Box Super

Anyone help

[mickmc68]

Done a factory reset then scan and got all channels back except sky sports 1 I have the Box Super

Anyone help

hi m8 if fx is there instead just delete it and sports 1 will come back in its place

mickmc

[boomer39]

Where did you get above download?
have you done, menu, 1570, emu on????

[butmeisters]

UPDATE

:bounce:FIXED:bounce:

flashed to new firmware 1.12 sorted my problem and I now have all channels back. my firmware was at 1.07 :bounce:


cheers mate got it sorted with the new firmware 1.12 that will keep the missus happy now haha :proud:

[john1995]

Ok got my channels back, for some reason when doing an auto scan I had to select CHORUS as opposed to NTL which usually works, oh well channels back!


Hi All

Used the above and worked fine

Scan on Cork Chorus and all the channels will return.

:party:

[bobey99]

hi,

can someone upload their channel dump for Belfast please,
i'm havin nout but problems, tried scaning on cork-chorus, but no luck,

wanna try a workin channel dump b4 i flash my box,

cheers in advance

[Bubs1873]

Im in the belfast area aswell, i was on v1.07 was scanning and picking up channels fine, but i was only getting freeview channels, when i went to a subscription channel it just had a black screen, no picture, when i realized there was a newer version, i factory reset and switched to v1.12 yesterday, after doing so i still encountered the same initial issue, anyone got any solutions! Im using the starview 4 super usb box.:giveup:

[seanmckeown]

do a factory reset

let it reboot, install on chorus, rather than ntl

menu 1570, keycode on

and that should be you

[wobblybox]

have you done, menu, 1570, emu on????


I did this and channels are back on!! On menu for sports 1st channel sayd "security fraud message" What da ~~~~ does that mean?? Its named as a channel.:celticparty:

[boomer39]

I did this and channels are back on!! On menu for sports 1st channel sayd "security fraud message" What da ~~~~ does that mean?? Its named as a channel.:celticparty:
lost me now mate.... that was months ago... you will be on nag3 now.... end of.....