SPRIDER 213 CDI START ERROR

[odyseus7]

Hi,i repair this sprider with start error 1.3 hc08 and 95p08.After a month the car come back with the same problem.I reprogram only the 95p08 and the car start again.Have someone the same problem?thanks

[vevepatronu]

maybe the battery on the car is not so good, or something is stealing current on the wiring....

[odyseus7]

battery and starter is new.

[antlio]

hI
Can you upload the files hc08 and 5p08 before with start error and after when the start error left ?

[odyseus7]

This is the dump.

[antlio]

The file after is the file when the start error came back again? The ori lock files hc08 and 5p08 repaired with start error v1.3 ?After repaired the files did you wrote the vin with star or you left the files same as from v1.3? In ecu file , missing the 3 last digits of vin number (write 00 00 00) . If you can t modified with star repair the ori lock files hc08 and 5p08 with car tool .

[odyseus7]

After repaired the files the car left with files same as from v1.3? I dont use star mercedes ,because i havent.Can i use another program to fix this problem without star.thanks

[antlio]

If you have the soft Car tool v1.6 try with it . This isn t corrupt the vin . If you haven t it try with search button in this forum .

[r-parts]

get an second hand engine computer, any 4-cylinder model will do. (A611 153 XX XX)

just solder the p08 an the f800 flash from the broken to the used computer and voila, your sprinter is as good as new.

did this today on '05 one, succes guarateed.

be aware, the computer you need is from '03 on, before '03 the computers have 24c02 and f400 flash in it and thay will not work.

[odyseus7]

Hi,the cartool is A PIECE OF SHIT for start error.