Re: Cliquer ici.exe tm3100d not working?

[npire1]

Cant seem to get this CLIQUER ICI .exe to work on my tm3100d. using the latest patch and keys. app loads but after a few positive lines of code says 1252 n cant resolve reserv.mine.nu then cant rersolve bliner-key.dyndns.org

Would be handy as cant get the canal nl at 19.2e to work as the softcam for the 3000 series does not work.

also still desperate to get bbc entertainment if anyone knows how as i am outside the astra 2d area here in slovakia.

anyone have any ideas??????.....

[mdt]

also still desperate to get bbc entertainment if anyone knows how as i am outside the astra 2d area here in slovakia.

anyone have any ideas??????.....[/QUOTE]

you could look into a protek/spiderbox or get an official bbc ent subscription which isnt to expensive. regards mdt

[npire1]

Thats helpful, thanks.

bbc card is an option but only have a tm3100d at the moment so no card slot. I have a humax foxsat hdr so could get a cam and bbc card for that i suppose.

Goooogled the protek/spiderbox and is an interesting option but do the boxes need a permanent internet connection and certain bandwidth as i only have a limited wireless broadband connection here.
I gather the protek is in theory suppoted forever but know very little about them or how they work.

[sattboy]

Cant seem to get this CLIQUER ICI .exe to work on my tm3100d. using the latest patch and keys. app loads but after a few positive lines of code says 1252 n cant resolve reserv.mine.nu then cant rersolve bliner-key.dyndns.org

Would be handy as cant get the canal nl at 19.2e to work as the softcam for the 3000 series does not work.

also still desperate to get bbc entertainment if anyone knows how as i am outside the astra 2d area here in slovakia.

anyone have any ideas??????.....

this app works great at the mo on thor sats ,when starting the app just give it time to do its thing.as for canal nl don't work for me either

[npire1]

Hi

When you say thor sats ? do you mean 0.8 and 1 west.
The softcam already opens digi without cliquer or do you mean you have managed to open the canal nl on 1west. how long did you give it to do its thing?

[sattboy]

Hi

When you say thor sats ? do you mean 0.8 and 1 west.
The softcam already opens digi without cliquer or do you mean you have managed to open the canal nl on 1west. how long did you give it to do its thing?

sorry m8 got that wrong cliquer opens most of nordic chanels on amos 0.8 there is no canal nl on thor 1 west i have same trouble opening canal nl at 19.2 east guess they changed keys again.in case you don't know when i go to a chan on amos and use cliquer say tv4 cliquer takes about 3 to 4 seconds to clear it. hope i've been of help m8

[sattboy]

Hi

When you say thor sats ? do you mean 0.8 and 1 west.
The softcam already opens digi without cliquer or do you mean you have managed to open the canal nl on 1west. how long did you give it to do its thing?

been decorating m8 i got well mixed up. 1 west is digi tv package and yes that opens with softcam and 0.8 west has digi tv package but also has canal digital packages and cliquer opens the nordic canal digital package ,well most of them on my tm 5200d i had to pump in 0.8 west and then blind scan and bam lovely nordic chans in english

[sattboy]

sorry m8 got that wrong cliquer opens most of nordic chanels on amos 0.8 there is no canal nl on thor 1 west i have same trouble opening canal nl at 19.2 east guess they changed keys again.in case you don't know when i go to a chan on amos and use cliquer say tv4 cliquer takes about 3 to 4 seconds to clear it. hope i've been of help m8

do you have your rs232 cable connected to pc while using cliquer if not ya wont get anything on 0.8 west

[npire1]

My rs232 cable is connected and works for softcam/softkey updates so guess its good.

I tried the channel you mentioned and still no joy. Thats assuming i am on tv4 0.8 west and not another copy of tv4 on 1 west using the same transponder ?. will do a bit more checking when i can.

May also try and load up my previous patch as i am using the latest one that was supposed to open canal on 19.2e but has since been confirmed as duff.

thnks for your help and good luck with the decorating..

[sattboy]

My rs232 cable is connected and works for softcam/softkey updates so guess its good.

I tried the channel you mentioned and still no joy. Thats assuming i am on tv4 0.8 west and not another copy of tv4 on 1 west using the same transponder ?. will do a bit more checking when i can.

May also try and load up my previous patch as i am using the latest one that was supposed to open canal on 19.2e but has since been confirmed as duff.

thnks for your help and good luck with the decorating..

can't understand why you cannot get nordic chans with cliquer on 0.8 west . this is what i do go to 0.8 west then go through the tv chan list and choose ESPN CLASSIC @10.807 V YOU GET SCRAMBLED PICTURE i then click on cliquer on the pc sometimes nothing happens go up or go down a chan this triggers cliquer then watch on the pc and cliquer unscrambles the chan like i said between 2 to 4 seconds.no patch needed as cliquer emulates the conax cam. FOLLOW WHAT I TOLD YOU,YOU MAY JUST BE DOING SOMETHING WRONG good luck m8

REMEMBER QLIQUER.EXE HAS TO STAY RUNNING ON THE PC

[sattboy]

can't understand why you cannot get nordic chans with cliquer on 0.8 west . this is what i do go to 0.8 west then go through the tv chan list and choose ESPN CLASSIC @10.807 V YOU GET SCRAMBLED PICTURE i then click on cliquer on the pc sometimes nothing happens go up or go down a chan this triggers cliquer then watch on the pc and cliquer unscrambles the chan like i said between 2 to 4 seconds.no patch needed as cliquer emulates the conax cam. FOLLOW WHAT I TOLD YOU,YOU MAY JUST BE DOING SOMETHING WRONG good luck m8

one other thing have you enabled SSSP on your technomate if it is not enabled it will not unscramble that might be the problem

[npire1]

No luck for me.

Could not find espn classic on 10807v but think you meant 10.809 v which is there but its not happening.

Cant find an option to enable sssp on my tm3100d but think perhaps its automatic.

Was searching sssp on google but not much help. There is a mention of a sssp pc program but i dont think i need it to run on my pc in order to do get 0.8 channels.

thanks anyway m8